File: IN8900AMG.doc Directory: 8900 IN8900A Shadin Avionics
INSTALLATION MANUAL
AMS 2000, ALTITUDE ALERT SYSTEM
Rev M P/N 8900 Page 2-1
1.4
2. INSTALLATION PROCEDURE
2.1 Unpacking and Inspecting Equipment
Exercise extreme care when unpackaging the equipment. Make a visual
inspection of the unit for evidence of damage incurred during the shipment. If a
claim for damage is to be made, save the shipping containers to substantiate the
claim. The claim should be promptly filed with the transportation company. It
would be advisable to retain the container and packaging material after all
equipment has been removed, in the event that equipment storage or reshipment
should become necessary.
2.2 Mounting/Cooling Considerations
The conditions and tests required for TSO approval of this article are minimum
performance standards. It is the responsibility of those installing this article either
on or within a specific type or class of aircraft to determine that the aircraft
installation conditions are within the TSO standards. TSO articles must have
separate approval for installation in an aircraft. The article may be installed only if
performed under 14 CFR part 43 or the applicable airworthiness requirements.
The AMS 2000 should be installed in accordance with the standards established by
the customer’s installing agency and existing conditions, as to unit location and
type of installation. However, the following suggestions should be considered
before installing the AMS 2000. Close adherence to these suggestions will assure
a more satisfactory performance from the equipment. The installing agency will
supply and fabricate all external cables. The connectors required are supplied by
Shadin.
The AMS 2000 does not require a forced air cooling system.
2.3 Mechanical Installation
The AMS 2000 installation will conform to standards designated by the
customer’s installing agency, and existing conditions as to unit location and type
of installation. Attached drawing 4089-023 provides the installation information
for the AMS 2000 and components of the Altitude Alert System.
Refer to Install Kit IK8900 for parts list, descriptions, and attached drawings for
details.
