Sennheiser TR 5000 Manual de usuario
RS 5200
Digital wireless TV listening system
Model: TR 5000, RR 5200
Instruction manual
Use the search function, the navigation (left) or the following links:
“Start ”
“Product overview”
“Putting the RS 5200 into operation”
“Using the RS 5200”
“Using the RS 5200’s additional functions”
“If a problem occurs...”
“Specifications”
Sennheiser electronic GmbH & Co. KG
Am Labor 1
30900 Wedemark
Germany
www.sennheiser.com
Version: 06/21 A01
Important safety instructions
2|RS5200
Important safety instructions
▷Read this instruction manual carefully and completely
before using the product.
▷Always include this instruction manual when passing the
product on to third parties.
▷Do not use an obviously defective product.
▷Only use the product in environments where wireless 2.4 GHz
transmission is permitted.
Preventing damage to health and accidents
▷These headphones allow you to set higher volumes than
conventional headphones. Protect your hearing from high
volume levels.
Permanent hearing damage may occur when headphones are
used at high volume levels for long periods of time. Sennheiser
headphones sound exceptionally good and provide clear speech
intelligibility at low and medium volume levels.
▷To prevent hearing damage, set the volume to a low level before
passing the product on to third parties.
▷Do not use the product in an environment that requires your spe-
cial attention (e.g. in traffic or when performing skilled jobs).
▷Always keep the headphones/MCA 800 charging
adapter at least 3.94" (10 cm) from cardiac pacemakers,
implanted defibrillators (ICDs) and other implants. The
headphones/MCA 800 charging adapter generate/s magnetic
fields that could cause interference with cardiac pacemakers,
implanted defibrillators (ICDs) and other implants.
▷Do not use the product near water. To reduce the risk of fire or
electric shock, do not expose the product to rain or moisture.
▷Keep the product, accessories and packaging parts out of reach
of children and pets to prevent accidents. Swallowing and chok-
ing hazard.
▷Only use the power supply units supplied by Sennheiser.
Preventing damage to the product and malfunctions
▷Always keep the product dry and do not expose it to extreme tem-
peratures (hairdryer, heater, extended exposure to sunlight, etc.)
to avoid corrosion or deformation. The normal operating tempera-
ture is from 5 °C to 40 °C/32 °F to 104 °F.
▷Use the product with care and store it in a clean, dust-free envi-
ronment.
▷Switch off the product after use to conserve battery power.
▷Unplug the power supply unit from the wall socket
– to completely disconnect the product from the power source,
– during lightning storms or
– when not using the product for long periods of time.
▷Always ensure that the power supply unit is
– in a safe operating condition and easily accessible,
– properly plugged into the wall socket,
– only operated within the permissible temperature range,
– not exposed to direct sunlight for longer periods of time in order
to prevent heat accumulation.
Important safety instructions
RS 5200 | 3
▷Varnish or furniture polish may degrade the feet of the transmit-
ter, which could stain your furniture. You should therefore place
the transmitter on a non-slip pad to avoid potential staining of fur-
niture.
▷Do not operate the product near heat sources.
▷Clean the product only with a soft, dry cloth.
▷Use only attachments/accessories/spare parts supplied or rec-
ommended by Sennheiser.
Safety instructions for Lithium rechargeable batteries
Intended use/Liability
This wireless TV headphone system is suitable for use with TV sets,
hi-fi systems, and home cinema systems and can be connected to
analog and digital audio sources.
This product is intended for private domestic use only. It is not suit-
able for commercial use. This product is also not intended to be used
with portable audio devices.
WARNING
If abused or misused, rechargeable batteries may leak. In extreme
cases, they may even present a risk of:
•explosion
• heat and fire development
• smoke and/or gas development
• damage to health and/or the environment
Only use rechargeable batteries and chargers recom-
mended by Sennheiser.
Do not charge a product with a built-in rechargeable
battery if the product is obviously defective.
Only charge the product / rechargeable batteries at
ambient temperatures between 5 °C and 40 °C/41 °F
and 95 °F and do not charge them near easily flammable
objects.
Do not heat the product / rechargeable batteries above
70 °C/158 °F. Avoid exposure to sunlight and do not
throw the product / rechargeable batteries into fire.
When not using the product / rechargeable batteries for
extended periods of time, charge them regularly (about
every three months).
Switch rechargeable battery-powered products off after
use.
Dispose of defective products with built-in rechargeable
batteries at special collection points or return them to
your specialist dealer to facilitate recycling.
Important safety instructions
4|RS5200
It is considered improper use when the product is used for any appli-
cation not named in the corresponding product documentation.
Sennheiser does not accept liability for damage arising from misuse
or improper use of this product and its attachments/accessories.
Before putting the product into operation, please observe the
respective country-specific regulations.
Package contents
RS 5200 | 5
Package contents
Online you can find:
• this detailed instruction manual and additional information
(www.sennheiser.com/download)
Stethoset receiver with built-in rechargeable battery,
model: RR 5200
Transmitter with charging compartment,
model: TR 5000
Power supply unit with multi-country adapters
(EU, UK, US, AU),
model: NT 5-10AW
1 pair of silicone ear pads, large
(pre-mounted upon delivery)
1 pair of silicone ear pads, small
1 pair of memory foam ear pads
1 pair of open foam ear pads
Optical digital cable, 1.5 m
Stereo audio cable with 3.5 mm jack plugs, 1.5 m
RCA adapter (3.5 mm jack socket to 2 RCA connec-
tors)
Safety guide
Quick guide
Instruction manual in English, German, French, and
Spanish
The instruction manual in other languages can be
downloaded at www.sennheiser.com/download.
+
Safety Guide
Quick Guide
Instruction
Manual
A list of accessories can be found on the RS 5200 product page
at www.sennheiser.com. For information on suppliers, contact
your Sennheiser partner. To find a Sennheiser partner in your
country, search at www.sennheiser.com/service-support
Product overview
6|RS5200
Product overview
Overview of the stethoset receiver
Model: RR 5200
Ear pads, replaceable
Ear bows with on/off function
Volume buttons +and –
Receiver status
LED
(see page 8)
Speech intelligibility
button
Rmarking for the right ear and Lmarking for the left ear
Built-in rechargeable battery
Charging contacts
2
6
1
3
7
8
4
5
On
Off
Product overview
RS 5200 | 7
Overview of the transmitter
Model: TR 5000
Battery
LED ,
indicating the charging process/remaining operating time
of the receiver (see page 15 und 16)
Balance buttons
for right ear Rand left ear L
Hearing profile
button
for selecting the hearing profiles (see page 23)
Hearing profile
LED ,
indicating the activated hearing profile (see page 23)
Charging compartment for stethoset receiver
Charging contacts for stethoset receiver with holding mag-
nets
Transmitter status
LED
(see page 8)
Digital Optical In audio input (marked pink) for connecting a
digital audio source (optical)
5V DC 1A socket (marked yellow) for connecting the power
supply unit
Analog 3.5 mm In audio input (marked blue) for connecting
an analog audio source (3.5 mm jack socket)
5
4
2
6
7
1
2
3
0
9
8
1A
Product overview
8|RS5200
Overview of the Receiver status LED
Overview of the Transmitter status LED
Receiver status LED The stethoset receiver...
– ... is switched off.
lights up green
... is connected to the transmitter.
lights up red
... is connected to the transmitter, the
rechargeable battery is almost empty.
flashes green
... is not connected to the transmitter or
cannot connect to the transmitter.
flashes red
... is not connected to the transmitter or
cannot connect to the transmitter, the
rechargeable battery is almost empty.
1s1s
1s1s
Transmitter status
LED The transmitter...
– ... is in standby mode.
lights up white
... and the stethoset receiver are
connected. The speech intelligibility
function is deactivated (see page 26).
lights up blue
... and the stethoset receiver are
connected. The speech intelligibility
function is activated (see page 26).
flashes blue and
white
... has detected an incompatible digital
audio signal (see page 11).
Product overview
RS 5200 | 9
Overview of the acoustic signals/beeps
The LEDs on the stethoset receiver and on the transmitter indi-
cate the current operating state. If you are not pressing any
button on the stethoset receiver, the LEDs automatically dim
after approx. 30 seconds to not disturb you.
Beeps Meaning
during operation,
2 beeps
The rechargeable battery is almost
empty, recharge the rechargeable
battery (see page 15).
during operation, no audio
transmission, 5 beeps
The receiver is outside the
transmission range (see page 39).
when changing the volume The maximum or minimum volume
is reached (see page 22).
when changing the balance
setting
The maximum or minimum balance
setting is reached (see page 22).
Putting the RS 5200 into operation
10 | RS 5200
Putting the RS 5200 into
operation
Setting up the transmitter
▷Choose a suitable place near your sound source.
▷Separate the transmitter from other wireless devices in the room
by at least 50 cm/20" to avoid interference.
▷Do not place the transmitter close to metal objects such as shelf
bars, reinforced concrete walls, etc. as this can decrease the
transmitter’s range.
Connecting the transmitter to an audio
source
You can connect the transmitter either to a digital or an analog audio
source (e.g. a TV and a stereo hi-fi system).
If you connect an audio source to both inputs (digital and analog),
only the analog audio source will be reproduced.
▷Switch your audio source off before connecting the transmitter.
▷Check the connection possibilities of your audio source (audio
output, usually marked “OUT”).
▷Select the corresponding connection cable and, if necessary, a
suitable adapter.
▷To connect the transmitter to your audio source, refer to the con-
nection diagram suitable for your audio source (see the following
chapters). Follow the color codings on the transmitter and on the
cables.
You can also refer to the beginner’s video guides on how to con-
nect your digital wireless headphone system to a TV:
www.sennheiser.com/how-to-videos
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Manuales populares de TELEVISOR de otras marcas
Philips
Philips Colour Television Manual de usuario
Toshiba
Toshiba 27A10 Manual de usuario
Philips
Philips 42PF9630A/37 Manual de usuario
Hitachi
Hitachi 32FX48B Manual de usuario
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario
Changhong Electric
Changhong Electric uhd55b6000is Manual de usuario
