Senco FinishPro 35 Manual de usuario

Fastening Solutions™

The only way to work.®

Safety First.

FinishPro®

15 Gauge Angled Finish Nailer

The FinishPro 35 angled ﬁnish nailer’s lightweight, well-balanced

construction enables the users to work all day by reducing fatigue and

increasing productivity. The FinishPro 35 drives 1-1/4" to 2-1/2" ﬁnish

nails for maximum versatility.

Applications:

Cabinets, interior trim, bookshelves, door casements, crown molding,

chair rails, exterior trim

Features and Beneﬁts:

• Adjustable depth-of-drive

• Adjustable exhaust

• Easy-clear latch to clear jams fast

• Full soft grip – for comfort and control

• No-mar pad – to protect work materials

• Available in dual action or restrictive ﬁre

• One-year warranty

• Includes case, ﬁtting, oil, and fastener rebate

Tool Speciﬁcations:

Tool Weight: 4.7 lbs (2.1 kg)

Height: 11.9" (302 mm)

Length: 13.4" (340 mm)

Nail Capacity: 110

Reg. Operating Pressure: 70-120 psig

Mode of Operation: Available with either Dual Action or

Restrictive Trigger activating mechanisms

Fastener Speciﬁcations:

Gauge: 15

Fastener Range: 1-1/4" – 2-1/2"

Finish: Bright Basic/Galvanized

The only way to work.®

Safety First.

Fastening Solutions™

FinishPro®

15 Gauge Angled Finish Nailer

Adjustable

Depth-of-Drive

Drives nails to a

consistent and

controllable depth

No-Mar Pad

Protects woodwork

Angled Magazine

For tight spaces

Easy-Clear Guide Body

To clear jams fast

Soft Grip

Reduces fatigue,

increases productivity

Adjustable Exhaust

Quiet design No-Mar Bumper

Protects work surface

Always read the Operators Manual and Safety Instructions with all tools to ensure

proper use and safety precautions or contact SENCO for more information on our

trigger systems. Choose the right trigger system for your specific needs!

For additional information on how SENCO Fastening Solutions will save you time,

reduce costs, and increase quality, call our toll-free Action Line: 1-800-543-4596 to

find your nearest Authorized Senco Dealer or Distributor.

Visit our web site at: www.senco.com

Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates

in the following a sequence - depress the safety element at the nose of tool against the

work surface then pull the trigger. After each fastener is driven, release the trigger and

lift the tool off the work surface before starting the sequence again. This trigger is

recommended and acceptable for most applications.

Contact Actuation Trigger (also known as dual action, bounce or bottom fire)

operates in the following sequence- pull the trigger first and keep the trigger pulled

while moving the tool along the work surface with a bouncing motion, depressing the

safety element at the nose of the tool against the work surface where the fastener is to

be driven. This trigger is recommended for use by trained professionals only in high

production or volume applications.

Otros manuales de Pistola de clavos de Senco

Senco

Senco ISANTA GT60i-NN Manual de usuario

Senco

Senco FramePro 651 Manual de usuario

Senco

Senco SHF15 Manual de usuario

Senco

Senco SHS50XP-N Manual de usuario

Senco

Senco PC0701 Manual de usuario

Senco

Senco Nail Gun Manual de usuario

Senco

Senco FinishPro 15 Manual de usuario

Senco

Senco SNS200XP Manual de usuario

Senco

Senco FinishPro 41 XP Manual de usuario

Senco

Senco RoofPro455XP Manual de usuario

Senco

Senco AirFree 32 Manual de usuario

Senco

Senco SPBN18XP Manual de usuario

Senco

Senco HNS5015P Manual de usuario

Senco

Senco SFN30 Manual de usuario

Senco

Senco SHF10 Manual de usuario

Senco

Senco SFN2 Manual de usuario

Senco

Senco SN902XP Manual de usuario

Senco

Senco FramePro 751XP Manual de usuario

Senco

Senco FinishPro 16XP Manual de usuario

Senco

Senco FramePro 650 FRH Manual de usuario

Senco

Senco AnchorPro60 Manual de usuario

Senco

Senco SN71P1 Manual de usuario

Senco

Senco FramePro 752XP Manual de usuario

Senco

Senco A20 Manual de usuario

Manuales populares de Pistola de clavos de otras marcas

Performance Tool

Performance Tool M643 Manual de usuario

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Manual de usuario

Parkside

Parkside PET 25 B1 Manual de usuario

Grizzly

Grizzly G1847 Manual de usuario

Ryobi

Ryobi R18N18G Manual de usuario

Black & Decker

Black & Decker 492848-00 Manual de usuario

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Manual de usuario

Metabo HPT

Metabo HPT NR 3690DC Manual de instrucciones

Surtek

Surtek CN650 Dimensiones y guía de instalación

Makita

Makita GF600 Manual de usuario

Parkside

Parkside PET 25 B1 Manual de usuario

Freeman

Freeman P50LSLW Manual de usuario

Aicon PRO

Aicon PRO DAC4507 Manual de usuario

DAJ

DAJ XR150A Manual de usuario

Makita

Makita AN923 Manual de usuario

Grizzly

Grizzly T20644 Manual de usuario

Black & Decker

Black & Decker 90514937 Manual de usuario

Alfamacchine

Alfamacchine Minigraf 4 Manual