Sengled W1G-N84 Manual de usuario
USER GUIDE
Model: W1G-N84
SMART WI-FI LED TV LIGHT STRIPS
(with Built-in Microphone)
smart lighting expert
AUDIO SYNC
1
Introduction:
Sengled Smart Wi-Fi LED TV Light Strips oer an easy solution to
enhance your TV/Movie/Game time to a new level and bring you the
smart home experience. These segmented light strips can be easily
mounted on the back of the TVs and large monitors. They enable you
to control your lights in multiple ways– On/O, dimming, color change,
color temperature change, schedule, scene setting, dynamic audio
sync, movie mode, game mode, music mode and more through
Sengled Home app, or simply though voice control using Amazon
Alexa or Google Assistant.
Important Safety Information:
Before installing the Sengled Smart Wi-Fi LED TV Light Strips,
please read and follow all precautions, including:
• Turn o power before installation or removal. Discontinue use if
damaged.
• Risk of electric shock. Do not attempt to disassemble light strip.
• Not suitable for completely enclosed fixtures.
• Suitable for use in operating environment between
14°F and 104°F (-10°C and 40°C).
• Not for use in emergency lighting.
• Indoor use only.
Wireless Specification:
• Wireless Frequency Range:
2.4GHz (2412MHz ~ 2484MHz, IEEE 802.11b/g/n)
• Operating Channels Wi-Fi: 1 - 13
• Maximum Transmitted Output Power: +18dBm
Note: No smart home hub is required to control Sengled Smart
Wi-Fi LED TV Light Strips.
2
Installation Instructions:
1) Measure the mounting surface at the back your TV or monitor and
choose the best length combination. Easily configure pieces to fit 45”
to 72” TV screens.
Light Strips
with 3M Tape
(2) 40” Light Strips
(2) 20” Light Strips
Power
Adapter
(4) 10” Light Strips
Strip Clips
Reset Pin
Cleaning Pads
ALCOHOL
PAD
Wi-Fi Controller with
3M mounting pads
3M
3M
Corner
Extensions
X 3
.25M (.8’) x 4
What is include in the box?
45-55“
.5M (1.6’)
1M (3.3’)
3
2) Please stick the LED light strip on suitable TV surface (flat is
preferred). DON’T use on knitted or wool fabrics, dusty wall, rough
plastic surface or frosted glass etc. Use the alcohol pad to clean the
surface first and wait for surface gets dry.
Notice: Alcohol Pad should only be used for cleaning the dust of TV
surface, please don’t use it wipe the silicone of light strip.
65-72“
3) Considering the self-weight of strip controller and the orientation of
the microphone, fix the Strip Controller in the right way.
.25M (.8’)
.5M (1.6’)
1M (3.3’)
4
4) Peel o tape and stick the strip to the TV back side surface. Please
press and hold strip to surface to make sure proper adhesion.
5) At the corner of the TV back side, please use an extension cable to
connect each strip segment. Please do not bend the light strip.
Please make sure the Arrow (on Light Strip) is always align with the
Notch (on Extension Cable).
+12V
+12V
+12V +12V
×√
5
6) If somewhere adhesive is not strong enough, use the clips to
reinforce the strip. We recommend to use two clips for each
horizontally mounted light strip.
7) Peel o tape and stick the Controller to the TV back side, where
easy to press and near to TV's speaker.
8) Connect the controller to the power adapter, and plug it in.
Finished Installation.
+12V
+12V
Reset Instructions:
To reset your Smart Wi-Fi LED TV Light
Strip, locate the reset button, push and
hold for at least 5 seconds. When the
Light Strip is successfully reset, it will
flash three times. If it does not flash,
please try again. Once successfully
reset, please pair the Light Strip again
in your Sengled Home app.
Reset Button
6
The following instructions are applicable to adding your Smart Wi-Fi
LED TV Light Strips through the Sengled Home app.
If you would like to use third party smart home services, such as
Amazon Alexa, Google Assistant or SmartThings, or would like to find
our latest list of supported third-party integrations, please refer to
support.sengled.com
Ensure your mobile device is connected to the same Wi-Fi router that
you would like to setup the smart Wi-Fi LED using 2.4GHz connection.
1
3Open the Sengled Home app. Go to Devices, select the +sign,
and choose Smart Wi-Fi LEDs.
Follow in-app instructions to finish setup.
4Ensure your Sengled Home app can discover the light strip. If the
app unsuccessfully discovers the light strip, please refer to the next
section "Reset Instructions" for how to reset your light strip before
attempting to add it back in.
Congratulations on successfully installing your Smart Wi-Fi LED TV
Light Strips!
Download the latest version of the Sengled Home
App from the Apple App Store or Google Play Store.
2Register and sign in to your Sengled account in the app.
Operation:
The following section outlines some of the popular operational modes
of the Sengled Smart Wi-Fi LED TV Light Strips.
On / O
The light strip can be controlled through a variety of means:
Use the control button on the controller
• Through Sengled Home app (including Widget)
• Through partner programs like Alexa, Google Assistant,
SmartThings (cloud-to-cloud), etc.
Dimming
The light strip can be dimmed through the following:
• Through Sengled Home app (including Widget)
• Through partner programs like Alexa, Google Assistant,
SmartThings (cloud-to-cloud), etc.
Scheduling
Schedules can be created with Sengled Home app.
A
B
C
Check the in-app how-to pages through "Settings" for the
following operations.
Voice Control
• Set up Amazon Alexa by adding Sengled Home Skill.
• Set up Google Assistant by adding Sengled Home Service.
D
Tuning Whites
Adjust whites via the white palette in the Sengled Home app,
or with voice control.
Changing Colors
Change between 16 million colors using the color palette in
the Sengled Home app, or with voice control. By push and
hold the button on the controller, the light strip will cycle
through dierent colors.
Audio Sync
Built-in high sensitivity Microphone for dynamic audio sync,
support multi scenes to select, such as Movies, Games, Music
and Custom. Use Sengled Home app to play with these
modes.
E
F
G
7
Frequently Asked Questions:
1. Sengled Smart Wi-Fi LED TV Light Strip appears oline or
unresponsive, what should I do?
a) Please check the Power adapter make sure the power is On. Push
the control button to make sure the light strip is responding.
b) Power cycle the Wi-Fi LED TV Light Strips, wait 1 minute and
check the status.
c) Please make sure your home Wi-Fi network and internet
connection is working properly.
d) After setup for TV, there is almost no flexibility for people to move
the controller around.
e) If all else fails, try to restart your Wi-Fi router.
2.Can dierent types of Sengled smart bulbs be used
simultaneously?
Sengled Smart Wi-Fi TV Light Strips can be used in conjunction
with their Wi-Fi bulbs and Zigbee counterparts, the Sengled Smart
LED bulbs line, when creating scenes and schedules within your
home. Please refer to sengled.com for more information.
3.Could not connect to the Wi-Fi router or third-party services?
The firewall or port on your Wi-Fi router may be blocked and could
prevent the Sengled Wi-Fi TV Light Strips from connecting to the
Sengled cloud. A Sengled Home account is required to access
third-party services that utilize the Sengled cloud.
Please open Port 1883 and 8883 on your Wi-Fi router to ensure
connectivity. If your router is preventing access, you will need to
enable access to these ports.
If you need help with changing your firewall settings:
For routers provided by your internet service provider, please
contact your internet service provider.
For a router you own, please contact the manufacturer of the router.
4. Can I cut the TV light strip if it's too long?
We recommend users to use dierent length combinations to fit
dierent TV sizes. But if you really need to cut the strip for better
fitting, please cut along the Cut Line.
8
9 1503260467 / v2.0
Limited Warranty:
2-year limited warranty from original purchase date. Sengled restrict
warranty service for smart home device to the country where
Sengled or its authorized retailor originally sold the device. To learn
more about the Limited Warranty for Sengled products, please visit
www.sengled.com/warranty
Support:
If you encounter any issues, please reach out to your local Sengled
Support team.
Visit the following website for web support:
https://support.sengled.com/
Send emails to:
Support@sengled.zendesk.com (USA)
[email protected]sk.com (CA)
Dial Customer Support Line 1-877-401-5990
10:00am-8:00 pm CST on Mon-Fri
11:00am-8:00 pm CST on Sat
4) Peel o tape and stick the strip to the TV back side surface. Please
press and hold strip to surface to make sure proper adhesion.
5) At the corner of the TV back side, please use an extension cable to
connect each strip segment. Please do not bend the light strip.
Please make sure the Arrow (on Light Strip) is always align with the
Notch (on Extension Cable).
To Shorten:
+12V +12V
G G
R R
B B
Cut Line
Tabla de contenidos
Otros manuales de Equipo de iluminación de Sengled
Sengled
Sengled Soft White A19 Bulbs Manual de usuario
Sengled
Sengled ZM005 Manual de usuario
Sengled
Sengled Snap Crystal N1E-EE6 Manual de usuario
Sengled
Sengled B11-U21W Manual de usuario
Sengled
Sengled W1G-N83W3 Manual de usuario
Sengled
Sengled element Z01-hub Manual de usuario
Sengled
Sengled 0059693040 Manual de usuario
Sengled
Sengled Smart Manual de usuario
Sengled
Sengled smartsense 0058693001 Manual de usuario
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
