SEM Evolution Z-7787 Manual de usuario
CONTENTS
IMPORTANT SAFETY & NOTICE
............................................................................................... E-1
SYSTEM BASICS
Location of Controls - Main Unit .......................................... E-2
Location of Controls - Remote .............................................. E-3
Power Supply AC Operation .................................................. E-3
Preparation of Remote Control .............................................. E-3
DIGITAL CLOCK
How to Set Correct Time........................................................ E-4
Automatic Power on/off Timer Function................................ E-5
GENERAL FUNCTION
Snooze Function .................................................................... E-6
Mute Function ........................................................................ E-6
Automatic Power off Sleep Function ..................................... E-6
Electronic Volume Control ..................................................... E-6
Music Equalizer ..................................................................... E-6
Text Display Mode................................................................. E-7
Play Mode Function ............................................................... E-7
Using the Audio Line in Connection ...................................... E-7
RADIO
Operation of Radio ................................................................ E-8
Manual Frequency Adjustment............................................... E-8
Automatic Frequency Adjustment .......................................... E-8
Radio Memory........................................................................ E-8
CD AUDIO
Insertion & Removal of Compact Discs ................................ E-9
Normal CD Operation ............................................................ E-9
Programming the CD-Play ..................................................... E-9
Programming for Regular CD-Audio Discs............................ E-10
CD-MP3
Programming for CD-MP3..................................................... E-11
What is MP3?......................................................................... E-12
How to Play CD-MP3 Discs................................................... E-12
USB & SD CARD
Folders on MP3-CD Discs...................................................... E-13
USB-Drive & SD-Card MP3 Playback................................... E-13
iPod OPERATION
Preparation of iPod Dock ....................................................... E-14
Operation with the iPod.......................................................... E-14
ENCODING FUNCTION
Recording to MP3 File ........................................................... E-15
Encoding from AUX-in .......................................................... E-16
SPECIFICATIONS & SET UP
Specifications ........................................................................ E-17
Set up Procedure..................................................................... E-17
Connection of Speaker Boxes................................................. E-17
WALL MOUNT SET UP
Wall Mount Set up.................................................................. E-18
E-1
IMPORTANT SAFETY & NOTICE
The lightning flash and arrowhead within the triangle is a warning sign alerting you of “dangerous
voltage” inside the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable
parts inside. Refer servicing to qualified service personnel.
CAUTION:
The exclamation point within the triangle is a warning sign alerting you of important instructions
accompanying the product.
Grounding or polarization. The precautions should be taken so that the wider blade of the AC plug
must match the slot in receptacle “wall socket”.
Do not expose to dripping or splashing liquids!
Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing liquids.
NOTE:
Caution symbols are printed on rear of unit. Please refer to instruction manual.
PLEASE NOTE:
You will find the caution rating label for this product located on the rear of the unit.
To ensure safe use of this product, please follow the advice below:
1. The apparatus and its accessory AC power adaptor should not be exposed to dripping or splashing, liquids
and no objects containers with liquids should be placed on the apparatus.
2. The on/ standby key does not isolate the product from the power supply. To completely disconnect the
product from the mains power supply you must unplug the power cord by pulling out the plug (do not
pull the cord as this may damage it and create a risk of electric shock).
3. The mains plug should not be obstructed and should be easily accessible during use.
4. Under the influence of electrostatic phenomenon, the product may malfunction and power will need to be
reset.
5. Excessive sound pressure from earphones and headphones can cause hearing loss.
6. Danger of explosion if battery is incorrectly installed. Replace only with the same or equivalent type.
7. When electrostatic discharge (ESD) occurs at the front surface (whether metal or plastic) or near any
part or any button of this unit, or at the USB port and/ or SD-card slots, there may be a possibility that
the product may stop operating and/ or shut down immediately. This is a normal condition and intended
to protect the unit and internal components against damage. In such a case, please reset the unit (by
disconnecting and reconnecting the AC-power source) to revert the unit to normal operation.
E-2
SYSTEM BASICS
LOCATION OF CONTROLS - MAIN UNIT
1. USB / SD COMPARTMENT DOOR
2. USB SOCKET
3. SD CARD SOCKET
4. BLUE BACKLIT DISPLAY
5. CD DOOR
6. STAND (FOR UNIT)
7. PLAY/ PAUSE / FM STEREO KEY
8. STOP / BAND / CLOCK SET KEY
9. VOLUME - DOWN KEY
10. VOLUME + UP KEY
11. FUNCTION KEY
12. MEM. (MEMORY) / PROG. (PROGRAM) /
P-MODE (PLAY MODE)/SLEEP KEY
13. MEM. UP / FOLDER / +10 KEY
14. BACK / TUNE DOWN KEY
15. NEXT / TUNE UP KEY
16. EQUALIZER/REC KEY
17. CD DOOR OPEN / CLOSE KEY
18. REMOTE CONTROL SENSOR
19. ON / STANDBY KEY
20. SPEAKERS (LEFT & RIGHT)
21. AMBIENT LIGHTING (ON SPEAKERS)
22. STANDS (FOR SPEAKERS)
23. HEADPHONES SOCKET
24. SUBWOOFER INPUT SOCKET
25. FM ANTENNA WIRE
26. AM-ANTENNA SOCKET
27. LEFT SPEAKER SOCKET
28. RIGHT SPEAKER SOCKET
29. DC JACK (DC 15V )
30. AUX INPUT SOCKET
31. AM ANTENNA LOOP
32. iPod DOCKING PLATFORM INPUT
SOCKET (UNDERNEATH OF UNIT)
33. POWER AND AUDIO SOURCE
INDICATOR LIGHTING
34. DOCK ADAPTOR FOR iPod
(SEVERAL DIFFERENT ADAPTORS ARE
PROVIDED)
35. STAND (FOR iPod DOCKING PLATFORM)
36. CAVITY FOR DOCK ADAPTOR
37. iPod DOCKING PLATFORM CONNECTOR
3
1
4
5
789
10
11
12
13
14 15 16 17
CONTROL KEYS
(ENLARGE SIZE):
18 19
20
22
6
23
24
25
26
27
28
29
30
31
2
21
36
37
33
34
35
32
E-3
SYSTEM BASICS
LOCATION OF CONTROLS - REMOTE
1. On/ Standby key
2. Open/ Close key
3. id3 key
4. Display key
5. Time/ Snooze key
6. EQ/ REC key
7. FUNC (Function) key
8. Band Key
9. Sleep key
10. Mem +/ Folder +/ Skip +10 key
11. Mem -/ Folder -/ Skip -10 key
12. Number keys
13. Mute key
14. Mem (Memory)/ Prog. (Program)/
P-mode (Play mode) key
15. Play/ Pause/ Mono/ Stereo key
16. Stop/ Clock set key
17. Back/ Tune down key
18. Next/ Tune Up key
19. Volume down - key
20. Volume up + key
21. Battery compartment
POWER SUPPLY AC OPERATION (EXTERNALAC-DC POWER ADAPTOR)
- This set is equipped with a “DC-Jack” capable of acceptingAC-adaptors
with a rating of DC = 15V, 3A, and with a plug with the following
polarities as shown (center positive) :
- Please use only the supplied AC-adaptor to operate the unit.
Use of other adaptors may damage the unit or cause it to malfunction.
- Plug the tail end of the AC-adaptor into the DC-jack (socket) on the side of the main unit.
- Insert the plug the AC-adaptor into the wall AC socket.
- Press the “ON/ STANDBY” key to switch on the unit.
- This unit is designed to operate without ever being totally powered “OFF”.
It will either be “on” or in “standby mode”.
- In standby mode, the blue back-light of the digital display will be dimmed but the display
will show the current time (clock function).
- Anytime during standby mode, you can switch “on” the unit by pressing the “ON/
STANDBY” key (on remote control or front panel of the main unit).
- Save energy by switching the system to “standby” mode.
PREPARATION OF REMOTE CONTROL
- Remove (gently pull out) the plastic “tab” from the battery compartment at the rear of the
remote control.
- Test the remote control by pressing the (ON/ STANDBY) key to check that the unit
switches on properly using the remote control.
15
16
17
19
18
20
21
1
7
8
9
10
11
2
3
4
5
6
13 14
12
-
+
E-4
DIGITAL CLOCK
HOW TO SET CORRECT TIME
- The set has a built-in digital clock, which is displayed in 2 situations:
(1)When the set is in “standby mode”. (the display will automatically always show the
current time).
(2)When the set is in “on mode” (the blue light of the display is “ON” in this mode, to
indicate that the set is powered “on”). In this situation the LCD display normally does
not automatically show the current time. But you can press the “DISPLAY” key (on
remote control) at any time to see the current time. And press again to switch back the
display to the play information.
Switch unit to “Stand-by” mode (display light = DIMMED)
Press & hold CLOCK SET for 3 seconds
Display shows 12 hour or 24 hour (flashing)
Press (NEXT) or (BACK) to select 12-hour or 24-hour clock
display system & press CLOCK SET to confirm your selection
Press (NEXT) or (BACK) repeatedly to set the correct hour
in the display & press CLOCK SET to confirm
Press (NEXT) or (BACK) repeatedly to set the correct
Minute in the display & press CLOCK SET to confirm
Correct time is now set & will be shown in the display.
*IMPORTANT: During the time setting procedure, whenever any part of the display
is FLASHING (HH or MM) it means that the set is waiting for you to adjust the time.
However if no key is pressed within 5 seconds, the set will return to its normal
(previous) operating mode.
E-5
DIGITAL CLOCK
AUTOMATIC POWER ON/OFF TIMER FUNCTION
- This set has a timer function to enable you to program the unit to automatically switch
“ON” or “OFF” at preset times. This is useful as a morning alarm clock :
Note:
- This timer function only works after the clock has been set.
- The TIMER key is only on the remote control.
HOW TO SET TIMER
1. Press and hold TIMER key for 2 seconds.
The symbol appears in the display.
2. Press next or back to adjust the hour of the desired “on” time
And then press TIMER key to confirm.
3. Press next or back to adjust the minutes of the desired “on” timeAnd then press TIMER
to confirm.
4. Now the wording in the display changes to show .
5. Press next or back to adjust the hour of the desired “off” time And then press TIMER
to confirm.
6. Press next or back to adjust the minutes of the desired “OFF” time
And then press TIMER to confirm.
7. Now the display will indicate the “wake up mode” (TUNER, CD, USB, SD).
Press next to choose the desired mode & press TIMER to confirm.
8. The display then shows the “wake up volume level” (loudness).
Press back or next to decrease or increase the volume level to be Used for the music to
be played when the timer switches on the unit at the Pre-set time.
9. Press TIMER to confirm.
10.Finally the unit will return to the normal display, except that the Symbol will be shown,
to indicate that you have programmed an on/off Alarm setting.
11. In case you wish to disable the timer, press the TIMER key once, & the symbol will
disappear.
NOTE : the automatic On/ Off timer will switch on the unit as if you have manually pressed the “On/ Off”
key. If you have selected “wake to radio”, the exact preset radio band & station will become activated when
power Switches on).
IMPORTANT
If the timer “wake up mode” is set as wake to either CD/ USB or SD , you will need
to connect the device properly as described. Otherwise, the timer will default to wake
as radio at the set time. The timer set-up mode, will time-out if there is no input for 3
seconds and return to “Standby mode”. Should the timer set-up mode time-out, the timer
setting instructions will have to be repeated for the timer To be set.
E-6
SNOOZE FUNCTION
- Whenever the timer comes on, it can be temporarily suspended for a short period of 10
minutes, by pressing the “SNOOZE” key (on remote control) once.
- The timer will then automatically come on again after the 10 minutes “SNOOZE” period
has ended.
- The procedure can be repeated for approximately an hour.
MUTE FUNCTION
- This set has a mute function to enable you to turn off the volume temporarily.
- Press the Mute key (on remote control) once, the volume will turn off and the volume
bar will flash.
- To resume the sound, simply press the Mute key again.
AUTOMATIC POWER OFF SLEEP FUNCTION
- This set has a special sleep timer function which can automatically switch off the unit.
This is useful for sleeping to music at night.
- At any time while the unit is operating, press SLEEP key (on remote control) repeatedly
to choose the automatic off time.
90
MINS 80
MINS 70
MINS 60
MINS 50
MINS 40
MINS 30
MINS 20
MINS 10
MINS OFF*
(*OFF MEANS SLEEP TIMER IS DEACTIVATED AND DISPLAY RETURNS TO
PLAYBACK INFORMATION)
ELECTRONIC VOLUME CONTROL
- This unit uses an electronic volume control (push button type).
- To increase or decrease the loudness of unit, press the volume up (+) or volume down (-)
keys respectively.
- Release the key when volume level is at the desired loudness.
- Sometimes, especially during listening to the radio, you may notice a
“CLICK-CLICK-CLICK” (repeating) sound when you are increasing or decreasing the
volume. This is a normal condition & the sound will disappear when you release the volume
key (when you reach the desired volume level).
MUSIC EQUALIZER
- Press EQ key repeatedly to choose the desired sound effect according to the music you
are listening to :
EQ OFF CLASSIC ROCK POP JAZZ
GENERAL FUNCTION
E-7
TEXT DISPLAY MODE (id3 display)
- This unit is capable of displaying the “TEXT INFORMATION” (id3 tag) of an MP3 song
on the LCD display.
- To switch on or off this function, simply press and hold the “id3” key (on remote control).
IMPORTANT
MP3 FILE NAME FORMAT
Please take care to use only regular english alphabets (a to z) & numerals (0 to 9) in
the file names of MP3 songs. Characters such as “ _ ” (underscore) & “ ” (space)
may result in the files being unreadable or inconsistently unrecognizable by the player.
PLAY MODE (P-MODE) FUNCTION
- At anytime during playback, press “MEM/ PROG/ P-MODE/ SLEEP” key on unit (or
“MEM/ PROG/ P-MODE” key on remote control) repeatedly to select the following
options:
REPEAT = To repeat the current track
REPEAT ALBUM = To repeat all songs from currently selected
folder(directory)
REPEAT ALL = To repeat all tracks (full CD)
INTRO = To “sample” all the music (about first 10 secs.
of every song will be played)
RAND = Shuffle all songs and play in “random” order.
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
- You can connect the audio output of an external device such as a MP3 player to this unit,
to listen to the sound of that device through the high quality amplifier of this music system.
- To connect the external device please use a standard stereo headphone (3.5mm to 3.5mm
plugs) cable to connect the “headphone-out or audio line-out” of the device to the aux-
input socket of this unit.
- Switch the function to “AUX” using the Function key.
- Make sure that the speakers are connected to the main unit.
- Switch on the unit and the external device (eg. MP3-PLAYER).
- Start playback of the external device and adjust the volume control of the main unit to the
desired level.
- Remember to switch off the unit when you are finished using the external device.
GENERAL FUNCTION
Otros manuales para Evolution Z-7787
1
Tabla de contenidos
