XL/MDR-RD-094
Aoralscan 3_Manual_V1.1 - 7 -
and reliable for operation.
- Function control and display
Function control: After pressing the scanning button, determine whether the front end of the
scanner flashes normally.
Display: Under normal working conditions, when the scanner is opened for scanning, the two-
dimensional and three-dimensional imaging of the scanned object (such as teeth) can be seen on
the display respectively.
3D image processing: After the 3D stereo image is generated, the 3D image can be cropped
as needed by using the relevant buttons on the top, bottom and right side.
- Software features
1. Wizard type scanning operation process with backward function.
2. Establishing demand information, which may include: jaw position information, tooth
position information, and treatment modality information.
3. Scanning the teeth according to the demand information.
4. Editing function of the scanned result data, including: hole repair, data selection.
5. scanner with undercut, occlusion, texture and smoothing functions (optional).
6. scanner with orthodontic simulation function (optional).
7. scanner with model making (Accu Design) function (optional).
8. scanner with report examination function (optional).
- Performance
Dental scan imaging: The scanner scans the teeth and gingiva to form a 3D digital model.
Accuracy: Under normal conditions, the scanner is used to scan against a standard (e.g., a
plaster standard known to be similar in size to a tooth), obtain its three-dimensional stereoscopic
data, and measure key dimensions to obtain measured values.
Heating of the entrance part of the scanner tip: Under normal working conditions, the
intraoral scanner should have heating and anti-fogging function when entering the mouth under
working condition.
- Data interface
USB 3.0, data storage format shall include 3D digital model format .stl, .ply and .obj.
Main structural composition
The Scanner consists of Scanner body, scanner tip, USB 3.0 repeater, power adapter, cradle,
USB cable, calibrator（optional）, software, and encryption module. The software carrier is USB
