Sencor STB 1182 Manual de usuario
REFRIGERATOR
STB 1182
EN
User manual
Dear customer,
Thank you for buying a SENCOR brand product. So that your appliance serves you well, please read
all the instructions in this user‘s manual.
EN - 1
01/2013
Copyright © 2013, Fast ČR, a. s.
CONTENTS
PART 1: BEFORE PUTTING INTO OPERATION................................................................................................. 2
• Safety notice .....................................................................................................................................................................................2
• Safety instructions for gas R600a ..............................................................................................................................................4
PART 2: DESCRIPTION OF THE APPLIANCE .................................................................................................... 5
PART 3: INSTALLATION.................................................................................................................................... 6
• Transport and unpacking ............................................................................................................................................................6
• Placement ..........................................................................................................................................................................................7
• Cleaning before use .......................................................................................................................................................................8
• Electrical connection .....................................................................................................................................................................8
• Procedure for switching the door opening direction ........................................................................................................9
PART 4: SETTING THE TEMPERATURE........................................................................................................... 11
PART 5: ARRANGEMENT OF FOOD ............................................................................................................... 12
PART 6: REGULAR MAINTENANCE................................................................................................................ 13
• Cleaning the refrigerator .......................................................................................................................................................... 13
• Changing the light bulb ............................................................................................................................................................ 14
PART 7: WHAT SHOULD I DO WHEN.............................................................................................................. 15
PART 8: INFORMATION SHEET ...................................................................................................................... 16
EN - 2
01/2013
Copyright © 2013, Fast ČR, a. s.
PART 1: BEFORE PUTTING INTO OPERATION
Safety notice
Symbols:
General advice for the optimal operation of the appliance
General dangers
Hot surfaces
Before you put the appliance into operation
• Carefully study the user's manual and installation instructions before installing and using the appliance!
This user's manual includes important information regarding the installation, operation and maintenance
of the appliance. Store the user's manual also for future reference, or for other owners of the appliance
if the appliance is sold.
If the appliance is transported in a horizontal position the oil from the compressor may leak into the
cooling circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before
turning it on, so that the oil ows back into the compressor.
After unpacking the appliance, carefully inspect that it has in not been damaged in any way. Also
check that the power cord is not damaged. If you discover any defects, turn o the appliance and
contact the vendor or in the case of a damaged power cord contact the service centre. If the appliance
and all its parts are in order, install it according to the instructions in the relevant chapter.
• When installing the appliance in its place, or when moving the appliance, the power cord could be
penetrated or damaged. Check that the power cord is not interfering anywhere.
• Before connecting the appliance to the electricity power source check that the capacity of the system
corresponds to the speci cations on the appliance's rating label.
• Any kinds of home electric wiring necessary for the connection of the appliance must only be carried out
by a quali ed electrician.
If you move the appliance from its usual position, it is necessary to understand, that although you
have disconnected the power cord, the components on the rear side of the appliance may remain very
hot for some time.
This appliance is not designed to be built-in. Do not cover or block the air in ow or out ow openings.
Insu cient ventilation will cause bad operation and damage to the appliance.
Operating the appliance
• Use the appliance only for the purposes for which it has been designed.
• This appliance is designed only for household use, for storing food.
• The temperature inside the refrigerator may rise or fall slightly, and so these appliances are not suitable for
storing products (e.g. medicines), which require a stable temperature.
Do not use any other electric appliances (e.g. heating elements, electric ice cream machines, etc.)
inside the appliance. There is a danger of explosion!
EN - 3
01/2013
Copyright © 2013, Fast ČR, a. s.
Do not place food inside the refrigerator containing ammable propulsion gases (e.g. sprays) and no
explosives, contaminants or volatile substances. There is a danger of explosion!
• Store liquor only with a rmly tightened cap and in a vertical position.
• Do not use the base, drawers, door of the appliance, etc. as a step or as a support. There is a danger of injury
to persons or damage to the appliance.
• Ensure that the plastic parts of the appliance and the door seals are not soiled with oil or grease. The plastic
parts and the seals would then become porous.
We do not recommend placing hot liquids or food inside the refrigerator and lling containers all the
way to the rim.
Do not put fragile, heavy or unstable objects on the refrigerator.
Children in the household
• Never leave packaging and its parts with the children. There is a danger of poisoning or su ocation by the
cardboard boxes and plastic sheets!
• This appliance is in no way a toy for children!
• For appliances with door locks: do not leave keys within the reach of children!
• If you will no longer be using the refrigerator, remove the door, seals and store it in a safe place. In this way
you will prevent the danger of children becoming trapped inside the refrigerator.
Maintenance and cleaning
Before you begin with regular or exceptional maintenance, disconnect the appliance's power cord or
turn o the fuse or circuit breaker. Never pull the electric power cord, only pull on the power plug.
General instructions
• This appliance must not be used by persons (including children) with physical, sensory or psychological
impairments or by inexperienced persons, unless properly trained or schooled in the safe use of the
appliance, or unless they have been properly supervised by a person who will be responsible for their
safety. Children should be supervised so as not to play with the appliance.
• This appliance has been tested in accordance with the directives in force in the European Union.
• The tightness of the cooling circuit has been veri ed.
• This appliance conforms to the relevant safety provisions for electrical appliances in force in the European
Union.
EN - 4
01/2013
Copyright © 2013, Fast ČR, a. s.
Technical safety
The appliance contains a cooling gas, ISOBUTHAN (R600a). Only transport or move the appliance
with the utmost care, prevent excessive impacts and shaking to prevent damaging
the appliance. If the cooling circuit becomes damaged and the cooling gas may be escaping, there is a
risk of an explosion, which may be ignited by a spark or ame. If the appliance shows signs of damage, it must
not be put into operation. In such a case contact the service centre, ventilate the room where the appliance is
located and prevent the spreading of ames or other interference with the appliance.
Safety instructions for gas R600a
Measures in case of an unexpected release
If ventilation is possible, allow the material to evaporate.
Characteristics of the gas
The gas is highly ammable, it is necessary to completely prevent contact with an open ame and hot surfaces.
Because the R600a gas is heavier than air, it may become very concentrated at the level of the ground, where
ventilation is weak.
First aid
Inhalation
Take the a ected person from the contaminated area to a warm, well ventilated location. Staying in
a contaminated location for a long time may cause su ocation, or potentially loss of consciousness. If
necessary, provide mouth-to-mouth resuscitation and in exceptionally serious situations, under expert
medical supervision, give oxygen.
Contact with the skin
Random contact with the skin will not endanger health, it is better to thoroughly wash the a ected area. The
liquid spray or dispersed liquid may cause frost bite, wash the a ected area with large amounts of water and
contact a medical doctor.
Contact with the eyes
If eyes have been a ected, wash out with large amounts of water, while trying to keep the eyes open, and call
a specialised doctor as soon as possible.
If contact or inhalation of the R600a gas occurs, contact your medical doctor.
EN - 5
01/2013
Copyright © 2013, Fast ČR, a. s.
PART 2: DESCRIPTION OF THE APPLIANCE
1.
2.
3.
4.
5.
6.
7.
1. Freezer door
2. Light bulb and temperature control dial
3. Refrigerator shelves
4. Cover of the fruit and vegetable drawer
5. Fruit and vegetable drawer
6. Top shelf
7. Bottom shelf
NOTE:
The picture is for illustration purposes only, some parts may dier from the nal appliance due
to improvements made to the appliance during its production.
EN - 6
01/2013
Copyright © 2013, Fast ČR, a. s.
PART 3: INSTALLATION
Transport and unpacking
If the appliance is transported in a horizontal position the oil from the compressor may leak into the cooling
circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before turning it on, so that
the oil ows back into the compressor.
Remove the external packaging, remove the protective plastic lm from the surface of the appliance (if used)
and clean the external parts of the appliance with an agent designed for this purpose. Do not use steel wool or
any coarse agents, which could irreparably damage the surface of the appliance. Carefully remove all papers
and adhesive tape from the appliance, door and other parts packed in polystyrene. Remove documents and
accessories from inside the appliance.
The packaging material is recyclable and is marked with a recycling symbol. For disposal follow the local
regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of children,
because they present a possible source of danger.
Carefully inspect the appliance. If you discover any defects, stop the installation and contact the vendor.
Operating conditions
The proper operation of the appliance, the cooling temperature are guaranteed only when the following
conditions are met:
The temperature in the room where the appliance is located conforms to the climate class stated on the
appliance's rating label.
Maximum ambient relative humidity: 90%.
The appliance must be placed at a su cient distance from heat sources (e.g. baking ovens, central heating,
direct sunlight, etc.).
The appliance must be located in such a place that it is protected against the e ects of weather.
Regular maintenance is performed according to the instructions in this user's manual.
The ventilation openings in the cover of the appliance must not be covered by anything.
Correct installation (e.g. levelling, the capacity of the system correspond to the speci cations on the rating
label of the appliance.)
Table – Climatic class
Climatic class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
EN - 7
01/2013
Copyright © 2013, Fast ČR, a. s.
Placement
The location for the placement of the appliance must meet the requirements in the paragraph "Operating
conditions" and must have a stable oor with a load bearing capacity corresponding to the weight of the appliance.
Furthermore you must maintain distances and dimensions of the appliance, so that correct operation
is ensured:
1. Top part at least 20 cm;
2. Rear part at least 10 cm;
3. The wall on the side where the door opens at least 30 cm.
Ventilation requirements
The area behind the appliance must provide for su cient air circulation.
Level the appliance using the adjustable feet, ensure there is a gap between the bottom edge of the appliance
and the ground, so that there is su cient circulation of the cooling air, by which you will ensure the optimal
performance of the cooling circuit.
Check whether any cooling circulation pipes have been damaged during the installation.
Use the appliance only for the purposes for which it has been designed.
The appliance must be located on a rigid and even surface.
In this way you will ensure free circulation of the coolant and e ective operation of your appliance.
If possible, place the appliance into a cool, well ventilated and dry room.
Do not locate the appliance in direct sunlight, or in a room with a high temperature, in the vicinity of any
sources of direct heat, such as heating, an oven, a stove, etc. – this would mean that the compressor would
need to work a lot harder resulting a substantially higher power consumption level.
If it is not possible to prevent the installation in the vicinity of a heat source, we recommend the insertion of an
appropriate insulating board (do not use asbestos) between the appliance and the heat source; or at least to
maintain the following minimum distances:
From a gas or electric stove 5 cm;
From a heater or oven, etc. 50 cm;
From another cooling appliance 2 cm.
Do not place any appliances on the appliance, which release heat on to the appliance, such as microwave
ovens, toasters, etc.
Never cover the ventilation grill. Pull out the power plug by pulling on the plug itself, never pull on the cord
when disconnecting the appliance.
EN - 8
01/2013
Copyright © 2013, Fast ČR, a. s.
Before turning on the appliance allow it to stand in its nal location for 12 hours, the coolant circuit
will stabilise in this way and no operating problems will occur. Before connecting the appliance to the
power grid check that it is perfectly dry inside – especially in the corners.
Danger warning
The coolant may be highly ammable, depending on its composition. The coolant circuit was
hermetically closed and sealed and was tested many times for possible leaks. Any unqualied
tampering with the product may cause a re hazard. Check that there is no mechanical interruption
or eect on the coolant circulation, namely in the accessible parts around the compressor.
Only professionally qualied persons may work on the cooling system.
Cleaning before use
Check that you have removed from the appliance all adhesive tape used to hold accessories . Then clean all the
inside parts using lukewarm water with a neutral cleaning agent, vinegar or sodium carbonate – in this way
you will remove the characteristic odour of new parts – then dry carefully. Do not use detergents or aggressive
agents, which could damage the surfaces.
Electrical connection
Before connecting the power plug to the power socket, check that:
Your hands are completely dry.
The voltage and frequency shown on the rating label of the appliance corresponds to that in the home
power grid (permitted tolerance from -6% to +6% for nominal voltage, for use with di erent voltages, use
a voltage changer with the corresponding parameters).
The cord and the plug are not damaged or caught under heavy objects.
The power cord is not excessively tensioned, it is not permitted to use an extension cord.
Do not connect the appliance to a voltage recti er (e.g. solar power plant) or use an extension cord.
The appliance must be connected to a working grounding lead. If the power socket of the home
system is not grounded in accordance with the current legal regulations, connect the appliance
after consulting a specialised technician to the grounding lead itself. The manufacturer takes no
responsibility for injuries caused as a result of not following these instructions.
If you do not correctly level the freezer during the installation, the doors may not close shut and seal
properly, which may cause problems with the cooling, ice build up or moisture. Levelling the freezer is
very important.
Level the freezer using the adjustable feet – turn them clockwise to lift the freezer and turn them anticlockwise
to lower the freezer.
Tabla de contenidos
Idiomas:
Otros manuales de Refrigerador de Sencor
