1
We would like to thank you for choosing this prod-
uct. In order to obtain the best performance from
the automatism, the Sesamo Company recom-
mends that you carefully read and follow the
installation and use instructions provided in this
manual. The installation of this automatism must
be performed only by professionally qualified per-
sonnel to whom this manual is directed. Any
errors in the installation phase may be dangerous
for persons or objects. The packaging material
(wood, plastic, boxes, etc.) should not be dis-
posed of in the environment or left within the
reach of children, as it is potentially dangerous.
Each individual phase of the installation must be
performed in conformity with the current regula-
tions and, in any case, according to the dictates of
general good practices. Ensure, before beginning
the installation, that the product is integral and
has not been damaged during transport or from
improper storage. The product absolutely must
not be installed in environments with inflammable
gases, vapors or fumes. Record on each installa-
tion the identification data of the motorized door.
Verify that the electrical system upstream is cor-
rectly dimensioned and has all the suitable pro-
tections (differential switch and overload protec-
tion). When performing maintenance or repair,
use only the original spare parts. Do not tamper
with or alter for any reason the internal equipment
of the device and all the safeties provided in the
control unit.The manufacturer accepts no respon-
sibility in the event that the internal parts of the
automatism are altered or tampered with or if
safety devices are used in the system other than
those indicated by the manufacturer.The installer
of the automatism is obligated to provide the man-
ager of the automated entrance with the use man-
ual and all the information necessary for the cor-
rect use in automatic operation, manual operation
(also in the case of electric locking) and in emer-
gencies.
This device has been exclusively designed for the
control of automatisms for sliding doors of the
Millennium series produced by SESAMO. Any
other use will be considered contrary to the use
provided for by the manufacturer that, therefore,
cannot be held responsible.
Machines directive
According to directive 98/37/EC, the installer that
motorizes a door becomes the builder of the
automatic door machine and must:
•Prepare the Technical File with the documents
indicated in Annex V of the Machines Directive
and conserve it for at least 10 years.
•Write up the EC declaration of conformity
according to Annex II-A of the Machines
Directive and deliver a copy to the user.
•Affix the EC mark on the motorized door
according to point 1.7.3 of Annex I of the
Machines Directive.
Directive of conformity for machines
(Directive 98/37 EC, Annex II, part B)
Manufacturer: SESAMO S.r.l.
Address: Str. Gabannone 8/10 - 15030
Terruggia - AL
Declares that the product MILLENNIUM
ADVANCED LOGICS SELECTOR
•has been built to be incorporated in a machine
or to be assembled together with other
machinery in order to construct a machine
considered by the Directive 98/37 EC, as mod-
ified;
•thus it does not satisfy all points of the dispo-
sitions of this Directive as it is not yet assem-
bled with the other components.
•satisfies the conditions of the following other
EC Directives:
•89/336/EEC Electromagnetic Compatibility
and subsequent amendments
•73/23/EEC Low Voltage and subsequent
amendments
•and also declares that the machinery is not
allowed to be put into service until the machine
in which it will be incorporated or of which it will
become a component has been identified and
has been declared to satisfy the conditions of
the Directive 98/37 EC and the corresponding
national legislation.
Terruggia, 20/06/2003 Aldo Amerio
(Director)
