2. Main Interface:
Main Interface Composition as below:
Speed/Flow Rate Display: In the flow rate mode, display the current flow rate, the
motor speed is displayed at the C frame. In the rotating speed mode, display the
current set up speed, flow rate is displayed at the C frame. Click A to amend the
flow rate or speed. When fixed time and volume function turn on, A is forbidden,
not allowed to amend the flow rate or speed.
Real-time Dynamic Display Display the current running state.
Real-time Parameter Display Display the current running state and set up
parameter. When the fixed volume measurement turn on, display the fixed volume
measurement parameter; when the fixed time and volume function turn on, display
the fixed time and volume parameter. When these two functions turn off, display the
parameter is all 0.
Set Parameter Display Display the fixed volume measurement, fixed time and
volume state information, the model of pump head and tube size.
Date and Time Display Display the current data and time, you can change it in the
system setting. When it display an alarm clock on the right side, it means the timer
