Shining 3D EinScan Pro 2X 2020 Manual de usuario
Multifunctional Handheld 3D Scanner
Getting Started with EinScan Pro 2X 2020
EinScan Pro 2X
Quick Start Guide
2020
Preparation
Standard Pack
Industrial Pack (optional)
Color Pack (optional)
Markers
Scanner body Power adapter
Calibration board
Power cable
Calibration board support
USB drive
Turntable Tripod Scanner tray
USB cable Power adapter Power cable
Texture camera
Device List
Markers remover /
Module port cap lifter Phone screen mount
Cable clip
*Please only use water to clean the calibration board, avoid touching any corrosive liquid.
Preparation
1. Standard Pack
Installation
Hardware Installation
STEP
01 Turn on the device and connect it to the computer
through USB 3.0 port.
Recommended
OS
Graphics Card
Video Memory
Processor
Memory
Interface
Win10, 64bit
NVIDIA GTX/RTX series cards，higher or equal to GTX 1080
>4G
I7-8700
64G
high-speed USB 3.0
Installation
Hardware Installation
2. Industrial Pack
STEP
01
STEP
02
Plug the USB cable into the
USB port of the turntable
and connect it to the
computer. Connect the
power cable to the
turntable.
3.Color Pack
4. Operation Environment
STEP
02
STEP
01
Insert the Color Pack and lock it
with a rotary lever.
Fasten the scanner tray onto the
tripod and place the scanner on
the tray.
Hold the device upright and remove
the USB port cover. The cover is
located near the logo on the right
side of the device.
Avoid direct sunlight or too bright of light indoors.
Make sure the scanned object and table are stable. （For Fixed Scan）
Software Download
Software Installation
Or do local activation and find
the license in the USB drive.
Attention: If you install another device of different serial number,
the software will automatically notify users to activate this device.
STEP
01
STEP
02
Download the software and user manual from
support.shining3d.com or
www.einscan.com/software-download
Online Activation
Online Activation
Local Activation
Local Activation
Run the installer
License Activation
Double click software installation
icon to install the software.
After successful installation, when
the device is correctly connected,
double-click to open the software
and activate the device. The
format of activation is “online
activation”. Make sure your
computer is connected to the
Internet.
Calibration
Camera Calibration
Follow the instruction on the
software to place the calibration
board in 5 different positions.
Hold the scanner vertically and
cover the screen range.
STEP
01
STEP
02
STEP
03
STEP
04
STEP
05
Calibration
White Balance
Calibration
Only required for Color Pack
Hold the scanner vertically to the
back side of calibration board
(white) and adjust the distance
until you find the proper
distance.
The first time installing the software , calibration is required by default.
Calibration is also required for the following:
1.Device Change
2.After device enduring bumpy transportation
3.After device accuracy decreases
4.Device being uncalibrated for a long time, for example, 15 days.
5.When using the Color Pack, the texture camera’s position has been
changed.
Fixed Scan
Select Align Mode
Turntable Coded
Targets Alignment
Markers
Alignment
Feature Alignment
Fixed Scan
Tips:
Shift + Mouse Left, the
selected part turns red, edit
the 3D data using buttons
on the right.
New Project or Open Project
Adjust Angle and Distance
Adjust Brightness
Scan
Edit
Continue Scanning
Auto Align
Correctly or Not?
Finish or Not?
N
N
Y
Y
Finish
Mesh Watertight / Unwatertight
Save Mesh (OBJ. STL. PLY. etc.)
Post Processing
Manual Align
With Turntable Without Turntable
Save Separated Point Cloud
(separated ASC)
Handheld HD Scan
Handheld HD Scan
New Project Open Project
Preview
Scan
Edit
Finish
Mesh
Tips
Shift + Mouse Left, the selected
part turns red, edit the 3D data
using buttons on the right. The edit
function is only activated after
selecting data.
Save point cloud (ASC)
Post Processing
Tips
Click the start button once to
preview
Click the start button once again
to start scan;
To adjust the brightness before or
during scan, click the start button
twice, and using “+” &”-” to
highlight or shadow;
Keep the scanner vertically to the
object surface;
Optimize the distance by the color
range on the screen or on the
scanner. Green color shows an
appropriate distance.
Watertight / Unwatertight
Select Align Mode Select ResolutionSelect Texture Select Operation Mode
Save Mesh
(OBJ. STL. PLY. etc.)
Handheld Rapid Scan
Preview
Scan
Edit
Finish
Mesh
Tips
Shift + Mouse Left, the selected
part turns red, edit the 3D data
using buttons on the right. The edit
function is only activated after
selecting data.
Save Mesh
(OBJ. STL. PLY. etc.)
Save Point Cloud (ASC)
Handheld Rapid Scan
Open ProjectNew Project
Select Align Mode Select ResolutionSelect Texture Select Operation Mode
Watertight / Unwatertight
Tips
Click the start button once to
preview;
Click the start button once again
to start scan;
To adjust the brightness before or
during scan, click the start button
twice, and using “+” &”-” to
highlight or shadow;
Keep the scanner vertically to the
object surface;
Optimize the distance by the color
range on the screen or on the
scanner. Green color shows an
appropriate distance.
Post Processing
Otros manuales de Escáner de Shining 3D
Shining 3D
Shining 3D EinScan-Pro+ Manual de usuario
Shining 3D
Shining 3D EINSTAR Manual de usuario
Shining 3D
Shining 3D Transcan C Manual de usuario
Shining 3D
Shining 3D EinScan HX Manual de usuario
Shining 3D
Shining 3D EINSTAR Manual de usuario
Shining 3D
Shining 3D Aoralscan 3 Manual de usuario
Shining 3D
Shining 3D EinScan-SP Manual de usuario
Shining 3D
Shining 3D EinScan HX Manual de usuario
Shining 3D
Shining 3D FreeScan UE Manual de usuario
Shining 3D
Shining 3D EinScan-Pro+ Manual de usuario
Shining 3D
Shining 3D EinScan-Pro Series Manual de usuario
Shining 3D
Shining 3D EinScan H Manual de usuario
Shining 3D
Shining 3D EXScan H Manual de usuario
Shining 3D
Shining 3D EinScan Pro HD Manual de usuario
Shining 3D
Shining 3D EinScan-SE Manual de usuario
Shining 3D
Shining 3D FreeScan UE Pro Manual de usuario
Shining 3D
Shining 3D EinScan Pro 2X Manual de usuario
Shining 3D
Shining 3D EinScan H Manual de usuario
Shining 3D
Shining 3D FreeScan UE Manual de usuario
Shining 3D
Shining 3D EinScan Pro 2X Manual de usuario
