Shinko CHC-S1245-5 Manual de uso y cuidado

YQE8-J0093E

Date: March 8, 2005

Revised:

Revision: First Edition

Confirmation Signature

(Shinko Electric Co., Ltd.)

Approved Inspected Drew

(Customer： )

Shinko Electric Co., Ltd.

Digital Photo Printer

CHC-S1245-5

Maintenance Parts

Replacement Procedures

YQE8-J0093E

Revision Record

Revised Date Correction

symbol

Descriptions ECN No.

3/8/2005 －First Edition

YQE8-J0093E

Contents

1．Scope.....................................................................................................................................................1

2．Applicable Models................................................................................................................................1

3．Related Documents..............................................................................................................................1

4．Tools Required.....................................................................................................................................2

5．Replacement Procedures.....................................................................................................................3

№ PartName PartNumber

1PCB HSSV7-CONT-F ASSY 164-11-09756 ･････････5

2PCB HSSV7-LCDSOSA-F ASSY 164-11-09757 ･････････6

3PCB HSSV7-JUNCTION-F ASSY 164-11-09758 ･････････7

4DC Power Supply 164-11-09625 ･････････8

5Thermal Head Assy 164-11-09770 ･････････9

6DCMotorAssy(RibbonWinding) 164-11-09627 ･････････11

7DCMotorAssy(ThermalHeadUp/Down) 164-11-09628 ･････････12

8DCMotorAssy(PinchRollerUp/Down) 164-11-09629 ･････････13

9DCMotorAssy(PaperFeedPinchUp/Down) 164-11-09630 ･････････14

10 Paper Cutter Unit 164-11-09760 ･････････15

11 Electromagnetic Clutch 164-11-09418 ･････････16

12 Ribbon Brake 2 Assy 164-11-09634 ･････････17

13 DC Fan (Thermal Head Cooling) 164-11-09765 ･････････18

14 Platen Assy 164-11-09766 ･････････19

15 Feed Roller Assy 164-11-09767 ･････････21

16 Ejection Roller Assy 164-11-09768 ･････････23

17 Pinch Roller Assy 164-11-09769 ･････････24

18 Timing Belt (Feed Roller Drive) 060-91-1803-101 ･････････26

19 Timing Belt (Feed Roller Drive) 060-91-1782-126 ･････････27

20 Timing Belt (Roll Paper Drive) 060-91-1810-256 ･････････28

21 Feed Roller Guide Assy 164-11-09761 ･････････29

22 Head Sensor Assy 164-11-09415 ･････････31

23 Pinch Roller Sensor Assy 164-11-09762 ･････････32

24 PCB HSSV7-SEN2-F ASSY 164-11-09764 ･････････35

25 Cleaning Roller Assy (Paper Feed Side) 164-11-09771 ･････････36

26 Cleaning Roller Assy (Paper Ejection Side) 164-11-09772 ･････････37

27 Ribbon Sensor Assy 164-11-09763 ･････････38

28 PCB HSSV7-USBCON-F ASSY 164-11-09759 ･････････39

29 DC Motor Assy (Ejection Pinch Up/Down) 164-11-09823 ･････････40

YQE8-J0093E1

1．Scope

This document describes the parts replacement procedures that are intended to ease the

task of parts replacement.

2．Applicable Model

CHC-S1245-5 Series

3．Related Documents

- Maintenance Manual YQE8-J0092E

- Operation Manual YTE8-J0124E

YQE8-J0093E2

4．Tools Required

4.1 Parts Required

№Name Parts No. Q’ty Supplier Ｎｏｔｅ

1Head Cleaning Kit 060-91-7146 1

2Isopropyl Alcohol Some Available locally

3Cloth Some Available locally

4Grease (Moricote PG-671) Some Available locally

5Wire Tire 060-64-8011 20

4.2 Tools

Name Model Q’ty

Phillips Screwdriver #0 (Micro-driver) 1

Phillips Screwdriver #1 1

Phillips Screwdriver (small) #2 (Length less than 100mm) 1

Phillips Screwdriver #2 1

Phillips Screwdriver #2 (Length more than 300mm) 1

Phillips Screwdriver #2 (ratchet type) 1

Flat-blade screwdriver (small) 2.5×100 1

Flat-blade screwdriver (small) 4.5×50 1

Nipper 1

Pliers 1

Scissors 1

Digital Voltmeter or Tester For the shape, see below. 2

Clip for Digital Voltmeter

4.3 Measuring Instrument Required

Name Ｎｏｔｅ

Digital Voltmeter 0.1V unit of measurement

YQE8-J0093E3

5．Replacement Procedures

5.1 Removing Covers

To replace with the part, remove covers according to the following procedure.

[Step 1] Remove 6 screws (M3x6) which hold Side Covers L and L2, then remove Side Covers L

and L2.

[Step 2] Remove 5 screws (M3x6) which hold Side Covers R and R2, then remove Side Covers R

and R2.

Screw

Side Cover L

Side Cover L2

Screw

Side Cover R2

Side Cover R

Caution

Be sure to turn off the power switch and remove the power plug from the outlet to

avoid any electric shock.

YQE8-J0093E4

[Step 3] Remove 4 screws (M3x6) which hold the Front Cover and 1 screw (M3x6) which holds

the ground wire, then remove the Front Cover.

[Step 4] Remove 4 screws (M3x6) (2 for right and left each), which hold the Upper Cover, then

remove the Upper Cover.

Front Cover Screw

Screw

Screw Screw

Upper Cover

Screw Ground Wire

YQE8-J0093E5

Maintenance Parts Replacement Procedures 1／1

Parts Name PCB HSSV7-CONT-F ASSY Part No. 164-11-09756

Tools Phillips Screwdriver (#2)

[Step 1] Remove Side Covers L and R and Front Cover.

[Step 2] Remove 3 connectors at the left side of PCB HSSV7-CONT-F Assy.

[Step 3] Remove 2 screws (M3x6) at the front and 1 screw on the back (M3x6), which hold the PCB

Holder.

[Step 4] Pull the PCB Holder slightly to the front, remove 8 connectors at PCB HSSV7-CONT-F

Assy, remove 4 screws, then remove PCB HSSV7-CONT-F Assy from the PCB Holder.

[Step 5] Replace the new PCB HSSV7-CONT-F Assy and assemble in reverse order.

Inspection - Verify that the connectors are properly connected.

- Perform the test print and verify that all the operations are normal.

Connector

Screw Screw

Screw

CN18 CN8 CN12

CN7, CN6, CN10, CN9, CN14, CN4, and CN13 from the left

CN3

YQE8-J0093E6

Maintenance Parts Replacement Procedures 1／1

Parts Name PCB HSSV7-LCDSOSA-F ASSY Part No. 164-11-09757

Tools Phillips Screwdriver (#2)

[Step 1] Remove Side Covers L and R and Front Cover.

[Step 2] Remove two white collars which cover buttons of PCB HSSV7-LCDSOSA-F Assy.

[Step 3] Remove the connector (CN21) at PCB HSSV7-LCDSOSA-F Assy, remove 2 screws (M3x6)

which hold the PCB, then remove PCB HSSV7-LCDSOSA-F Assy from the printer.

[Step 4] Replace the new PCB HSSV7-SOSALCD-F Assy and assemble in reverse order.

Be sure to peel the protective vinyl away from the LCD surface.

Inspection - Verify that the connectors are properly connected.

- Perform the test print and verify that all the operations are normal.

Connector (CN21)

Collar

Screw

YQE8-J0093E7

Maintenance Parts Replacement Procedures 1／1

Parts Name PCB HSSV7-JUNCTION-F ASSY Part No. 164-11-09758

Tools Phillips Screwdriver (#2)

[Step 1] Remove Left Side Cover.

[Step 2] Remove 12 connectors at PCB HSSV7-JUNCTION-F Assy.

[Step 3] Remove 2 screws (M3x6) which hole PCB HSSV7-JUNCTION-F Assy and remove PCB

HSSV7-JUNCTION-F Assy from the printer.

[Step 4] Replace the new PCB HSS-JUNCTION Assy and assemble in reverse order.

Inspection - Verify that the connectors are properly connected.

- Perform the test print and verify that all the operations are normal.

Screw

Connector CN50 (other connectors are

CN39, CN40, CN52, CN41, CN42,

CN43, CN48, CN45, CN46, CN53, and

CN49 clockwise from CN50.)

Tabla de contenidos

Otros manuales de Impresora de Shinko

Shinko

Shinko CHC-S9045 Manual de usuario

Shinko

Shinko CHC-S1245 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario