shelta AG5A Manual de usuario
Canopy Change
AG5a, AG5c,AG25, AG25R, AG35, AG45, AD45, AG55, AG65
Step 1
Remove all the screws from the Rib ends (7)
Step 2
Raise the umbrella slightly so you can remove the support bar canopy
screw –depending on the model, this step may require a stumpy Phillips head.
Rip the Velcro apart all the way to the protector pad
Step 3
Remove the finial by unscrewing it in a counter clockwise direction.
You can use a step ladder for this step
Step 4
Lift the canopy up and over the structure.
You can use a step ladder for this step
Step 5
Place the new canopy over the structure and align the hole
and the support arm Velcro under the protective pad
Step 6
Replace the finial by screwing it in a clockwise direction.
You can use a step ladder for this step
Step 7
Replace the screw into the support arm
Join the Velcro all the way to under the protector pad
Step 8
Replace all the screws in the Rib ends (7)
Then wind up the canopy slowly to allow proper unfolding
Otros manuales para AG5A
1
Este manual sirve para los siguientes modelos
8
Otros manuales de Muebles de patio de shelta
shelta
shelta AG35 Manual de usuario
shelta
shelta Fairlight Manual de usuario
shelta
shelta Palazzo Manual de usuario
shelta
shelta AG25 Guía de configuración rápida
shelta
shelta AD45 Manual de usuario
shelta
shelta AG25R Manual de usuario
shelta
shelta AKZ CANTILEVER UMBRELLA Manual de usuario
shelta
shelta AG5A Manual de usuario
shelta
shelta SAVANNAH Guía de configuración rápida
shelta
shelta ASTA Manual de usuario
