
- 6 -
After installing the hard drive, use the original power adapter
or AC power cord to plug into the power port, use the data
cable to connect to the product's data port and the other
end to connect to the computer's USB port, turn on the
power switch after connecting, and you are ready to use.
Connect the terminal
device and plug and play.
Push the hard drive tray
into the enclosure and
snap on the front cover to
complete the installation.
Connecting Computer
Note: A brand new hard drive needs to be formatted,
otherwise the computer will not be able to read the drive.
For specific formatting steps, please refer to the "Hard Disk
Format Partition Operation" in the instructions.
Formatting the hard drive
otherwise it will not be able to exit properly, and forcing it
to exit may cause your data to be abnormal or lost.
(1) Uninstall from windows system:
First stop the hard drive reading and writing operations,
then click the small USB icon in the taskbar, select the disk
drive you want to uninstall, and finish the uninstallation.
(2) Uninstall from MAC system:
First stop the hard drive reading and writing, right-click the
desktop mobile device icon, and select "Push" in the
pop-up menu to safely remove it.
Note: When you need to uninstall the hard disk, please stop
reading and using the data files in the hard disk first,
Uninstalling the hard disk