Serigstad MAXIFEEDER Manual de usuario
User manual
MAXIFEEDER & MAXIMAG
www.serigstad.no
We secure the forage quality and
automate heavy and time consuming
work.
Important for animal welfare, farmers
and the society.
17.12.2021
Rev.
Introduction.........................................................
Declaration of conformity..................................
Safety....................................................................
Dimensional sketch.............................................
Hazard areas........................................................
Installation............................................................
Technical data.....................................................
Connecting ..........................................................
Customization......................................................
Knife setup...........................................................
Dunctional description.......................................
Use MaxiMag.......................................................
Use MaxiFeeder...................................................
App.......................................................................
Maintenance........................................................
Troubleshooting..................................................
Spare parts...........................................................
Recycling...............................................................
Contact..................................................................
page 3
page 4
page 5-7
page 8
page 9-11
page 12-15
page 16
page 17-27
page 28-29
page 30-31
page 32-35
page 36-37
page 38-41
page 42-43
page 44-47
page 48
page 49-54
page 55
page 56
CONTENT INTRODUCTION
2
We appreciate the trust shown to our company purchasing Serigstad
MaxiFeeder/MaxiMag. The product is tested and built on a highly reliable
and known technology. The product fulll strict safety and quality
requirements.
Upon delivery our distributor will give you information about control,
maintenance and adjustments on the machine. The brief introduction is not
a compensation for the more detailed and necessary information given in
this instruction manual.
This instruction manual includes detailed safety instructions, use and
maintenance guidance, knowledge of functions and use of MaxiFeeder and
MaxiMag.
The system has one year warranty against fabrications- and material
defects. Serigstad Agri reserve the right to change the design without
obligation for previously delivered products.
We hope the product meets your expectations and needs!
Best regards
Dear customer!
Helge Njærheim
Research & Development Manager
Serigstad Agri AS
INTRODUCTION
3
DECLARATION OF CONFORMITY
4
THE SYSTEM CAN BE REMOTE-CONTROLLED AND START-UP AUTOMATICALLY SEVERAL
TIMES A DAY WITHOUT SUPERVISION!
PLACE ATTACHED WARNING SIGNS VISIBLE AT THE ENTRANCE OR IN NATURAL AREA BY
THE MACHINE.
THE SYSTEM IS TO BE SECURED WITH PHYICAL BARRIERS.
SEE OUR RECCOMANDATIONS AND LEARN PRECAUTIONS FOR STAYING IN DANGER AREAS.
WARNING!
SAFETY
5
DANGER
WARNING
Indicates an imminent dangerous situation which, if not avoided,
may result in serious injury or death.
Indicates a potential dangerous situation which, if not avoided, may
result in serious injury.
The label shows exposed danger areas when he covers are opened
or removed.
6
SAFETY
Use labeled points whe lifting the machine.
Use labeled poits for lifting the machine with forklift.
Keep clear to hanging load!
WARNING! - SAFETY FIRST
Figure 1: MaxiFeeder with machine labelling
Crushing hazard, op-
erating machine can
cause serious injury
or death
Read user manual
Keep distance to
running equipment
Serial number sign
Use included lifting lugs when
lifting the machine.
Lifting lugs are disassembled
before start-up.
Covers must be
closed during
operation
Never stay in danger
area durig operation
an start-up
7
SAFETY
Description Decals
Warning sign 996760 - red and yellow zone
Warning sign 7996765 - red and yellow zone
Warning sign 996766 - red zone
Warning sign 996763 - red zone
Warning sign 996746 - red and yellow zone
Danger sign 996745 - red zone
Be careful! Make sure you read and understand the
instruction manual before startup, maintenance and
adjustments are made.
Be careful! Keep distance to running equipment. Do
not stand in hazard area during startup or operation.
Objects may be thrown out of machine during
operation.
Be careful! All covers must be closed when machine
is running. Fingers and limbs can be damaged if they
are in contact with rotating parts.
Be careful! Crushing hazard that may cause serious
injury or death! Keep distance when machine is
running.
Be careful! High voltage. Disconnect power supply
before opening control cabinet.
WARNING! Disconnect power supply before entering
high risk area for maintenance or adjustments.
Standing in danger zone during operation may cause
serious injury or death.
8
DIMENSIONAL SKETCH
Figure 2: Dimensional sketch MaxiFeeder.
Figure 3: Dimensional sketch MaxiMag.
9
HAZARD AREAS
Hazard areas must be secured!
Before startup make sure nobody stays in
hazard areas.
Before entering hazard area for maintenance,
reparations or adjustments turn o and lock
main power switch.
Red zone | 0-850mm from machine
Represents hazard area which might cause
serious injury or death. It is important
to keep safe distance to the area during
operation.
Yellow zone | 400-1000mm from machine
Representerer potensielt fareområde under
Represents potentional hazard are during
operation.
Green zone | 1000mm from machine
Represents low risk of injuries during
operation.
Figure 4: MaxiFeeder with hazard
areas.
LOW RISK AREA
LOW RISK AREA
MEDIUM
RISK AREA
HIGH RISK
AREA
10
HAZARD AREAS
SAFETY FUNCTIONS
• Emergency stop switch is placed in front of the controlcabinet and eventually SafeGuard
control cabinet.
• Lockable main power switch is placed on the left side of the control cabinet.
• Light signals:
Green: the machine has power supply.
Yellow: during start-up and operation.
Red: emergency stop is activated or fault occur.
Acoustic signal before startup.
Figure 5: MaxiFeeder with SafeGuard fences.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Maquinaria agrícola de Serigstad
Manuales populares de Maquinaria agrícola de otras marcas
GSi
GSi PNEG-2314 Manual de usuario
Checchi & Magli
Checchi & Magli TEXDRIVE Manual de usuario
Amazone
Amazone Cenius 4003-2TX Manual de usuario
MASSEY FERGUSON
MASSEY FERGUSON MF 9313S Manual de usuario
Cima
Cima BLITZ Instrucciones de funcionamiento y mantenimiento
Amazone
Amazone CombiDisc 3000 Instrucciones de instalación
