4 EN
EN
08/2016
2016
Operation / Technical specications
3. Operation
Power supply connection
Before turning it on, make sure that the voltage in your power grid corresponds to the voltage indicated on the rating label.
In the interest of your own safety, carefully read the following instructions before rst connection of this device to the power grid.
If you wish to operate this device, insert the power cord (7) into apower socket with avoltage of 230 V50 Hz and turn it on by
turning the main power switch / turn dial (1).
Controlling the radio
1. To turn on the device (1), turn the volume dial clockwise.
2. Pull out the antenna (6) for the FM band. To optimise FM reception, turn the radio horizontally until the best reception is
achieved.
3. Select the desired broadcast band: AM (2) or FM (3).
4. Tune into the desired station using the tuning dial (5).
5. Set the volume by turning the VOLUME dial (1).
6. Press button (4) to switch the lighting range.
4. Technical specifications
Power source: 230 V~ 50 Hz
AM band: 530 – 1,600 KHz
FM band: 87.5 – 108 MHz
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used electric or electronic products must not be added
to ordinary municipal waste. For proper disposal, renewal and recycling hand over these products to determined
collection points. Or as an alternative in some European Union states or other European countries you may return
your products to the local retailer when buying an equivalent new product. Correct disposal of this product helps save
valuable natural resources and prevents damage to the environment caused by improper waste disposal. Ask your local
authorities or collection facility for more details. In accordance with national regulations penalties may be imposed for
the incorrect disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the necessary information.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information
about the correct disposal method from the local council or from your retailer.
This product meets all the basic requirements of EU directives related to it.
Changes in the text, design and technical specications may be made without prior notice and we reserve the right to make
these changes.
Address of the manufacturer: FAST CR, a. s., Černokostelecká 1621, 251 01 Říčany
The original version is in the Czech language.
EN Warranty conditions
Warranty card is not a part of the device packaging.
This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited to
the following conditions. Warranty is referred only to the customer goods using for common domestic use. The claim
for service can be applied either at dealer’s shop where the product was bought, or at below mentioned authorized
service shops. The end-user is obligated to set up a claim immediately when the defects appeared but only till the end
of warranty period. The end user is obligated to cooperate to certify the claiming defects. Only completed and clean
(according to hygienic standards) product will be accepted. In case of eligible warranty claim the warranty period will
be prolonged by the period from the date of claim application till the date of taking over the product by end-user, or
the date the end-user is obligated to take it over. To obtain the service under this warranty, end-user is obligated to
certify his claim with duly completed following documents: receipt, certificate of warranty, certificate of installation.
This warranty is void especially if apply as follows:
Defects which were put on sale.
Wear-out or damage caused by common use.
The product was damaged by unprofessional or wrong installation, used in contrary to the applicable instruction
manual, used in contrary to legal enactment and common process of use or used for another purpose which has
been designed for.
The product was damaged by uncared-for or insufficient maintenance.
The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).
Defects on functionality caused by low duality of signal, electromagnetic field interference etc.
The product was mechanically damaged (e.g. broken button, fall).
Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable working
conditions (e.g. high temperatures, high humidity, quakes).
Repair, modification or other failure action to the product by unauthorized person.
End-user did not prove enough his right to claim (time and place of purchase).
Data on presented documents differs from data on products.
Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial
number or the warranty seal has been damaged).
Authorized service centers
Visit www.sencor.eu for detailed information about authorized service centers.
