Shenzhen Alersec Technology AL200-NVR Manual de usuario

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

Operating Instruction for AL200-NVR

4-Channels Hybrid HD MDVR

Dear users, functional setting of this device requires

some expertise. Therefore, please carefully read and

fully understand the instruction before use.

Thank you for choosing our product. Difference between models or product upgrading

may result in appearance or features different from those described in the instruction;

thus, it all depends on the actual product or you can contact Alersec. Information

contained herein is subject to irregular change without prior notice.

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

Statement

This instruction is applicable for AL200 -NVR 4-Channels hybrid HD series MDVR products.

Information contained herein may not be technically accurate. If any conflict between the product and the

instruction is found during usage, it all depends on the actual product or you can contact Alersec, Information

contained herein is subject to irregular change without prior notice.

Usage Precautions

1. Installation Environment

To extend the service life, please try to install the device in a place where vibration is weak;

To ensure normal heat dissipation, do not install the device in a poorly-ventilated area (such as trunk), and

also keep about 15 cm away from other objects on the same level;

The device shall be horizontally installed and protected against water, humidity and lightning; in addition,

keep the vehicle still during installation to prevent damage to the device due to falling off;

To ensure safe operation, keep the device, camera, cables and other accessories out of reach of passengers

and driver.

2. Avoid Electric Shock and Fire

8V-36V DC power supply is used for this device. Please note the positive and negative terminals during

connection to prevent short circuit;

Please power the device off before connecting any peripheral ;

Do not touch the power supply and the device with wet hands;

Do not spray liquid on the device to prevent internal short circuit or fire;

Do not place any other device directly on top of the camera;

Do not disassemble the housing without authorization to avoid damage or electric shock;

3. Transport and Handling

To prevent incidental damage to the device during transport. Handle the device with due care. The original

packaging materials and carton are preferred;

Power the device off before handling or part replacement to prevent any damage;

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

Table of Contents

一、Product Description...................................................................................................................................... - 1 -

1. Product Overview..................................................................................................................................... - 1 -

2. Introduction to Mainframe....................................................................................................................... - 2 -

3.Introduction to Main Keys of Your Remote Control.................................................................................- 4 -

二. Device and Installation................................................................................................................................... - 6 -

1. Installation................................................................................................................................................ - 6 -

1.1: Open the protective cover..............................................................................................................- 6 -

1.2: Prepare the HDD........................................................................................................................... - 6 -

1.3: Insert the HDD.............................................................................................................................. - 6 -

1.4: Install SIM and SD cards...............................................................................................................- 7 -

1.5: Lock the electric lock.................................................................................................................... - 8 -

1.6: Install the mainframe.....................................................................................................................- 8 -

1.7: Install GPS, 3G/4G, WiFi antenna................................................................................................ - 9 -

1. 8: Connect the power cord................................................................................................................- 9 -

1.9: Connect the display output unit...................................................................................................- 10 -

1. 10: Alarm input and output cable................................................................................................... - 10 -

1. 11: RS232/RS485 device connection............................................................................................. - 12 -

1.12: Connect PTZ..............................................................................................................................- 12 -

2. Connection Method of This Solution..................................................................................................... - 13 -

三. Basic Settings................................................................................................................................................- 15 -

1. Basic Setup:............................................................................................................................................ - 15 -

1.1:Basic Setup................................................................................................................................... - 15 -

1.2: set Date & Time...........................................................................................................................- 16 -

1.3: Set Vehicle INFO.........................................................................................................................- 16 -

1. 4: User Setup.................................................................................................................................. - 17 -

1.5: Network Setup............................................................................................................................. - 18 -

1. 6: Display Setup..............................................................................................................................- 18 -

2.Channel Mode..........................................................................................................................................- 19 -

3. Record Setup:..........................................................................................................................................- 20 -

3.1: Enter the Record Setup interface.................................................................................................- 20 -

3.2: Record Basic Setup..................................................................................................................... - 21 -

3. 3: Main Code.................................................................................................................................. - 21 -

3.4: Sub-Stream Setup........................................................................................................................ - 22 -

3.5: Recording Schedule (to be set in timing record mode)...............................................................- 23 -

3.6: Mirror Record..............................................................................................................................- 23 -

3.7: SD Record................................................................................................................................... - 24 -

3.8: IPC............................................................................................................................................... - 24 -

4. Alarm Setup:........................................................................................................................................... - 25 -

4.1: Enter the Alarm Setup interface.................................................................................................. - 25 -

4.2: Sensor Setup................................................................................................................................ - 26 -

4. 3: Speed Setup................................................................................................................................ - 26 -

4.4: G-sensor Setup.............................................................................................................................- 27 -

4.5: Temperature Setup.......................................................................................................................- 27 -

4. 6: ALARM OUT Setup...................................................................................................................- 27 -

4. 7: Motion Detection........................................................................................................................- 28 -

4. 8: Other Alarm................................................................................................................................ - 29 -

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

5. Configuration:.........................................................................................................................................- 30 -

5.1:Enter system tools........................................................................................................................ - 30 -

5. 2: Configuration management........................................................................................................ - 30 -

5.3: Formatting................................................................................................................................... - 30 -

5.4: Log Search...................................................................................................................................- 31 -

6.Peripheral Setup:......................................................................................................................................- 32 -

6.1: Enter the Peripheral Setup interface............................................................................................- 32 -

6.2: PTZ.............................................................................................................................................. - 32 -

6.3: Wireless Setup............................................................................................................................. - 32 -

6.4: WiFi Setup................................................................................................................................... - 33 -

6.5: Oil Setup......................................................................................................................................- 34 -

6.6: Serial Device Setup..................................................................................................................... - 34 -

7. Record Search:........................................................................................................................................- 35 -

8. System Information:............................................................................................................................... - 36 -

Appendix 1: Common Questions and Answers (QA) for MDVR..................................................................... - 36 -

Appendix 2: AL200-NVR Memory Space Reference........................................................................................- 40 -

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

- 1 -

一、Product Description

1. Product Overview

AL200-NVR is a hybrid HD MDVR with combined 4 Channels of HD and 4 Channels of analog audio &

video recording and replaying specially designed for vehicles. The product adopts ARM DSP fast dual-c. ore

processor running on the Linux embedded OS, and also integrates the most advanced H.264 video

encoding/decoding in IT industry, 3G/4G network, GPS and WiFi, as well as fail-safe protection, HDD shock

absorption, HDD heating, wide voltage features. It is extensively applied in public buses, logistics vehicles,

school buses, police cars, financial convoy cars and fuel tankers.

Features:

H.264 image compression encoding supported, AL200-NVR PAL: 200fps@720P,

Both AL200-NVR support multi-mode HD video access (see technical specifications for details)

Air video interface is used to provide high reliability and strong anti-seismic property

Built-in 3G/4G network, GPS, WiFi (optional)

Built-in 2.5" HDD, max. 2TB HDD supported, damping technique

1 HDMI, 2 CVBS video outputs, maximum 1080P supported

Good scalability, 1 RS485 interface, 2 RS232 interfaces

8V-36V wide voltage DC supply, 12V POE power supply supported

HDD heating technique supported, operating temperature range -40℃- + 80℃

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

- 2 -

2. Introduction to Mainframe

Front USB2.0

Electric

lock

SIM card and

SD card

Video output

interface

Status indicator

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

- 3 -

AL200-NVR Interface Diagram

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

- 4 -

3.Introduction to Main Keys of Your Remote Control

When the recorder is set with a password, press the Login key to input your password.

As the system is not provided with recover and reset features, always keep your

password in mind.

INFO

Check information

Quad View key

Number key 1, 2, 3, 4

On the monitoring interface, used to switch between quad view and single view; press

the Quad View key to display 4 screens. You can press number 1/2/3/4 to display

channel 1, channel 2, channel 3 and channel respectively.

RETURN

Return to the previous menu, and finally exit from the setup menu to the monitoring

interface

PAUSE/STEP key

Used to pause playing or play images at a single step. Press the key again to recover

normal play speed

FRAME

Press this key to play a video in a frame rate

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

- 5 -

PLAY

Press this key to start playing (search the video file to be played and select, then press

the key to play it)

FWD

Forward key in four grades: 2X,4X,8X,16X

REW

Rewind key in four grades: 2X,4X,8X,16X

NEXT key

Page down or roll to the next file

PREV key

Page up or roll to the previous file

PTZ key

Auto, preset, call, zoom +, zoom -, focus +, focus -, aperture +, aperture -, PTZ,

PRESET, RECALL, BRUSH

F1, F2, F3

F1 is a key to start functional test

Shenzhen Alersec Technology Co.,Ltd Operating Instruction for Vehicle Mobile DVR

- 6 -

二. Device and Installation

1. Installation

1.1: Open the protective cover

Turn the electric lock located on the front panel anti-clockwise to unlock it and open the protective cover.

1.2: Prepare the HDD

Insert the prepared HDD into the HDD box and fix it.

1.3: Insert the HDD

As indicated on the panel, turn the

electric lock anti-clockwise to unlock it

and open the protective cover

Open the protective cover

Insert 2.5" HDD into its box

Fix it with 4 screws

Tabla de contenidos

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario