SHENZHEN VDWALL CO.,LTD www.videowall.cn
ADD: Room 1001,10th Floor, Tower 4, Fangda-City, Longzhu 4th Road,
Nanshan District, Shenzhen, China TEL: 0755-26750210
____
4
Category Buttons Description
Menu setup
button
Setup Menu button. When A63 in operation mode，press this button to enter menu setup
Ok
Knob button, rotate this button to change configuration value or press this button to confirm and apply
configuration
Up and Down selection button. After enter menu setup, press this button to select menu item.
When A63 in operation mode, press this button directly to adjust output image brightness.
Return button. Press this button to exit present menu and return to previous menu，
until A63 exit menu setup and enter operation mode.
Display mode
select button
DM-0、 DM-1、DM-2
Display mode selection button. Preset display mode parameters include: window composition,window
signal source,window overlay sequence,window size&position，In operation mode, press DM-0、
DM-1、DM-2 to switch different display mode；In menu setup mode，press DM-0、DM-1、DM-2 so as
to save present setup parameters automatically at target mode.
DM+
Extended display mode selection button，press this button to enter more preset mode selection menu, the
menu includes：DM0、DM1、DM2、DM3、 DM4、DM5、DM6、DM7、 DM8、DM9、DM10、
DM11. Select target display mode by pressing ↓、↑ button.
TAKE When A63 in switcher mode(CfgM0), “Preselect+TAKE” switching is available. In Take switching mode,
user can quickly switch display mode between main output(Out B) and preview output(Out A) without
latency.
