Sharp EO-187-BK Manual de usuario
EO-187-BK
ELECTRIC OVEN
EO-187-ST
EO-187T-BK
EO-187T-ST
EO-B18V-BK
Safety Precautions
Product Components Specifications &
Operating Instructions
Cleaning and Maintenance
Troubleshooting
Page
3-7
13
14
CONTENTS
&
-2-
8
9-12
Please follow this instruction manual strictly to operate this unit correctly.
To avoid any personal injury and property loss, please comply with the following
safety notices. Accidents may occur if the user does not comply with the
BEFORE THE FIRST USE:
Remove and unpack all packing materials. Check that all parts and
components are complete and not damaged. If any part of the appliance
is found to be damaged, it must be brought to appointed SHARP service
center to be checked, repaired or replaced to prevent any hazards occurring.
Please do not dismantle or repair the appliance by yourself for safety
purposes.
Clean the unit according to the “Cleaning and Maintenance” section
before using.
safety notices and operates the unit incorrectly.
SAFETY PRECAUTIONS
•
•
severe injuries
-3-
This appliance is only applicable for household usage. Please
If the power cord is damaged, the appliance must be brought
pair or replacement to
•Do not damage or alter the power cord arbitrarily. It should not be
twisted, extended, bundled up or placed near hot places. Do not place
heavy objects on the power cord or place the cord in the gap between
objects.
•Do not let the power cord hang over the edge of table or countertop.
Do not place the power cord on hot surfaces.
•If the power cord or power plug is damaged or failed to function normally,
(e.g. being expanded, deformed, changed in color, part of the power cord
is hotter than usual, power cord is loosened in the socket, or power is on
and off from time to time), please stop using it. Send it to a SHARP service
center for repair services.
Use a wall grounded socket individually (>10A, AC 220-240V～
50/60Hz); please ensure that the output voltage of the grounded
socket matches the appliance.
•Using socket with low rate current or sharing the socket with other
appliances may cause partial overheating and may lead to fire hazard
or electrical shock.
•A voltage stabilizer can be used to avoid damages.
•Please ensure the power plug is fully secured into the socket before
When the appliance is not in use or undergoing maintenance, please
turn off the power supply and remove the plug from socket.
•Please hold onto the plug firmly when removing it from power socket
and prohibit pulling the power cord.
•Do not touch the power plug with wet hands to avoid electrical shock.
•If there is dust or dirt on the power plug, please wipe them away with a dry
cloth, otherwise it may lead to fire hazard. Never use a wet cloth or water
switching on the power.
to clean the power plug.
misuse the appliance for purposes other than its actual function.
operate the unit according to the operation manual, and do not
prevent any hazards occurring.
to appointed SHARP service center for re
-4-
Do not disassemble or repair the appliance or replace any components
•For repair services, please contact SHARP service center to avoid
electric shock, short circuit, fire hazard, etc.
If the appliance happens to be dropped or is broken, stop using it and
please
send it to the SHARP service center for repair services
.
•Otherwise, it may result in electric shock or even fire hazard.
•If the appliance is dropped into the water,do not reach for it. Switch off
Keep the appliance away from water and fire, and do not use the
•Do not use the appliance on inflammable objects like paper, cloth, carpet
or plastic bags.
•Do not use the appliance on uneven places.
•When using the appliance, do not place appliance near the wall or furni-
The appliance must not be immersed into the water.
•The appliance will be damaged, and it may cause short circuit or
If the oven is positioned close to a wall, the wall will have burn or stain
•Please ensure that hanging fabrics are not placed nearby or in ????contact
Do not put anything between the bottom of oven and the surface
•
Any object so placed could be burned or deformed.
Do not put anything on the oven during operation.
•The heat could cause deformation, cracking, etc.
by yourself. Only components supplied by SHARP can be used.
all power sources, drain the water away then only retrieve the appliance
to be sent for repairs.
ture or under the sunlight, or places where it may be splashed by oil.
electric shock.
marks.
with the oven body.
it is set on.
applianceon aninclinedor unstableplatform,toavoidfromany
accidentsordamages.
-5-
Please operate the appliance correctly according to the operating
instructions.
•Avoid fire hazard or electric shock caused by improper operation, such
Any bottled or canned food must not be heated directly.
•The bottle or tin can would explode and cause severe damages and
injuries.
Do not place foil wrapped food into the oven.
•Remove all protective wrapping prior to placing food in the oven.
During operation, do not move the appliance and do not get too close
•Please keep face and hands away from the appliance to avoid scalding.
•The temperature of the accessible surface may be high when the
•Immediately after using the oven, please be careful as the metal parts
would be extremely hot.
Always use the tray handle when inserting or removing the tray.
•Touching the hot tray/rack will cause severe burns.
When the appliance is hot, do not applyanywatertotheglasswindow.
•It may cause the glass to break and may result in personal injury.
Do not start cleaning until the appliance is cooled down.
•Avoid touching any hot part of the appliance or it may cause scalds.
Clean the appliance each time after using.
•Do not use steel scrubs, abrasive cleansers or corrosive liquid (e.g.
Gas or Acetone) to clean the appliance.
Be sure to switch off the appliance after operating to ensure safety.
•Ensure that the power switch is off in order to avoid any unforeseen
accidents.
as liquid overflowing to the connector between power cord and cooker.
to the appliance or touch any hot part of the appliance.
and glass window of the door
Please turn off the power supply before remove the baking tray.
appliance is operating.
-6-
The appliance is not intended to be operated by means of an external
timer or separate remote control system.
Children should be supervised to ensure that they do not play with
The surface is liable to get hot during use.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and/or knowledge, unless they have been given supervision
or instruction in the safe use of the appliance and have understood the
potential risk.
-7-
the appliance.
1. Door handle
2. Main body
3. Temperature knob
4. Function knob
5. Timer knob
Crumb tray
Baking rack
8. Baking tray
Rating Voltage 220-240V
Rating Frequency 50/60Hz
Rating Power 1300W
Capacity 18L
Product Dimension 432 x 383 x 231mm
6.
7.
8
67
Accessories
Crumb tray (x1)
Baking rack (x1)
Baking tray (x1)
9
9. Tray handle
10. Indicator light
(W x D H)
x
Tray handle (x1)
PRODUCT COMPONENTS
PRODUCT SPECIFICATIONS
4
5
10
2
1
3
-8-
~
Before using the appliance, in order to
clean the components properly.
Before operating the appliance, ensure that there is at least 10cm distance of
space on the front and both sides of the oven for adequate air circulation. Please
ensure the crumb tray is properly installed before using.
For the first time of usage, set the temperature knob to the MAX, with function
setting on , and the timer to 15 minutes. This will help to burn off any oil
which are still remained in the oven.
NOTE: The oven may emit smoke during this process. This is normal for a new
oven and will not last for more than 10-15 minutes.
OPERATING INSTRUCTIONS
please refer to “Cleaning and Maintenance”
-9-
Function Settings
This electric oven offers 3 different functions for versatile cooking all in one
appliance.
The lower heating elements will be heating up during this
function.
The upper heating element will be heating up during this
function.
Both the upper and lower heating elements will be heating up
during this function.
CONTROL SETTINGS
-10-
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Horno de Sharp
Sharp
Sharp K-61P27BNM Manual de usuario
Sharp
Sharp SWA2450GS Manual de usuario
Sharp
Sharp SMD2477AHC Manual de usuario
Sharp
Sharp AX-1250R Manual de usuario
Sharp
Sharp STR3065HS Manual de usuario
Sharp
Sharp R-55TSF Manual de usuario
Sharp
Sharp SWB3085HS Manual de usuario
Sharp
Sharp Carousel R-90GC Manual de usuario
Sharp
Sharp Carousel R-55TS Manual de usuario
Sharp
Sharp SuperSteam+ SSC2489DS Manual de usuario
Sharp
Sharp AX-1600R Manual de usuario
Sharp
Sharp STR3065HS Instrucciones de montaje
Sharp
Sharp SuperSteam Plus SSC3088AS Manual de usuario
Sharp
Sharp Microwave Drawer SMD2489ES Manual de usuario
Sharp
Sharp Home Appliances K-62D19IM0-EU Manual de usuario
Sharp
Sharp SWA2450GS Manual de usuario
Sharp
Sharp SuperSteam+ SSC3088A Manual de usuario
Sharp
Sharp AX-700S - Superheated Steam Oven Manual de usuario
Sharp
Sharp KA-73S56BSS-EU Manual de usuario
Sharp
Sharp K-61V28BM1-EU Manual de usuario
