Shengmilo MX03 Manual de usuario
1
2
OWNER'S MANUAL UPDATES
The following information updates your ebike's Owner's Manual. Please read it carefully. Keep your owner's manual and any
other documents that came with your ebike. All content in this update and the manual is subject to change or withdrawal
without notice. Visit www.shengmilo-bikes.com to view and download the latest version. Shengmilo makes every effort to
ensure the accuracy of its documentation and assumes no responsibility or liability if any errors or inaccuracies appear
within.
WARNING: Incorrect assembly, maintenance, or use of your ebike can cause component or performance failure, loss of control, serious injury,
or death. Even if you're an experienced bike rider, you must read and understand the entire manual and any documentation provided for
subcomponents or accessories before riding. If you are not sure you have the experience, skills, and tools to correctly perform all assembly
steps in the manual and the assembly video at www.shengmilo-bikes.com, consult a local, certified, reputable bike mechanic.
WARNING: To reduce the risk of injury, close supervision is necessary when the product is used near children.
Guard against rust, water damage, and corrosion
Like any vehicle used outdoors, your ebike needs care to ensure it isn't damaged by the elements. Follow these steps for a long, healthy life for your
ebike:
3
•Store under shelter and in an upright position; avoid leaving the bike in the rain or exposed to corrosive substances such as water, salt, or de-icing
substances. If exposed to rain, dry your bike afterward, and apply an anti-rust treatment to the chain and other unpainted steel surfaces.
•To clean your ebike, turn the bike and battery off and wipe the frame with a clean, damp cloth. If needed, apply a mild, non-corrosive detergent
mixture to the damp cloth and wipe the frame. Dry by wiping with a clean, dry cloth. Never use high-pressure water on your bike. Wipe down your
bike frequently and wipe or spray all unpainted mechanical parts with anti-rust treatment.
•If painted metal parts become scratched or chipped, use touch up paint or nail polish to prevent rust.
•Never immerse or submerge the bike or any components in water or liquid, which can damage the electrical system.
•Avoid riding on the beach, in coastal areas with high-salinity fog, or on surfaces treated with salt or de-icing compounds. Doing so exposes your
bike to salt or other substances that are very corrosive. Corrosion of electrical components can lead to permanent, irreversible damage that can
cause battery failure, electrical system failure, or electrical fire. Damage from corrosion is not covered under warranty.
WARNING：Damage to your ebike's electrical system caused in any manner, including water intrusion, can lead to
battery failure, electrical system malfunction, or electrical fire and consequent property damage, injury, or death. Follow all
recommendations to minimize chance of water damage. If you have any questions, contact Shengmilo Product Support.
4
WARNING: Using a damaged battery or charger can create additional bike damage or a fire hazard. Stop using your battery and
charger and contact Shengmilo immediately if any of the following occur: (1) Your charger's flexible power cord or output cable or any
of the electrical cables on your bike is frayed, has broken insulation, or any other signs of damage, (2) Your battery or charger is physically damaged,
non-functional, or performing abnormally, (3) Your battery or charger experienced a significant impact from a fall or crash, with or without obvious
signs of damage, or (4) Your charger becomes too hot to touch (it's designed to get warm with normal use), makes a funny smell, or shows other signs
of overheating. Store any damaged battery or charger in a safe location and, as soon as possible, recycle or otherwise dispose of it according to local
rules. Contact Shengmilo if you have any questions or to purchase a compatible replacement battery or charger.
How the electrical system works
This ebike is equipped with two ways for a rider to use power assistance from the motor to propel the bike forward: a pedal assist system (PAS) and a
half twist throttle.
HOW PEDAL ASSIST WORKS
The rider can engage the pedal assist system (PAS)while pedaling, and it will call up assistance from the motor to help propel the bike forward.
Pedal assist uses a cadence sensor built into the drivetrain of the bike. The sensor detects when the rider revolves the pedals and signals the electric
motor to provide the level of pedal assistance that has been selected.
HOW THE THROTTLE WORKS
The throttle is located on the right side of the handlebar. The rider can use it with a twist of the throttle grip to propel the bike forward without pedaling.
5
To engage the throttle while riding, slowly and carefully rotate it toward yourself. The more you twist, the more powerfully the throttle will propel the
bike forward. Once you release the throttle or apply the brakes, the throttle will no longer propel the bike forward. Always keep one hand on the brake
lever and be prepared to squeeze the lever to disengage the throttle if needed, or turn off the bike to prevent accidentally engaging the throttle.
Ebikes from Shengmilo are equipped with an on/off switch for the throttle. These switches can be set to “off ” even while the bike electrical system is
on in order to prevent use of the throttle. You should not use your throttle if regulations where you ride prohibit throttle use on ebikes. It is your
responsibility to research and follow local ebike regulations and all other traffic law.
Do not touch the brake rotor
WARNING: Touching the brake rotor, which has sharp edges and can get very hot while you're riding, can
cause serious injury, slicing damage, or burns. The brake rotor heats up from normal friction when the brake pads
press against the brake rotor to slow or stop the bike. Touching the brake rotor with bare skin can also transfer natural oils to
the rotor, which can decrease braking performance. Do not touch the brake rotor, especially when it's in motion or after
you've been riding your bike. Touch the brake rotor only for necessary maintenance when it is cool, not moving, and while
you are wearing gloves or using other appropriate protective equipment.
Warranty update
Notwithstanding the warranty information in the manual, the warranty period begins at the date of receipt of this ebike by the customer. The latest
version of the warranty terms is available at www.shengmilo-bikes.com.
6
Welcome
Thank you for purchasing the Shengmilo MX03 from Shengmilo® Global Official Store.
We take pride in bringing you a quality product that will offer years of enjoyment. Please read and understand this manual fully before assembling and riding
your bike.
If you have questions after reading this manual, please refer to the Shengmilo Support, contact us by email.
We are here to help!
Shengmilo Support: www.shengmilo-bikes.com
Email: support@shengmilo-bikes.com
Thanks for riding Shengmilo E-bikes!
7
Using This Manual
This manual contains details of the product, its equipment, and information on operation, maintenance, and other helpful tips for owners. Read it carefully and familiarize
yourself with the ebike before using it to ensure safe use and prevent accidents. This manual contains many warnings and cautions concerning the safe operation and
consequences if proper setup, operation, and maintenance are not performed. All information in this manual should be carefully reviewed and if you have any questions
you should contact Shengmilo immediately.
The notes, warnings, and cautions contained within the manual and marked by the triangular Caution
Symbol at the right of this page should be given special care. Users should also pay special attention to
information marked in this manual beginning with NOTICE.
Keep this manual, along with any other documents that were included with your bike, for future reference, however all content in this manual is subject to change or
withdrawal without notice. Visit www.shengmilo-bikes.com to view and download the latest version. Shengmilo makes every effort to ensure the accuracy of its
documentation and assumes no responsibility or liability if any errors or inaccuracies appear within.
Assembly and first adjustment of your bike from Shengmilo requires special tools and skills and it is recommended that this should be done by a certified, reputable bike
mechanic if possible.
Because it is impossible to anticipate every situation or condition that can occur while riding, this manual makes no representations about the safe use of bikes under all
conditions. There are risks associated with the use of any bike that cannot be predicted or avoided and are the sole responsibility of the rider.
8
Table of Contents
Using This Manual ....................................................................................................................................................................................................... 7
General Info ..................................................................................................................................................................................................................9
Assembly Instructions .................................................................................................................................................................................................13
Battery Charging .........................................................................................................................................................................................................24
Operation .................................................................................................................................................................................................................... 30
Maintenance................................................................................................................................................................................................................42
Troubleshooting ..........................................................................................................................................................................................................47
Warnings and Safety...................................................................................................................................................................................................49
Limited Warranty ........................................................................................................................................................................................................54
Link to Assembly Video and Online Resources ......................................................................................................................................................... 60
9
General Info
Assembly and Fit
Correct assembly and fit are essential elements of ensuring your bicycling safety, performance, and comfort. Even if you have the experience, skill, and tools to complete
these essential steps before your first ride, Shengmilo recommends having a certified；reputable bike mechanic check your work.
NOTICE: If you do not have the experience, skill, and tools to complete assembly and fit, Shengmilo highly recommends having a certified, reputable bike mechanic
complete these procedures as well as any future adjustments or tuning.
NOTICE: A critical aspect of assembling your bike by Shengmilo is securing the front wheel and checking the tightness of the rear wheel axle nuts. All bikes by
Shengmilo use a quick release front wheel mounting mechanism and the rear wheel is bolted on. These mechanisms may become loose or unsecured during shipment or
over time. The torque and security of all wheel mounting hardware should be inspected upon arrival and on a regular basis. Both wheels need to be properly secured
before operating your bike.
Mandatory Equipment and Use Locations
Before all rides, ensure you have all required and recommended safety equipment and are following all laws pertaining to using an electric bike in your region. For
example, these laws may specify the need for mandatory equipment, use of hand signals, and where you can ride.
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the safety of your ebike, void your warranty and, in some cases,
cause your ebike to not conform with laws pertaining to your bike.
The replacement of original components or installation of third-party accessories or accessories from Shengmilo not explicitly recommended for your
bike model is at your own risk. Using aftermarket accessories or components that have not been tested by Shengmilo for safety and compatibility may
void your warranty, create an unsafe riding condition, damage to property or your bike by Shengmilo, or result in serious injury or death.
10
Safety Check Before Each Ride
Always check the condition of your bike before you ride in addition to having regular maintenance performed. If you are unsure of how to conduct a complete check of
the condition of your bike before every ride, you should consult a certified, reputable bike mechanic for assistance. See the Pre-Ride Safety Checklist for more
information.
Electrical System
The electrical system on your ebike offers various levels of power assistance and lighting for different operating conditions and user preferences. It is critical that you
familiarize yourself with all aspects of your ebike's electrical system and check to see that it is working correctly before every ride. The front and rear brake levers contain
safety power cutoff switches, which disable the hub motor's assistance when applied, and both levers should be checked for correct operation. The throttle should provide
smooth acceleration when gradually applied. If the throttle, brake lever cutoff switches, pedal assistance, or lighting are functioning abnormally, intermittently, or not
working, please discontinue using your ebike immediately and contact the Shengmilo Product Support team for assistance.
Brakes
Ensure brakes are working correctly, all braking system components are free from damage, and properly secured. When you fully squeeze the brake levers, ensure neither
the front nor rear brake levers touch the handlebar. Take your bike to a certified, reputable bike mechanic to have the brakes repaired if you find a problem.
Tires and Wheels
Your wheels should always spin straight and must be repaired or replaced if they wobble side to side or up and down when spinning. If your wheels become untrue or
spokes loosen, which can happen with normal use, we recommend that a certified, reputable bike mechanic performs all wheel tuning and truing operations on your bike
from Shengmilo. Do not attempt to true wheels or tighten spokes unless you have adequate knowledge, tools, and experience. Ensure the tires and inner tubes are in good
working condition without any visual damage and have the correct amount of air pressure. Always replace tires and inner tubes with punctures, cuts, or damage before
you ride. Tires without the correct amount of air pressure can reduce performance, increase tire and component wear, and make riding your bike unsafe.
Tabla de contenidos
Otros manuales de Bicicleta de Shengmilo
