A cnurtont
Because abuse will cause burns and fire.
Please strictly comply with the following matters;
a Please avoid abusing the soldering iron, should operate according to the working
instruction.
aDo not touch the metal parts of the soldering iron.
a Do not use the soldering iron nearby the combustible.
a Notice staffs that the soldering nozzle is easy to cause burn or other dangerous accidents, so
please turn off the powei after getting off work.
oBefore replace soldering nozzle, please confirm the power is shut off and the nozzle is cool.
a lt is strictly prohibited to use the product when any damage, especially the power cord damages.
o This product uses three lines ground-plug which must insert the three hole socket. Prohibit
changing the plug or using not ground-plug adapter which results bad ground connection. lf
want to extend wire, please use the three lines ground- power cord.
aPlease don't knock the soldering iron on the table to clear the residual tin slag on iron. Because
thus doing shall result in serious damage to the soldering iron.
aPlease don't replace the solder iron without authorization.
o lt is suggested that replace parts with the original accessories.
a Don't get the solder iron wet. Please do not use or take apart the solder iron and pull the cord
a lt is suggested to work in good ventilation environment, or providing small fans by yourselves
owing to the soldering iron will produce smoke when soldering.
a Prohibit making any damage to body or objects when use the soldering iron.
oChildren don't know the danger of solder iron, so this product should be placed where children
are not easy contact or used and storage where providing admitted supervision.
Use numerical control constant temperature welding table
I . Boot Operation
1. Power-on. Please remember to use groundi
2. Turn on power switch of main machine: ON
ll . Setup Function
Display'F and 'C.
Long press K2 key to enter the setting item:
Short fress K1 key tb enter settings. Shorlpress the K1 key in turn, and display the conversion
between'C and'F. After setting, release the key. Press the KI and K2 keys at tha-same.time--
to save the settings and exit the settings.
)fl'r'a oo*"r. switch (function key K3)
+
Press K1 key
2. Temperature Setting
Long press K2 key, enter the setting item, then continue to short press K2 key to traverse the setting
item, enter the temperature setting item:
Short press K'1 key to enter the setting, short press Kl key to set the temperature of -1 degree. And long
press Kl key, the setting temperature will continue to decrease rapidly during the press of the key; short
press K2 key to set the temperature of +1 degree, long press K2 key, the setting temperature will continue
to increase rapidly during the press of the key. When the preset temperature value is reached, release the
key. Press the K1 and K2 keys at the same time to save the settings and exit the settings.
ffitffiffi'c
ElInffi "p ,mlm,f7'e
mmm.;
mmnb
HNEI'r
3. Compensation Temperature Setting
Long press K2 key to enter the setting item, then continue to press K2 key to traverse the setting
item, enter the compensation temperature setting item:
Short press K'l key to enter the setting, short press Kl key to set the compensation temperature -1
degree, Iong press Kl key to set the compensation temperature to decrease continuously during the
press of the key; short press K2 key to set the compensation temperature +1 degree, long press
K2 key to set the compensation temperature to increase continuously during the press of the key.
When the preset temperature value is reached, release the key. Press the Kl and K2 keys at the
same time to save the settings and exit the seftings.
Operational Guidelines
I
will be saved
I
*,Atteisiittin';statrst l'ieott!,ithitaunay]islitinS witl be saved automatically and exit.
