Sharp AR-M236 Manual de usuario

AR-M236

AR-M237

AR-M276

AR-M277

MODEL

DIGITAL MULTIFUNCTIONAL

SYSTEM

SOFTWARE SETUP GUIDE

Page

• INTRODUCTION

• SOFTWARE FOR THE SHARP

AR-M230/M270 SERIES

• BEFORE INSTALLATION

• INSTALLING THE SOFTWARE

• CONNECTING TO A COMPUTER

• CONFIGURING THE PRINTER

DRIVER

• HOW TO USE THE ONLINE

MANUAL

• TROUBLESHOOTING

Back cover

!!install_ar230270.book 1 ページ２００４年２月１９日　木曜日　午後１時１７分

INTRODUCTION

This manual explains how to install and configure the software that is required for the printer function

of the machine. The procedure for viewing the online manual is also explained.

Trademark acknowledgments

•Microsoft

®Windows®operating system is a trademark or copyright of Microsoft Corporation in the

U.S.A. and other countries.

•Windows

®95, Windows®98, Windows®Me, Windows NT®4.0, Windows®2000, and Windows®

XP are trademarks or copyrights of Microsoft Corporation in the U.S.A. and other countries.

the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.

• IBM and PC/AT are trademarks of International Business Machines Corporation.

• All other trademarks and copyrights are the property of their respective owners.

SOFTWARE LICENSE

The SOFTWARE LICENSE will appear when you install the software from the CD-ROM. By using all

or any portion of the software on the CD-ROM or in the machine, you are agreeing to be bound by the

terms of the SOFTWARE LICENSE.

• The screen images in this manual are mainly for Windows®XP. With other versions of

Windows®, some screen images may be different from those in this manual.

• The explanations in this manual are based on the North American version of the software.

Versions for other countries and regions may vary slightly from the North American version.

• Where "AR-XXXX" appears in this manual, please substitute the name of your model for "XXXX".

For the name of your model, see "PART NAMES AND FUNCTIONS" in the operation manual for

copier.

• This manual refers to the "SHARP Digital Multifunctional System AR-M230/M270 Series

Software CD-ROM" simply as "CD-ROM".

The display screens, messages, and key names shown in the manual may differ from those on the actual

machine due to product improvements and modifications.

Note

!!install_ar230270.book 2 ページ２００４年２月１９日　木曜日　午後１時１７分

CONTENTS

SOFTWARE FOR THE SHARP AR-M230/M270 SERIES.................................................... 2

BEFORE INSTALLATION ..................................................................................................... 2

●HARDWARE AND SOFTWARE REQUIREMENTS ................................................................... 2

●INSTALLATION ENVIRONMENT AND INSTALLATION PROCEDURE.................................... 2

INSTALLING THE SOFTWARE ............................................................................................ 3

●STANDARD INSTALLATION (USB only) ................................................................................... 3

●CUSTOM INSTALLATION .......................................................................................................... 5

●INSTALLING THE PC-FAX DRIVER ........................................................................................ 11

CONNECTING TO A COMPUTER ...................................................................................... 12

●CONNECTING A USB CABLE ................................................................................................. 12

●CONNECTING A PARALLEL CABLE ...................................................................................... 12

CONFIGURING THE PRINTER DRIVER ............................................................................ 13

HOW TO USE THE ONLINE MANUAL............................................................................... 14

TROUBLESHOOTING......................................................................................................... 15

!!install_ar230270.book 1 ページ２００４年２月１９日　木曜日　午後１時１７分

SOFTWARE FOR THE SHARP

AR-M230/M270 SERIES

The CD-ROM that accompanies the machine contains the following software:

•Printer driver

The printer driver enables you to use the printer function of the machine.

•PC-FAX driver

The PC-FAX driver lets you easily send faxes from your computer through the machine to another

fax machine (when the facsimile expansion kit is installed).

* To use the PC-FAX driver, Internet Explorer 4.0 or later must be installed in your computer.

•Acrobat Reader 5.0

Software that allows you to view the online printer manual on your computer.

BEFORE INSTALLATION

HARDWARE AND SOFTWARE REQUIREMENTS

Check the following hardware and software requirements before installing the software.

*1 Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or

Windows XP Home Edition preinstalled models equipped with a USB interface as standard.

*2 If you are installing the PC-FAX driver, a system file must be updated before the driver can be installed. For

more information, click the "Display Readme" button in the Software Selection window of the installer. (p. 11)

*3 Administrator's rights are required to install the software using the installer.

INSTALLATION ENVIRONMENT AND INSTALLATION

PROCEDURE

Follow the appropriate installation procedure for your operating system and type of cable as indicated below.

* If the machine is connected by a USB cable, it is recommended that you use the standard installation.

Computer type IBM PC/AT or compatible computer equipped with a USB 2.0/1.1*1or

bi-directional parallel interface (IEEE 1284)

Operating system Windows 95*2, Windows 98, Windows Me,

Windows NT Workstation 4.0 (Service Pack 5 or later)*3,

Windows 2000 Professional*3, Windows XP Professional*3,

Windows XP Home Edition*3

Other hardware requirements An environment that allows any of the above operating systems to fully operate

Operating system Cable Procedure to follow

Windows 98/Me/2000/XP USB* STANDARD INSTALLATION (USB only) (p. 3)

Windows XP USB*/Parallel Installation in Windows XP (USB/Parallel cable) (p. 5)

Windows 98/Me/2000 USB* Installation in Windows 98/Me/2000 (USB cable) (p. 7)

Windows 95/98/Me/NT

4.0/2000

Parallel Installation in Windows 95/98/Me/NT 4.0/2000 (Parallel cable) (p. 9)

!!install_ar230270.book 2 ページ２００４年２月１９日　木曜日　午後１時１７分

INSTALLING THE SOFTWARE

STANDARD INSTALLATION (USB only)

The procedure for a standard installation of the software is explained below. If the machine is

connected by a USB cable, it is recommended that you use the standard installation.

1The USB cable must not be connected

to the machine. Make sure that the

cable is not connected before

proceeding.

If the cable is connected, a Plug and Play

window will appear. If this happens, click the

"Cancel" button to close the window and

disconnect the cable.

2Insert the CD-ROM into your computer's

CD-ROM drive.

3Click the "start" button, click "My

Computer" ( ), and then double-click

the CD-ROM icon ( ).

In Windows 98/Me/2000, double-click "My

Computer" and then double-click the

CD-ROM icon.

4Double-click the "Setup" icon ( ).

5The "SOFTWARE LICENSE" window will

appear. Make sure that you understand

the contents of the license agreement,

and then click the "Yes" button.

Read the message in the "Welcome"

window and then click the "Next" button.

7Click the "Standard" button.

Follow the on-screen instructions.

8When the finish screen appears, click

the "Close" button.

A message will appear instructing you to

connect the machine to your computer.

Click the "OK" button.

If an error message appears, follow the on-screen instructions to solve the problem. After the

problem is solved, the installation procedure will continue. Depending on the problem, you may

have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the

beginning after solving the problem.

The standard installation can only be used when the machine is connected by a USB cable. If the

machine is connected by a parallel cable, use the custom installation procedure (p. 5).

Note

The cable will be connected in step 9.

If the language selection screen

appears after you double click the

"Setup" icon, select the language that

you wish to use and click the "Next"

button. (Normally the correct language

is selected automatically.)

Note

If you are running Windows 2000/XP

and a warning message appears

regarding the Windows logo test or

digital signature, be sure to click

"Continue Anyway" or "Yes".

After the installation, a message

prompting you to restart your computer

may appear. In this case, click the

"Yes" button to restart your computer.

Caution

Note

!!install_ar230270.book 3 ページ２００４年２月１９日　木曜日　午後１時１７分

INSTALLING THE SOFTWARE

9Make sure that the power of the machine

is turned on, and then connect the USB

cable. (p. 12)

Windows will detect the machine and the

Plug and Play screen will appear.

Begin installation of the printer driver.

"SHARP AR-XXXX" will appear in the "Found

New Hardware Wizard" dialog box. Select

"Install the software automatically

(Recommended)" and click the "Next" button.

Follow the on-screen instructions.

This completes the installation of the

software.

After installation, see "CONFIGURING THE

PRINTER DRIVER" (p. 13) to check the printer

driver settings.

If you are running Windows 2000/XP

and a warning message appears

regarding the Windows logo test or

digital signature, be sure to click

"Continue Anyway" or "Yes".

Caution

!!install_ar230270.book 4 ページ２００４年２月１９日　木曜日　午後１時１７分

INSTALLING THE SOFTWARE

CUSTOM INSTALLATION

The procedure for a custom installation of the software is explained below. Use the custom installation

procedure when the machine is connected by a parallel cable, when the machine is used as a shared

printer on a network, or when installing the PC-FAX driver.

Installation in Windows XP (USB/Parallel cable)

1The USB or parallel cable must not be

connected to the machine. Make sure

that the cable is not connected before

proceeding.

If the cable is connected, a Plug and Play

window will appear. If this happens, click the

"Cancel" button to close the window and

disconnect the cable.

2Insert the CD-ROM into your computer's

CD-ROM drive.

3Click the "start" button, click "My

Computer" ( ), and then double-click

the CD-ROM icon ( ).

4Double-click the "Setup" icon ( ).

5The "SOFTWARE LICENSE" window will

appear. Make sure that you understand

the contents of the license agreement,

and then click the "Yes" button.

Read the message in the "Welcome"

window and then click the "Next" button.

7Click the "Custom" button.

8Click the "Printer Driver" button.

To view information on the software, click

the "Display Readme" button.

9Click the "Next" button.

The cable will be connected in step

15.

If the language selection screen

appears after you double click the

"Setup" icon, select the language that

you wish to use and click the "Next"

button. (Normally the correct language

is selected automatically.)

Note

!!install_ar230270.book 5 ページ２００４年２月１９日　木曜日　午後１時１７分

INSTALLING THE SOFTWARE

When you are asked how the printer is

connected, select "Connected to this

computer" and click the "Next" button.

A confirmation window appears. Check

the contents and then click the "Next"

button.

Click the "Next" button.

Begin installation of the printer driver.

When "The installation of the SHARP

software is complete" appears, click the

"OK" button.

Click the "Close" button.

A message will appear instructing you to

connect the machine to your computer.

Click the "OK" button.

Connect the interface cable to the

machine and your computer (p. 12).

•If you are using a USB cable, make

sure the machine's power is turned on

and then connect the cable.

•If you are using a parallel cable, turn off

the power of the machine and your

computer, connect the cable, turn on the

power of the machine, and then turn on

your computer.

Windows will detect the machine and the

Plug and Play screen will appear.

Begin installation of the printer driver.

"SHARP AR-XXXX" will appear in the "Found

New Hardware Wizard" dialog box. Select

"Install the software automatically

(Recommended)" and click the "Next" button.

Follow the on-screen instructions.

This completes the installation of the

software.

After installation, see "CONFIGURING THE

PRINTER DRIVER" (p. 13) to check the printer

driver settings.

If the following screen appears while the

files are being copied (the message may

appear more than once), click the

"Continue Anyway" button.

Caution

After the installation, a message

prompting you to restart your computer

may appear. In this case, click the

"Yes" button to restart your computer.

If a warning window appears

regarding the "Windows logo test", be

sure to click the "Continue Anyway"

button.

Note

Caution

!!install_ar230270.book 6 ページ２００４年２月１９日　木曜日　午後１時１７分

INSTALLING THE SOFTWARE

Installation in Windows 98/Me/2000 (USB cable)

1The USB cable must not be connected

to the machine. Make sure that the

cable is not connected before

proceeding.

If the cable is connected, a Plug and Play

window will appear. If this happens, click the

"Cancel" button to close the window and

disconnect the cable.

2Insert the CD-ROM into your computer's

CD-ROM drive.

3Double-click "My Computer" ( ), and

then double-click the CD-ROM icon ( ).

4Double-click the "Setup" icon ( ).

5The "SOFTWARE LICENSE" window will

appear. Make sure that you understand

the contents of the license agreement,

and then click the "Yes" button.

6Read the message in the "Welcome"

window and then click the "Next" button.

7Click the "Custom" button.

8Click the "Printer Driver" button.

To view information on the software, click

the "Display Readme" button.

9Click the "Next" button.

When you are asked how the printer is

connected, select "Connected to this

computer" and click the "Next" button.

The cable will be connected in step 16.

If the language selection screen

appears after you double click the

"Setup" icon, select the language that

you wish to use and click the "Next"

button. (Normally the correct language

is selected automatically.)

Note

!!install_ar230270.book 7 ページ２００４年２月１９日　木曜日　午後１時１７分

INSTALLING THE SOFTWARE

When the interface selection screen

appears, select "USB" and click the

"Next" button.

A confirmation window appears. Check

the contents and then click the "Next"

button.

Click the "Next" button.

In Windows 98/Me, click the "Yes" button.

Begin installation of the printer driver.

When "The installation of the SHARP

software is complete" appears, click the

"OK" button.

Click the "Close" button.

A message will appear instructing you to

connect the machine to your computer.

Click the "OK" button.

Make sure that the power of the machine

is turned on, and then connect the USB

cable. (p. 12)

Windows will detect the machine and the

Plug and Play screen will appear.

Follow the instructions in the Plug and

Play screen that appears in your version

of Windows to begin the installation.

This completes the installation of the

software.

After installation, see "CONFIGURING THE

PRINTER DRIVER" (p. 13) to check the printer

driver settings.

In Windows 2000, if the following

screen appears while the files are

being copied (the message may

appear more than once), click the

"Yes" button.

Caution

After the installation, a message

prompting you to restart your

computer may appear. In this case,

click the "Yes" button to restart your

computer.

Note

!!install_ar230270.book 8 ページ２００４年２月１９日　木曜日　午後１時１７分

Otros manuales para AR-M236

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Sharp

Sharp

Sharp MX-2314N Manual de usuario

Sharp

Sharp MX-B402 Manual de usuario

Sharp

Sharp FO-2080 Guía de configuración

Sharp

Sharp MX-M1204 Manual de usuario

Sharp

Sharp MX-2640N Manual de usuario

Sharp

Sharp MX-4140N Manual de usuario

Sharp

Sharp AL-1035-WH A Manual de usuario

Sharp

Sharp MX-7090N Manual de usuario

Sharp

Sharp MX-M1056 Manual de usuario

Sharp

Sharp MX-C312 Manual de usuario

Sharp

Sharp MX-2610N Manual de usuario

Sharp

Sharp AR-203E X Guía de configuración

Sharp

Sharp AR-M160 Manual de usuario

Sharp

Sharp MX-2300G Manual de usuario

Sharp

Sharp AL-1552 Manual de usuario

Sharp

Sharp MX-3610N Manual de usuario

Sharp

Sharp MX-C312 Manual de usuario

Sharp

Sharp Z-50 Manual de usuario

Sharp

Sharp MX-3050N Manual de usuario

Sharp

Sharp MX-B381 Manual de usuario

Sharp

Sharp MX-C250 Manual de usuario

Sharp

Sharp MX-M503N Manual de usuario

Sharp

Sharp AM-400 Manual de usuario

Sharp

Sharp AR-C172M Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario