Senix CSPX2-M Manual de usuario
20V MAX LITHIUM ION
CORDLESS POLE SAW
Operator's manual
Model:CSPX2-M
CSPX2-M-0
For customer support, please call 1-800-261-3981 or send email to:
SAVE THIS MANUAL FOR FUTURE REFERENCE.
ORIGINAL INSTRUCTIONS
TM
EN - 2 WWW.SENIXTOOLS.COM
1
1
4
2
2
6
7
35
8
9
10
11
12
13
14
1
23
3 - ENWWW.SENIXTOOLS.COM
4
6
98
7
5
Tensioning Gear
Fixing Bolt Sprocket
Unlock Button
Angle Adjustment Button
Light Button
EN - 4 WWW.SENIXTOOLS.COM
10
14
11
15
13
12
Short Long
Safety Switch
Switch Trigger
5 - ENWWW.SENIXTOOLS.COM
25°
A
A
B
CD
A
B
ABC
D
20
17
21
19
18
16
Depth Gauge
Setting 0.025 in.
A- Top Plate
B- Cutting Tip
C- File Position
D- Ridge
Cutter Length
Sharpening Angle
Saw Chain Direction
A - Left-hand Cutter
File Direction
Outside
Inside
A- Right-hand Cutter
B- Left-hand Cutter
C- Bumper Drive Link
D- Tie Strap
Saw Chain Direction
EN - 6 WWW.SENIXTOOLS.COM
TABLE OF CONTENTS
SAFETY & INTERNATIONAL SYMBOLS ...........................6
SAFETY INSTRUCTIONS...................................................7
KNOW YOUR UNIT............................................................15
SPECIFICATIONS*............................................................15
ASSEMBLY.........................................................................16
OPERATION.......................................................................17
MAINTENANCE..................................................................20
TROUBLESHOOTING.......................................................22
PARTS................................................................................23
WARRANTY.......................................................................24
SAFETY & INTERNATIONAL
SYMBOLS
Explanation of safety & international symbols describes
safety and international symbols and pictographs that may
appear on this product. Read the operator’s manual for
complete safety, assembly, operating and maintenance and
repair information.
Caution / Warning.
To reduce the risk of injury, user must read
instruction manual.
Wear tight-tting protective clothes.
Wear protective gloves.
Wear Sturdy, non-slip footwear.
Always wear eye protection, ear protection
and head protection meeting ANSI Z87.1
standards.
DANGER – Keep hands away from blade.
DANGER!
Risk of electrocution!
Indoor use only. Only use battery charger
indoors.
Tip contact can cause the guide bar to to
move suddenly upward and backward,which
can cause serious injury.
Keep bystanders a safe distance away from
the work area.
Do not use in rain or wet conditions.
Do not dispose of battery packs in rivers or
immerse in water.
Do not dispose of battery packs in fire. They
will explode and cause injury.
Use and store the battery within an temperature
below 122°F (50°C).
Do not disassemble, crush, heat above
212°F (100°C) ; Never expose the battery to
microwaves or high pressures.
7 - ENWWW.SENIXTOOLS.COM
SAFETY INSTRUCTIONS
All Operators Must Read These
Instructions Before Use.
Always follow these safety
guidelines. Failure to do so may
result in serious bodily injury or
death.
DANGER!
This indicates a hazardous situation,
which, if not followed, could cause
serious injury or death.
WARNING!
This indicates a hazardous situation,
which, if not followed, could result in
serious injury or death.
CAUTION!
This indicates a hazardous situation,
which, if not followed, could result in
minor or moderate injury.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING!
When using cordless yard tools,
basic safety precautions should
always be followed to reduce the
risk of fire, electric shock and
personal injury, including the
following:
1. Keep guards in place –
Protective guards should
be checked periodically to
ensure they are properly
tted and in correct working
order.
2. Keep work area clean and
well-lit – Clear work area
of branches and limbs
after each cutting session.
Cluttered areas invite accidents.
3. Do not use in dangerous
environments – Do not use
power tools in damp or wet
locations.
4. Do not use the pole chain
saw in the rain.
5. Keep bystanders and
children away – All
bystanders, including
children and pets, should be
kept a safe distance away
from the work area.
6. Do not force the tool – It will
do the job effectively and
safely if it is used at the rate
for which it was designed.
7. Use the right tool – Do
not force the tool or any
attachment on the tool to do
a job for which they were not
designed.
8. Wear proper apparel – Do
not wear loose articles of
clothing or jewelry since
such items may get caught
EN - 8 WWW.SENIXTOOLS.COM
addition, check for alignment
of moving parts, binding
of moving parts, breakage
of parts and any other
conditions that may affect
the tool's operation.
14. Never leave tool unattended
while it is running – Turn
the power OFF by removing
the battery from the unit.
Do not leave the saw until
the cutting bar comes to a
complete stop.
15. Do not grasp the exposed
cutting blade or cutting
edges when picking up or
holding the saw – Be sure to
encase the cutting bar in its
protective sheath when not
in use.
16. Disconnect tool – Turn
off the power switch and
remove the battery when it is
not in use, before servicing,
when transporting or when
changing the chain or other
accessories.
17. Stay alert – Watch what you
are doing. Use common
sense. Do not operate the
pole chain saw when you
are tired.
18. Store idle tool indoors –
When not in use, appliances
in moving parts. Use of
heavy-duty rubber gloves,
substantial non-skid
footware and close-tting
clothing is recommended
when working outdoors with
power tools.
9. Wear protective hair
coverings to contain long hair.
10. Always wear safety glasses
and ear defenders to provide
eye and ear protection –
Everyday eyeglasses only
have impact resistant lenses
and do not provide the same
protection as safety glasses.
11. Wear face or dust masks
– If the cutting operation
is dusty, the use of a face
or dust mask specially
designed to lter out
miscoscopic particles is
recommended.
12. Use recommended
accessories – Consult
the owner’s manual for
recommended accessories.
The use of improper
accessories may cause risk
of injury.
13. Check for damaged parts
– Before each use, repair
or replace any guard or
part that is damaged. In
9 - ENWWW.SENIXTOOLS.COM
should be stored indoors in
a dry and high or locked-up
place out of the reach of
children.
WARNINGS FOR ALL BATTERY-
OPERATED APPLIANCES
1. Prevent unintentional
starting. Ensure the power
switch is in the off-position
before connecting to battery
pack, picking up or carrying
the appliance. Carrying the
appliance with your nger
on the power switch or
energizing the appliance
that has the power switch on
invites accidents.
2. Make sure the power switch
is off and the battery pack
is removed before clearing
jammed material, making
adjustments, changing
accessories, storing or
servicing the appliance.
Unexpected actuation of
the appliance while clearing
jammed material or servicing
may result in serious
personal injury.
3. Recharge only with the
charger specied by the
manufacturer. A charger that
is suitable for one type of
battery pack may create a
risk of re when used with
another battery pack.
4. Use appliances only with
specically designated
battery packs. Use of any
other battery packs may
create a risk of injury and re.
5. When battery pack is not
in use, keep it away from
other metal objects, like
paper clips, coins, keys,
nails, screws or other small
metal objects, that can
make a connection from one
terminal to another. Shorting
the battery terminals
together may cause burns or
a re.
6. Under abusive conditions,
liquid may be ejected from
the battery; avoid contact. If
contact accidentally occurs,
ush with water. If liquid
contacts eyes, additionally
seek medical help. Liquid
ejected from the battery may
cause irritation or burns.
(This advice is considered
correct for conventional
NiMh, NiCd, lead acid and
lithium-ion cell types. If
this advice is incorrect for
a cell design that differs
EN - 10 WWW.SENIXTOOLS.COM
product is maintained.
11. Do not modify or attempt to
repair the appliance or the
battery pack (as applicable)
except as indicated in the
instructions for use and care.
POLE SAW SAFETY WARNING
WARNING!
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Save all warnings and instructions
for future reference.
The term “power tool” in the
warnings refers to your battery-
operated (cordless) power tool.
1. Familiarize yourself with the
operation of the pole chain
saw and learn to use it properly.
2. Never permit others
(especially children) who
have not read the manual to
use the machine.
3. Never remove the labels or
security elements.
4. Check the oil level before
each use of the pole chain
saw. Never use the pole
chain saw without oil in the
tank or when the amount of
from these, then the correct
advice may be substituted.)
7. Do not use a battery pack or
appliance that is damaged
or modied. Damaged or
modied batteries may
exhibit unpredictable
behavior resulting in re,
explosion or risk of injury.
8. Do not expose a battery
pack or appliance to re
or excessive temperature.
Exposure to re or
temperature above 130°C
may cause explosion. The
temperature of 130°C
can be replaced by the
temperature of 265°F.
9. Follow all charging
instructions and do not
charge the battery pack
or appliance outside of
the temperature range
specied in the instructions.
Charging improperly or at
temperatures outside of the
specied range may damage
the battery and increase the
risk of re.
10. Have servicing performed
by a qualied repair
person using only identical
replacement parts. This will
ensure that the safety of the
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Sierra de pértiga de Senix
