SENADA AUSTIN Manual de usuario
1
AUSTIN
OWNER’
SMANUAL
2
Welcome
Thank you for purchasing AUTSIN from Senada Bikes.
Please read carefully and understand this manual fully before
assembling and riding your bike.
If you have questions after reading this manual, please
contact us by email.
We are here to help!
Email:[email protected]
3
Table of Contents
Attentions ................................................................. 4
General Info ...............................................................8
Product parameters ....................................................... 17
Manual control instrument ..................................................20
Display content introduction ................................................ 21
Button introduction ....................................................... 276
4
Attentions
Battery and Charging:
Charge at 0℃～45℃（32-113℉）, discharge at -20℃〜60℃（68-140℉), please keep
the battery dry. Do not put the battery in acidic or alkaline liquid. Avoid rain and keep
away from fire, heat, and high-temperature environments.
It is strictly forbidden to connect the positive and negative poles of the battery
reversely. It is strictly forbidden to damage, disassemble the battery or cause
short-circuit.
Please use the original charger for charging, with a charging time of no more than 8
hours and a charging current no larger than 2A. When not in use for a long time,
please store the battery in a cool and dry place, and charge the battery for 5 hours
every month. The user must follow the manual instructions when charging, otherwise,
the consequences will be at their own risk.
Pay attention to the battery type and applicable voltage that the charger can charge,
and it is strictly forbidden to mix. When charging the battery, it should be placed in a
ventilated environment. It is strictly forbidden to charge in residential buildings,
5
enclosed spaces, or under sunshine and in high-temperature environments. When
charging, plug in the battery first, then connect to the power supply socket; after full
charge, disconnect the socket side first, and then unplug the battery. When the green
light is on, the power supply should be cut off in time, and it is forbidden to connect the
charger to the AC power supply for a long time without charging.
During the charging process, if the indicator light is abnormal, there is a peculiar smell,
or the charger casing is overheated (over 176°F or 80°C), stop charging immediately,
and repair or replace the charger. During the use and storage of the charger, pay
attention to avoid foreign objects entering, especially water or other liquids, so as to
avoid a short circuit inside the charger. The charger should not be carried with the bike
often. If it is necessary to carry it, it should be placed in the toolbox after the shock
absorption treatment is done. Do not disassemble or replace the accessories in the
charger by yourself.
Ride:
This product is prohibited for use by children under 12 years old; adolescents aged
12-16 should use it under adult supervision. Do not use it until you read the
instructions carefully and understand the performance of the product; do not lend it to
people who can't manipulate the product for riding.
6
Before riding the bike, check whether the brakes are working. When you use the brake,
please activate the rear brake first, and then the front brake.
Pay attention to the brake tightness. If the brake is too loose, use an Allen key to
tighten it. Pay attention to the braking distance, it will increase when riding in rain or
snow.
Please be sure to wear a safety helmet when riding the e-bike, follow the traffic rules,
and do not drive on motorized lanes and roads with many pedestrians.
Please check the tire pressure before riding. The recommended tire pressure is
35~45PSI. When riding on downhill and non-paved roads, make sure the speed does
not exceed 15km/h (9.3mph). When using the motor, please be careful not to hit the
wheels vigorously and keep the rotating shaft lubricated. It is not allowed to ride with
more than the maximum load (265 lbs or 120kg).
After use, please do not park the bike in the building hall, evacuation stairs, or safety
exits. Please park the bike correctly in accordance with the procedures and safety
information detailed in this manual and local policies.
7
Liability statement:
After riding, please store the bike in a place without sunlight and rain, not in a
residential building; Regularly check the motor and brake; Regularly check the bike's
screws, especially those that need to be tightened, and tighten them regularly.
Recommended torque: (unit: kgf.cm) Steering handlebar screws 60-80, stem screws
175 ~ 200, seat cushion screws 175 ~ 200, wheel screws 320 ~ 450; The front and
rear wheels of the e-bike should align with the central axis of the front fork or frame;
Regularly check if there is scratches, cracks or excessive wear in tires. The inner tube
and valve should be perpendicular to the wheel hub and not crooked.
Damaged or excessively worn tires need to be replaced immediately, please find a
professional technician to replace your tires. If your tires accidentally puncture and
leak, please contact a professional technician for repair or replacement.
Maintenance:
The company reserves the right to modify and interpret the product models,
specifications, or related information mentioned in this manual; The functions of a
specific model mentioned in this user manual are only applicable to that specific
8
model; The product models, specifications, or related information mentioned in this
user manual are subject to any modification or change without prior notice; Without
the prior written permission of the company, the contents of this manual may not be
copied, modified, reproduced, transmitted or published in any form.
Please read this manual carefully before using the product, and operate in accordance
with the manual, otherwise, the company will not be responsible for product damage
or personal and property damage caused by improper use or mistakes
General Info
Assembly and Fit
Correct assembly and fit are essential elements of ensuring your bicycling safety,
performance, and comfort. Even if you have the experience, skill, and tools to
complete these essential steps before your first ride, Senada Bikes recommends
having a certified, reputable bike mechanic check your work.
NOTICE: If you do not have the experience, skills, or tools to complete assembly
and operation, Senada Bikes highly recommends having a certified, reputable bike
mechanic complete these procedures as well as any future adjustments or
9
tuning.operation
NOTICE: A critical aspect of assembling your bike by Senada Bikes is securing the
front wheel and checking the tightness of the rear wheel axle nuts. These
mechanisms may become loose or unsecured during shipment or over time. The
torque and security of all-wheel mounting hardware should be inspected upon arrival
and on a regular basis. Both wheels need to be properly secured before operating
your bike.
Mandatory Equipment and Use Locations
Before all rides, ensure you have all required and recommended safety equipment
and are following all laws pertaining to using an electric bike in your region.
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the safety of
your e-bike, void your warranty, and, in some cases, cause your e-bike to not
conform with laws pertaining to your bike.
Safety Check Before Each Ride
10
Always check the condition of your bike before you ride in addition to having
regular maintenance performed. If you are unsure of how to conduct a complete
check of the condition of your bike before every ride, you should consult a certified,
reputable bike mechanic for assistance.
Electrical System
The electrical system on your e-bike offers various levels of power assistance and
lighting for different operating conditions and user preferences. It is critical that you
familiarize yourself with all aspects of your bike’s electrical system and check to see
that it is working correctly before every ride.
The front and rear brake levers contain safety power cutoff switches, which disable
the hub motor’s assistance when applied, and both levers should be checked for
correct operation. The throttle should provide smooth acceleration when gradually
applied.
If the throttle, brake lever cutoff switches, pedal assistance, or lighting are
functioning abnormally, intermittently, or not working, please discontinue using your
e-bike immediately and contact the Senada Bikes Support Team for assistance.
Tabla de contenidos
Otros manuales de Bicicleta de SENADA
