SHAREBOT VIKING Manual de usuario

USER MANUAL

SHAREBOT

VIKING

VER. 1.0

28/11/2019

Index
Warning................................................................................................................................................3
Technical features............................................................................................................................3
Quick-start............................................................................................................................................4
Opening the package........................................................................................................................4
Before starting..................................................................................................................................4
Connection and configuration..........................................................................................................5
Connect to network..........................................................................................................................5
Use  our wireless network...............................................................................................................5
Installation and use of slicing software............................................................................................6
Using the printer interface...............................................................................................................6
Dashboard........................................................................................................................................6
Managing files.................................................................................................................................7
First print..........................................................................................................................................7
Calibrate the printing plate..............................................................................................................7
Fill the material tra .........................................................................................................................9
Start a printing operation...............................................................................................................10
After completion of the printing operation....................................................................................10
Remove and finish the object.........................................................................................................10
Cleaning.........................................................................................................................................11
Print details.........................................................................................................................................11
Instructions for aligning the print object........................................................................................11
Support...........................................................................................................................................12
Hollow objects...............................................................................................................................12
Potential problems and remedies........................................................................................................13
Resin escaping from the material tra ............................................................................................13
Object is not fixed to the building plate.........................................................................................13
The object base and support are attached to the printing plate but the object is on the bottom of 
the tank...........................................................................................................................................13
The resin is almost empt  during a printing process.....................................................................14
The resin leaves behind residue and impurities on the base of the tra .........................................14
Maintenance.......................................................................................................................................14
Proper use of the material tra .......................................................................................................14
Lubrications of the axes.................................................................................................................14
Ensure the correct ventilation........................................................................................................14
Firmware update............................................................................................................................15

Warning

As with all professional products, the Sharebot Viking, as well as its accessories and

materials must be handled carefully and professionally to ensure a secure working

environment and high durability of the device.

It should therefore be noted that any modification of the printer will void the warranty. The

same applies to any printer malfunction caused by improper use.

Do not open the front door of the D printer while the machine is running.

Never look directly into the projected light and wear protective goggles throughout the

printing operation.

The material trays are spare parts and are not covered by the warranty.

The projector LEDs have a set service life.

Regular maintenance will ensure consistent results over the entire period.

You can find further details on safe use of the printer on the technical data sheet and the

material producers manufacturer’s guidelines.

The accessories kit contains cutters and/or other sharp tools. Handle these with care.

The Sharebot Viking is a d printer based on CE-certified digital mask technology:

- 2006/42/CE

- 2014/20/UE

- 2011/65/UE

a high-precision professional tool.

Correct usage is a prerequisite for achieving optimum results.

Technical features

Printing range 192 x 120 x 200 mm

Accuracy XY 75 μm (+/- 25 μm)

Accuracy Z 50-100 μm, depending on the relevant material parameter

2K / UV projector 2560 x 1600 pixel

Wavelength 405 nm (+/- 5nm)

Printer dimensions 9x29x47 cm

Weight Approx. 21,5 kg

Working temperature 18°- 25° C

This data is subject to change for technical reasons.

Quick-start

Opening the package

You have just received your Sharebot Viking, containing the following:

- Sharebot Viking D printer

- Accessories box

- Power cable

- LAN cable

- USB Pendrive

- Manufacturing kit (spatula, nitrile gloves, resin filter, superlube pen, napkins)

- CE declaration

Before starting

First of all you need to prepare the workplace in which you intend to install the D printer.

Ensure that you have removed all obstacles from the area, that it is well-ventilated and that

it is not exposed to any direct natural light.

Ensure that all sides of the D printer are accessible and that there is sufficient space for

the manufacturing kit for finishing work on the printed object.

Ensure that the surface on which the D printer is positioned is level and stable.

To use the printer you need:

•Power socket with 100-240 VAC, 50-60 Hz.

•PC with Windows operating system for installing the slicing software with the

following requirements: i5 processor, at least 8GB RAM, Windows 7.

Options:

•a lan network or a Windows PC with an ethernet port to send files and manage the

D printer.

•a wireless network to send files and manage the D printer.

Open the package of your Sharebot Viking, carefully remove the manufacturing kit from

the packaging and place it on the work surface.

Remove the D printer from the packaging carefully and place it upright on the work

surface.

ATTENTION: Connect the blue US cable from US a to US b port (3, FIG.1).

Fig. 1

Connect the D printer: power line 1, the LAN cable 2, the USBa-USBb bridge , and the

USB HUB 4, on the back of Sharebot Viking ( Fig. 1b):

Fig.1b

Connection and configuration

The Sharebot Viking has an internal operating system using which you can manage the

printer.

Connect the machine with the LAN cable to your internal net (connect to a router not

directly to a PC).

Connect to network

Connect the LAN cable, and check the lcd interface, Settings/IP the Ip address assigned to

the d printer from the net. Use this IP to access to Sharebot from a browser connect to

the same net.

Use your wireless network

To configure the wireless connection it is necessary to initially connect the printer to the

network via the lan connection then use the function “Configuration” - “Network config” -

“Wireless” from your browser. Is possible to activate or deactivate the wifi connection.

Choose the wifi network by scanning the available networks, select the type of security

(WPA – open) and once the connection has been configured click "SAVE" and the next

confirmation.

Use the IP assigned to the printer to connect to the D printer through the same wifi

network.

On the frontal LCD of the machine will be displayed the assigned IP for the LAN and for

the Wireless connection.

Installation and use of slicing software

Instructions for installation, configuration and use of the slicing software can be found in

the Slicing Software Handbook (Pyramis).

Using the printer interface

After you have chosen the desired access mode you can access the printer’s management

interface.

There are two main pages, the “Dashboard” and the “File manager”.

Via the “Dashboard” you can display the status of the printer and suspend the operation.

In the “Filemanager/CWS file” section you can manage your object files, i.e. you can

upload the files that you want to build.

Dashboard

If you are connected to the printer via the network, the dashboard is the first page that is

displayed once you have started up the printer. The status of the printer is shown on this

page. By clicking the “Dashboard” symbol you can return from the sub-menu to the

Dashboard at anytime (Fig 5).

Fig. 5

In the “Overview” section is shown the status of the print operation. Here you can suspend

the print operation at any time by clicking “Stop” button.

Meaning of the fields shown:

Object Name of the running print job

Current layer Number of layers that have already been printed

Total layers Total numbers of layers

Time elapsed How long the printer has already been running

Total time Expected time for the entire print

Progress Percentage-based progress of the print operation

There are two other displays at the top right:

The led with the “Online” label is green when the printer is ready for operation. The led

with the “Printing” label is red when a print is currently running.

Attention: If the “Online” led is not green, contact the support service.

Managing files

If you select the “File manager” menu and the “CWS file” option you can access the file

manager. Here you can upload prepared print jobs, delete saved jobs and start a new

building process.

Fig. 6

Click on “Upload CWS” option to load a file into the printer.

When you select this option the upload window will open, then using the “Select file” option

you will be able to upload the desired object.

With the “Local”, “USB” and “All” options you can display the files in the internal printer

memory, the USB stick or both.

Each file can be printed via the “Print” button or deleted using “Delete” button.

In this page you can also find the “UTILITY” file:

-Plate down: will bring the printing plate down;

-Plate up: will bring the printing plate down and after up to the Z max length;

-Plate up 50mm: will move the printing plate up of 50mm from the actual position;

-Cleaning Cycle: will start the cleaning cycle, a full open projection that can be use to

polimerize the resin with eventual impurities on th bottom of the material tray.

First print

Attention: If you are working with liquid resin for the first time, please observe all

precautionary measures.

Calibrate the printing plate

Open the semi-transparent front door and remove the transport locks in the printing range

of the device.

Insert the material tray in the relevant position (Fig 2).

Fig.2

Insert the building plate in the appropriate position and lock the quick-release lock (Fig ).

Fig.

1-Relese the 4 screw on the printing plate side (Fig.4);

Fig. 4

2- From the printer interface, send the service file “plate down”, the printing plate will move

down;

-Tighten the 4 screw (Fig.4);

Fill the material tray

You can then fill the material tray with the corresponding resin. The resin may be filled to a

maximum of half the height of the edge of the tray. (as shown in image 7a).

Fig. 7

Otros manuales para VIKING

Tabla de contenidos

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario