Shenzhen Sricctv Technology Sricam Manual del propietario
EN/ES/IT/FR/DE
SriHome202107-D7.0
RR
IP Camera
Quick User Manual
EN
01
Android iOS
Step1. SriHome App Installation
Scan the QR code to download “SriHome” App.
Search for “SriHome” on Google Play or iOS App Store.
Method 1:
Method 2:
Step2. Registration & Login on SriHome App
Make sure of the followings:
- Mount the antenna in vertical position (only for outdoor cameras).
- If your cameras are 2.4GHz WiFi, your phone must be connected to 2.4GHz WiFi.
- Check that DHCP on the router is enabled.
Before starting setup
Step3. Connect the camera to the network
- For videos on how to set up our cameras, please visit: www.sricam.com/srihome/videos
Products Introduction
RESET
TF Card Slot
TF Card Slot
RESET
TF Card Slot
RESET
TF Card Slot
MicroSD
EN
02
1. Turn on the camera
The camera will emit a continuous “beep” after 30 seconds.
Note: If there is no “beep” sound,
keep holding the “RESET” button for 5 seconds until you hear a long “Beep”
Next
Input the device’s ID
H00***********
3-23-1
Device Add
2. Add the camera to the APP
When you hear the continuous “beep”, follow the instructions of the SriHome APP to add the
device, as in the figure:
3-3
2
Next
Input the device’s ID
Note: Only some models support 5G WiFi
Connect your phone to WiFi
Input Wi-Fi password
H00***********
office-wifi-2.4G
***********
WiFi QR Connect
3
Power
RESET
1
RESET
EN
03
Next
WiFi QR Connect
Distance between QR code and
camera lens is 10-30cm. When
you hear ‘Bi’ sound, click ‘Next’.
2021-06-15 16:25:20
１
Home
9.
Local record
Introduction for monitoring interface:
Device
Modify
Playback
10.
Screenshots
11.
Speaker
12.
Microphone
3-5 3-6
Input device name to search device
Device
- If you are unable to add a device on the app, please make sure the following:
1. Before adding a device, you will hear continuous “beep”
(if there is no sound, RESET the device)
2. Enter the correct Wi-Fi password. (It is recommended that wireless passwords do not use
special characters
!"£%
)
3. When you hear the “beep” sound, click “Next” in step 3-4.
SD
- If the device could not be added to the “SriHome” app via “WiFi QR Connect” for
many times, please refer to FAQ1 “WiFi Hotspot Connect” on page 4 to add the device
Trouble shooting:
Settings
3-4
1.
App Settings
2.
Scan code
3.
Split Screen
4.
Add
SD
5.
Settings
6.
Full screen
7.
Up & down
8.
Resolution
4
1 2 345
67
10 11
8 9
12
EN
04
FAQ-2FAQ-1 FAQ-3
1). Turn on the device and wait 30 seconds, the camera will generate a WiFi hotspot:
Camera WiFi SSID:
IPC _ ******, WiFi Password: 12345678
2). Go to your phone's WLAN settings and connect your phone to the camera's WiFi hotspot.
FAQ1: How to add camera to app via WiFi Hotspot
Enter Password
Password
Sricam office
Settings Cancel Join
CHOOSE A NETWORK
Wi-Fi
Wi-Fi
12345678
TP-LINK_AFCG
Paladin Tek-2.4G-BRTV
Boss
Sricam office
IPC_*******
Sricam office123
Settings
CHOOSE A NETWORK
Wi-Fi
Wi-Fi
TP-LINK_AFCG
Paladin Tek-2.4G-BRTV
Boss
This WLAN network has no Internet
access. Connect anyway?
IPC_*******
Notice: Before using the WiFi hotspot to add the device in the app, you need to turn off the
3G / 4G / LTE mobile data of the smarphone first.
Step 1: Connect your phone to the camera's WiFi hotspot
Note: Enter WiFi
Password:12345678
CANCEL CONNECT
Note: If the camera's WiFi hotspot is not found in the phone's AVAILABLE NETWORKS list,
please reset to factory settings and try again.
EN
05
FAQ-4
Device Device
Open the “SriHome” App, tap “+”, follow the instructions to add the device.
888888
3
NextNext
Input the device’s ID
Please name the device
Input device password
(Default:888888)
Connect the camera to
Wifi network?
Cancel
Setup WiFi
A00***********
Home
FAQ-5
2
Input the device’s ID
A00***********
Device
Note:
Next
FAQ-6
Step 2: Add the device to the App
4
FAQ-7 FAQ-8 FAQ-9
Sricam_office
Cancel
**********
Confirm
Setup WiFi
Network Settings Network Settings Network Settings
TP-LINK_AFCG
Paladin Tek-2.4G-BRTV
Sricam_office
Paladin Tek-2.4G-BRTV
TP-LINK_AFCG
Paladin Tek-2.4G-BRTV
Paladin Tek-2.4G-BRTV
Available WiFi List
Network Config WiFi Hotspot Mode
TP-LINK_AFCG
Sricam_office
Paladin Tek-2.4G-BRTV
Available WiFi List
Network Config
Wireless network
Enable DHCP
IP Address 192.168.1.121
Subnet 255.255.255.0
Gateway 193.168.1.1
DNS1 192.168.1.1
DNS2 8.8.8.8
6
5
EN
06
Add share user
User authorization Visitor
Operator
Visitor
Input new user’s APP ID
User Remarks
FAQ2:
Share the camera with other users
To protect the user's privacy, the first user is an administrator by default. Other users accessing
the camera need administrator permission, or they cannot login even with ID and password.
The way to get permission is as follows:
Access the “SriHome” App, tap Settings -> Visitor Management -> Add.
There are 2 types of permissions:
Operator:
Live video view, set time, alarm, record and network.
Visitor:
Viewing video only in real time
Note: You can find the user's App ID in
App Settings
Share User
Visitors Management
Add
Settings
Settings
System
Time Settings
Video Settings
Alarm Settings
Record Settings
Network Settings
Security Settings
Visitors Management
Home
FAQs:
1. How to set up recordings on micro SD.
2. How to add the camera on your second phone.
3. How to set the motion detection alarm.
4. The camera does not detect the micro SD.
5. Multi-view on srihome App.
6. The camera's Wi-Fi is unstable and often offline.
More FAQs Please visit:
www.sricam.com/srihome/faq
If want to know more, please visit YouTube: SriHome IPC
ES
07
Paso1. Instalación de la aplicación SriHome
Escanee el código QR para descargar la aplicación “SriHome”
Busque la aplicación “SriHome” en Google Play o iOS App Store.
Método 1:
Método 2:
Paso2. Regístrese y acceda a la aplicación SriHome
Asegúrese de lo siguiente:
- Monte la antena y colóquela verticalmente (solo para cámara exterior).
- Su router tiene habilitado DHCP.
- Si sus cámaras son inalámbricas de 2.4GHz, su teléfono debe estar conectado a una red
inalámbrica de 2.4GHz
Antes de empezar la configuración
Android iOS
Paso3. Añadir la cámara a la red
- Para ver videos sobre cómo configurar cámaras IP, visite el sitio web: www.sricam.com/srihome/videos
Presentación del producto
Ranura para tarjeta MrcoSD
Ranura para
tarjeta MrcoSD
Ranura para
tarjeta MrcoSD
Ranura para
tarjeta MrcoSD
RESET RESET
RESET
MicroSD
RESET
08
ESES
1. Enciende la cámara
La cámara emitirá un “bip” continuo después de 30 segundos.
Nota: Si no hay un “bip”, mantenga presionado el botón “RESET” durante 5 segundos hasta que
escuche un “Bip” largo.
Cámara
2. Añadir la cámara a la APLICACIÓN
Cuando escuche el “bip” continuo, siga las instrucciones de la aplicación SriHome para agregar el
dispositivo, como se muestra en la figura:
3-3
Siguiente
Introduzca ID de los dispositivos
H00***********
3-2
Conectar WiFi QR
3-1
2
Siguiente
Introduzca ID de los dispositivos
Nota: solo algunos modelos
admiten WiFi 5G
Por favor conecte su teléfono a WiFi
Entrada de contraseña Wi-Fi
H00***********
office-wifi-2.4G
***********
Conectar WiFi QR
3
Energía
RESET
1
1. Ajustes de Aplicacion
2. Código de escaneo
3. Pantalla dividida
4. Agregar
ES
09
Home
Dispositivo
Modificar
Reproducción
Ingrese el nombre del dispositivo para buscar el dispositivo
Ajustes
Siguiente
Conexión WiFi QR
4
La distancia entre el código QR y la
lente de la cámara es de 10-30 cm.
Cuando escuche el sonido 'Bi', haga
clic en 'Siguiente'.
2018-06-15 16:25:20
１
Introducción a la pantalla de monitorización:
Dispositivo
3-4
10. Captura de pantalla
11. Altavoz
12. Micrófono
5. Configuraciones
6. Pantalla completa
7. Arriba y abajo
8. Resolución
SD
SD
- Si no puede agregar un dispositivo a la aplicación, verifique lo siguiente:
1. Antes de agregar un dispositivo, escuchará “pitidos” continuos (si no hay sonido, reinicie el dispositivo)
2. Ingrese la contraseña de Wi-Fi correcta. (Se recomienda que las contraseñas inalámbricas no utilicen
caracteres especiales)
3. Cuando escuche el “bip”, haga clic en “Siguiente” en el paso 3-4.
- Si no pudo agregar el dispositivo a la aplicación “SriHome” a través de “WiFi QR Connect” varias veces,
consulte la pregunta frecuente 1 “Conexión WiFi Hotspot” en la página 10 para agregar el dispositivo.
Solución de problemas:
9. Grabación local:
1 2 345
6710 11
8 9
12
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
