Environmental protection related signs
Common functions
Connect with PC
WIFI connection
Charge the Battery
34 5
Battery
Indicator light
Micro USB connect
Trouble Shooting
SAR
Declaration of hazardous substances in product
Attention
Barcode scanning
Device slot
Indicator light
（Picture 4：Single-slot Charging Dock）
（Picture 5：Battery Charger）
Connect your PDA with PC via USB cable or charging dock.
SEUIC's scan tool and customers' scan tool applications are
optional to scan the barcodes.
Frequently asked questions：
1.There is no light when scanning. Please check whether the
scan engine is closed, if closed, please go to the settings of
scan tool to turn it on.
2.One scanning results in two barcodes. Please check whether
the built-in scan tool and the third party application are running
simultaneously. If yes, close the built-in scan tool and set it to
“not Automatically open when power on”.
1. Click “settings” in main screen.
2. In “wireless and networks”, turn on Wi-Fi.
3. PDA will automatically search and list the available Wi-Fi.
4. Please select the one that you want, and then click it
to connect. If you select a secured network, you will need
to input password.
Note: If WLAN and mobile data are opened simultaneously,
WLAN take precedence. When WLAN is turned off, it will pop
up whether to use mobile data if it's available.
1. Do not soak USB port and tail plug of PDA into water.
2. Please close 2D scan engine when you are not using it,
don't keep it open for a long time.
3. Please do not directly look into the light beam of scan
engine during scanning in order to avoid possible injury.
4. Please first connect the USB cable or charging dock to
device, and then connect to the USB port in PC.
5. Please restarting the device after replacing the SIM or
SD card.
network mode.
2. PDA and PC cannot be connected, please check whether the
USB cable and the PDA are correctly connected.
3. If the device can't go to sleep mode, please check whether
network data exchange is working, or whether Flash and
NAND is in the operating processes of reading and writing data.
1. Unable to connect to the Internet after inserting SIM/UIM
card, please check whether your SIM/UIM card is out of service;
then check whether PDA supports the corresponding
LTE/WCDMA/EVDO/TD-SCDMA/GSM connection
When you insert 4G SIM card, please first select network
mode, and then PDA will be registered to the corresponding
4G network.
Note: when you do not use the network service, please close
the data service in time to extend the standby time and save
data.
Maximum SAR≤2.0W/kg,meet the requirements of national
standards:GB 21288-2007.
Toxic or hazardous substances or elements
Pb Hg CdCr6+PBB PBDE
Host ×○○○○○
Charger ×○○○○○
Battery ○○ ○ ○○○
Accessories ○○○○○○
Component
name
○：It indicates that the content of the toxic and hazardous
substances in all homogeneous materials in the parts is below
the requirements set by GB/T26572.
×：The content of the harmful substance in a homogeneous
material at least in the part exceeds the limit set by the
GB/T26572, and there is no mature alternative in the industry,
meeting EU RoHS environmental protection requirements.
Mainly used for materials and Technology Standard
Specification for electrical and electronic products, to make it
more conducive to human health and environmental protection.
The purpose of this standard is to eliminate the Pb, Hg, Cd,
Cr6+, PBB, PBDE, and a total of 6 substances in the electronic
products, and focus on the content of Pb cannot be more than
0.1%.
Placed the battery into the battery charger and connect it to
power supply. Red indicator means charging; green indicator
means it has been fully charged.
