7
T600
CD TRANSPORT
Dear customer
Thank you for buying cd transport. We would like
to take this opportunity to express our sincere
appreciation to you. We recommend you to read
this user's manual carefully before operating the
unit and keep it available for reference when
needed.
Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
Do not open this unit for repair or
modification by anyone other than a qualified
technician! This product has no user-
serviceable parts. Opening the unit and
modifying the internal circuitry can make
subsequent maintenance difficult or
impossible and affect performance and
sound quality.
For good ventilation, a minimum of 10cm
clearance shall be maintained at the back
and two sides and 20cm at the top of the
unit.
Allow no water dripping or splashing into the
unit. Place no object containing liquid on the
unit, e.g. Vase.
Do not cover any ventilation hole with
newspaper, cloth, curtain, etc. in case of
ventilation blocking.
Allow no exposed flame source on the unit,
e.g. burning candle.
The unit shall be connected to AC power
output socket with grounding protection.
If power plug and appliance coupler are used
as disconnecting device, the disconnecting
device shall be easily operable.
The waste battery must be treated
according to relevant local battery wasting
regulations.
9. Only applicable for safe use in the
area with elevation under 2000m.
See Fig. 1 for the sign. Fig. 1
CAUTION
RISK OF ELECTRIC SHOCKRISK OF ELECTRIC SHOCK
DO NOT OPENDO NOT OPEN
Caution: Risk of electric shock. DO NOT OPEN.
The sign with arrowed lightning inside an equilateral
triangle warns the user that the unit has high voltages
inside which can cause electric shock.
The sign with an exclamation mark inside an
equilateral triangle warns the user that the unit has
important operation and maintenance instructions.
Safety Precautions
Operation Precautions
1.
2.
3.
10. Only applicable for safe use under
non-tropical climate conditions.
See Fig. 2 for the sign. Fig. 2
1. Since the laser beam in this unit can damage
the eye, please do not open the enclosure.
Only a qualified technician should carry out
repairs.
2. This unit is classified as a Class 1 laser
product, and is identified as such on the
label located on the rear of the enclosure.
3. The laser components of this product can
generate laser radiation above the Class 1
limit.
Laser Warning
CLASS 1 LASER PRODUCT
1
Before Turning on
About Condensation
If a great temperature difference exists
between the unit interior and the
environment, humidity may condense on the
internal parts and the unit will not function
normally. If this happens, please disconnect
power and wait for one or two hours until the
temperature difference almost completely
disappears.
Moving the Unit
Please turn it off and disconnect it from
power socket. Then disconnect all cables
connecting with other system devices before
moving the unit.
Please check again the accuracy of all
connections cables.
