Shock Line MA PREGI 35N1 Manual

SHOCK LINE S.R.L.

Head office and plant: via dei Gelsi, 65b – 86039 Termoli (CB) - ITALY

HEAT – TRANSFER PRESS

FOR FABRICS AND OTHER MATERIALS

MA PREGI 35N1

operati g a d mai te a ce i structio s

SHOCK LINE S.R.L.

Head office and plant: via dei Gelsi, 65b – 86039 Termoli (CB) - ITALY

Dear Customer,

Dear Customer,Dear Customer,

Dear Customer,

Thank you for having chosen our heat-transfer press.

The manual we have prepared for you contains all the details, features, suggestions and notices about our heat-transfer press. In

the following pages you’ll find useful hints on how to use your press correctly and everything you must know about maintenance.

ur company builds these machines with maximum care so please keep this booklet in a safe place. We’re sure that you will find

it very useful and that it will help you use your heat-transfer press through the years safely and with great results.

Yours sincerely

H CK LINE S

H CK LINE SH CK LINE S

H CK LINE S

I N D E X

Pag. 3 di 3

1 GENERAL INFORMATION 4

1.1 IDENTIFICATION OF THE HEAT-TRANSFER PRESS 4

Legal references and laws 4

Uses 4

Company data 4

Customer service 5

Assistance notices 5

1.2 DESCRIPTION OF THE HEAT PRESS AND COMPONENTS 5

Metal frame 5

Lower platen 5

Heat platen 5

Electrical parts box 5

1.3 TECHNICAL DETAILS 6

1.4 IMPORTANT SAFETY NOTICES 7

Safety rules and symbols 7

Rules for using the machine 7

Maintenance organization 8

Notices on risks when using a heat-transfer press 8

Danger from electricity 9

Danger from heat 9

2 SHIFTING, CARRYING AND SHIPPING 10

General information 10

3 USE 12

3.1 What must not be done with a heat-transfer press 12

3.2 Preliminary notices and starting up 12

3.3 Description of the control devices 12

3.4 How to use the press 14

4 TROUBLE SHOOTING AND MAINTENANCE 15

How to change the fuse 15

Electrical problems 15

5 DISMANTLING 16

6 APPENDIX A – APPLICATION GUIDE 17

G E N E R A L I N F O R M A T I O N

Pag. 4 di 4

GENERAL INFORMATION

IDENTIFICATION OF THE PRODUCT

This manual refers to the Heat-transfer press for fabrics and other materials.

Company Shock Line s.r.l.

Name of product Heat-transfer press for fabrics and other materials

Model MA PREGI 35N1

Serial number

Date of construction

Test certificate

Legal references and laws

UNI EN 292-2

UNI EN 292-2/A1

UNI EN 294

UNI EN 349

UNI EN 563

CEE irective 73/23/ (low tension)

EN 60335-1

EN 60335-2-45

CEE irective 89/336/ - . Lgs. 476 - 04/12/92 – . Lgs. 615 - 12/92 (EMC)

EN 55014

EN 61000-3-2

EN 61000-3-3

Uses

The heat-transfer press must be used for the application of thermo-adhesive products on several surfaces and materials such

as fabrics, paper, plastic, metal, wood, etc.

Company Data:

INTEC S

Head office and plant: via dei Gelsi, 65b – 86039 Termoli (CB) – Italy - Tel. +39 (0)875 751194

Customer assistance:

via dei Gelsi, 65b– 86039 Termoli (CB) – Italy - Tel. +39 (0)875 751194

E-mail:

Website:

www.shockline.it

G E N E R A L I N F O R M A T I O N

Pag. 5 di 5

Customer service

Whenever you need to communicate with our company about any technical problem you must always refer to:

• Customer I

• Model and serial number of the machine

• Exact nature of the problem

Assistance notices

In this manual we have considered all normal applications for a heat-transfer press.

o not try any kind of adjustment on the press or change its factory settings except for those described in this booklet.

Any operation on the machine like reparation, replacement of parts or maintenance, must be done by trained personnel.

DESCRIPTION OF THE HEAT PRESS AND COMPONENTS

Steel frame

The frame is made of welded steel bars and supports the weight of the press. Its characteristics make the structure

withstanding and extremely steady.

Lower platen

The lower platen is fixed to the frame and is fitted with a soft rubber pad which helps to keep any object firmly in place

while pressing. The rubber pad also allows the same distribution of pressure and heat across the entire surfaces of the

platens when pressing.

Heat platen

The upper platen is heated by an electric resistance and can be set to different temperatures. This platen allows thermo-

adhesive materials to stick on various objects. A steel protection grid is placed around the platen to prevent accidents.

Electric elements box

The electrical parts of the press are assembled inside the box placed on top of the heat platen. On the front of the box you

will find: timer and temperature adjustment device with a 3 digit display, (details on settings will follow). On the rear side

you will find the ON-OFF switch, fuses, power cable and the heat platen’s mains connection.

G E N E R A L I N F O R M A T I O N

Pag. 6 di 6

Figure 1 – parts of the heat-transfer press

TECHNICAL DETAILS

Voltage: 220 V

Power consumption: 1800 W

Input frequency: 50 Hz

Weight 70 kg

Size [LxWxH] 600 mm x 780 mm x 750 mm

Steel frame

Lower platen

Heat platen

Electric parts box

G E N E R A L I N F O R M A T I O N

Pag. 7 di 7

IMPORTANT SAFETY NOTICES

Safety rules and symbols

This booklet is not only an operating instructions manual but a very important guide for installing and

maintenance personnel and contains notices on risks that may derive from improper use.

Installing and maintenance personnel must read the following instructions very carefully. In the next part of this booklet you

will find the following symbols which warn you about danger :

warning!

warning! Notices on the proper use of the machine.

ANGER

TTENTION

DANGER

! – P

ARTICULAR ADVICE AND RULES TO PREVENT ACCIDENTS

These instructions and warnings alone cannot replace injury prevention laws but are just as important.

warning!

These warnings alone will not eliminate danger!

warning!

warning! If you don’t comply to these warnings and don’t use the machines properly

you and the people near you may get injured.

Rules for using the machine

The heat-transfer press has been built with technical know-how and complies to accident prevention laws but in spite of

this, accidents may occur to users or maintenance personnel and the machine may get damaged. You must observe

maintenance instructions since they are part of the instructions.

warning!

Before using the heat-transfer press, carefully read all of this manual and respect the

rules contained in it.

warning!

Do not modify any part of the machine. The constructor is not responsi le for any

damage occuring to people or things due to non-o servance of the rules in this manual.

warning!

This manual and all the danger signals, warnings and sym ols on the press must e

replaced if damaged or lost.

G E N E R A L I N F O R M A T I O N

Pag. 8 di 8

Maintenance organization

Maintenance personnel must read these instructions and rules before beginning to work on the press and should pay most

attention to the safety section of the manual.

warning!

Always keep this ooklet on hand near the machine.

Notices on risks when using a heat-transfer press

Always remember that working near a heat-transfer press may involve risks. Before starting any work with the machine,

concentrate on what you are going to do. Be very careful and keep your attention on what you are doing: these are

fundamental conditions for the user. If you think you’re not in excellent conditions for any reason at all, avoid working with

the heat-transfer press.

warning!

Do not use the heat-transfer press if you have een taking drugs, alcohol, etc.

warning!

Do not operate if you are not sure a out the machines safety devices.

warning!

Every time you operate on the machine’s safety devices e sure that they are

reassem led in the proper way and that they are efficient.

ANGER

SE THE PRESS ONLY IF YOU ARE SURE THAT ALL THE SAFETY DEVICES WORK

Check the heat-transfer press periodically by following the rules contained in this booklet.

ANGER

EEP HANDS

ARMS AND ANY PART OF THE BODY FAR AWAY FROM THE MOVING PARTS

AND THE HEATED PARTS OF THE PRESS

ANGER

HILE USING THE HEAT

TRANSFER PRESS DO NOT REMOVE ANY OF THE MACHINE

’

SAFETY DEVICES

. T

HIS COULD CAUSE HARM TO PEOPLE AND DAMAGE TO THINGS

THEREFORE ALL THE SAFETY DEVICES MUST BE KEPT IN PERFECT EFFICIENCY

. T

HE INJURY

PREVENTION PLAQUES AND ALL THE SAFETY RULES AND NOTICES MUST

BE KEPT WITHIN

REACH

Repairing and maintenance must be done only when the press is not working and only by qualified personnel.

After a reparation tighten up every bolt, screw and mechanical element without over-tightening and use the proper tools.

Always keep the press clean and use it in a floodlit area.

isposal of changed parts must be done with safe and ecological procedures.

G E N E R A L I N F O R M A T I O N

Pag. 9 di 9

Danger from electricity

Make sure that the machine is connected to a valid ground rod.

The grounded electrical line must be controlled by trained personnel before connecting the heat-transfer press.

All operations concerning electric wiring must be carried out by trained personnel.

Use only original fuses with correct amperage rating.

ANGER

EFORE ANY INSPECTION

MAINTENANCE OR REPARATION BE SURE TO DIS

CONNECT THE

MACHINE FROM THE ELECTRIC OUTLET

Danger from heat

The upper platen of the press reaches high temperatures and must never in any way get in contact with any part of the body

before it cools down. The platen’s temperature level can be controlled on the display. The platen’s protection grid and the

screws can also get very hot.

ANGER

EFORE PLACING ANY OBJECT ON THE LOWER PLATEN

SHIFT ASIDE THE HEAT

PLATEN

COMPLETELY WITHOUT TOUCHING THE HOT PARTS

S H I F T I N G , C A R R Y I N G A N D S H I P P I N G

Pag. 10 di 10

SHIFTING, CARRYING AND SHIPPING

This part of the manual contains information on shifting, carrying and transporting the press. These manoeuvres can be

dangerous and may expose users to extremely serious injuries. Carefully read the following notices.

General information

All the information about shipping is on the labels on the packing. Here you will find details and instructions on how to

carry, lift, move or transport the heat-press.

These labels contain the following information:

• model

• addressee and order reference

• packing total weight

• packing size

• possibility of stacking

• opening instructions (no pointed tools)

• lifting instructions

The packs are made of a wooden platform on which the press is fixed with plastic supports. The press is wrapped up in

clear nylon and covered by a stiff cardboard box. The wooden platform can be shifted with a fork-lift.

On request it is possible to have a wooden case.

The packs must be shifted with fork-lifts or other means especially meant for this kind of operation.

warning!

Make sure that when press is on the lift it is securely fixed and sta ile.

warning!

Follow the instructions efore any kind of shifting.

If you have to shift the press manually, please use protective shoes and gloves that give you a secure grip especially in case

of greasy/oily surfaces.

ANGER

EVER LIFT THE HEAT

TRANSFER PRESS BY HAND

TWO STRONG AND HEALT

HY PEOPLE ARE

NECESSARY

The press must be lifted by a crane with proper capacity and rope slings or chains.

warning!

Make sure that the chain or sling’s resistance are adequate.

warning!

Make sure that the slings are in excellent conditions.

warning!

The sling’s hooks must have a safety device to prevent rope slipping away

warning!

When lifting, avoid any movement that could damage the machine’s parts or external

protection..

warning!

Lift the press slowly avoiding sudden movements. The press must not sway.

ANGER

ANGEROUS HANGING WEIGHT

. I

T IS ABSOLUTELY FORBIDDEN TO STAY UNDERN

EATH OR

NEAR THE PACKING

SHIPPING AREA

Transport the machine only with an adequate vehicle with adapt capacity. You must fix the press inside the vehicle.

warning!

Make sure that the cargo isn’t too ig for the vehicle and that it doesn’t “stick out” of it.

Tabla de contenidos

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual