SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 2 .1 SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 2 .1
16 17
MEP-7000 CONTROLS SCRATCH LIVE FUNCTIONALITY
1 Eject Ejects track from virtual deck.
2 Memory Sets first cue point. Press and hold to delete cue point.
3 Call Trigger first cue point.
4 Time Time remaining toggle.
5 In/Cue Sets loop in-point if looping is off. If looping is on will jump to start of loop.
6 Out/Adjust Sets loop out-point if loop in-point is set and not yet looping. If looping is on this will allow you to adjust the loop out-point using the jog
wheel. Press again to then set new loop out-point.
7 Reloop/Exit If looping is off this turns looping on and jumps to the start of loop. If looping is on this turns looping off.
8 Scratch Enables Scratch mode.
9 Jog Break Enables Pitch Bend Mode.
10 Pitch Bend - Bend pitch down.
11 Pitch Bend + Bend pitch up.
12 Master Tempo Keylock toggle.
13 Tempo Toggle between 6, 10 and 16% pitch range.
14 Track search |<< Previous track.*
15 Track search >>| Next track.*
*If you hold down either track search button you can then use the jog wheel to scroll through the track library.
16 Search << Rewind.
17 Search >> Fast forward.
18 Cue If playback is paused this button will set the temporary cue point at the current position in the track. Holding down this button then plays
from the temporary cue point.
19 Play/Pause Play/Pause.
20 Tempo Slider Adjusts pitch slider.
21 Load Loads selected track to deck.
22 vJumps cursor to crate library.
23 Knob Scrolls through selected library. Pressing knob jumps cursor between crate and track libraries.
24 wJumps cursor to track library.
PIONEER MEP-7000
AND SEP-C1
INSTALLATION
MAC
1. Connect your MEP-7000 or SEP-C1 to an
available USB port.
2. Your MEP-7000 or SEP-C1 will be detected
automatically and will be ready to use.
WINDOWS xP
1. Connect your MEP-7000 or SEP-C1 to an
available USB port.
2. You will see the following prompt from
Windows: “Can Windows connect to Windows
update to search for software?”
3. Select: “No, not this time”, click “next”.
4. Select: “Install automatically”, click “next”.
5. Windows will then notify you that it has “Found
new Hardware PIONEER SDJ-C1 CONTROL”
followed by “USB composite device”.
6. You will be prompted to install 2 drivers. “USB
composite device” and “USB audio device”.
Follow the prompts as per the usual driver
installation method for Windows.
WINDOWS VISTA
1. Connect your MEP-7000 or SEP-C1 to an
available USB port.
2. You will see the following prompt from
Windows: “Windows needs to install driver
software for your PIONEER SDJ-C1 CONTROL”.
3. Select “Cancel”.
SETUP
1. Start Scratch Live and switch both decks to
internal mode.
2. You will now be able to control Scratch Live
with your MEP-7000 or SEP-C1.
BASIC OPERATION
To select and load tracks use the KNOB (23)
to scroll through your crates and tracks. By
pressing the KNOB you can jump between your
crate and track libraries. Use the LOAD button
(21) to load a track to the virtual deck.
PLAYBACK
Use the PLAY/PAUSE button (19) to play and
pause your tracks. You can control the speed
of the braking as normal in the setup menu of
Scratch Live.
USING CUES
You can set the first cue point using the
MEMORY button (2). You can then delete the
cue point by holding down the MEMORY button.
Press the CALL button (3) to trigger the first cue
point. You can set a temporary cue point at the
current position of the playhead by pressing
the CUE button (18) while playback is paused.
Holding the CUE button will then play from the
temporary cue point.
USING LOOPS
You can create loops by using the IN/CUE button
(5) to set the loop in-point and the OUT/ADJUST
button (6) to set the loop out-point. Once looping
you can press the OUT/ADJUST button again
which then allows you to use the JOG WHEEL
to adjust the loop out-point manually. Press the
OUT/ADJUST button again to set the new loop
out-point. Use the RELOOP/EXIT button (7) to
jump to the start of the loop and turn looping on
or to turn looping off if it is already looping.
3
1
27
68 9
19 1514 21 2217
5
4
18
16
11
12 1310
24
20 23 21
3
1
27
68 9
19 1514 17
5
4
18
16
11
12 1310
20
