Select Engineered Systems SG2CL Manual del propietario

Manual Part #: 600SGCLPROG

Date: Mar 2019

Cellular Select Gate

User Programming Manual

Models SG2CL, SG3DMCL, SG3DMRCL

Compatible with VoLTE, 4G LTE and 3G Technologies.

Automatically Searches for Available Services.

SIM Must Be Activated for Talk (Voice) and Text (SMS) Services

VoLTE

4G LTE

3G

Hialeah, FL 33016

www.selectses.com

“Select, Don’t Settle”

Select Engineered Systems - Cellular Select Gate Programming Guide 2019_03_D

Page 1 of 30

Table of Contents

1Introduction...................................................................................................................................................................3

1.1 Cellular Select Gate (“CSG”) Models .........................................................................................................................................3

1.2 Active Sim, Cell Phone Number and Good Carrier Signal..........................................................................................................3

1.3 SMS Messages.............................................................................................................................................................................3

1.4 About This Manual......................................................................................................................................................................3

1.5 Operating CSGs Using the “SGMC” Cell Phone App - QR Code Link......................................................................................4

1.6 Downloading the SGMC App .....................................................................................................................................................4

1.6.1 Downloading the App by Scanning the QR Code..............................................................................................................4

1.6.2 Downloading the App using your Phone’s Play or App Store ...........................................................................................4

1.6.3 Downloading via the SES Website ....................................................................................................................................5

1.7 List of Unique CSG Features.......................................................................................................................................................5

2Programming Commands.............................................................................................................................................6

2.1 Command Passwords...................................................................................................................................................................7

2.1.1 Default Passwords..............................................................................................................................................................7

2.1.2 Change Password Commands............................................................................................................................................8

2.2 Commands to Add and Remove PINs and Cards/Transmitters...................................................................................................9

2.3 Commands to Add/Remove Rollover (Call Button) Phone Numbers .......................................................................................10

2.4 Commands to Allow Gate to Open on Caller ID.......................................................................................................................11

2.5 Commands to Check Status.......................................................................................................................................................12

2.6 Commands to Set Gate Relay Touch Tones and Times.............................................................................................................14

2.6.1 The Open/Close (Dual Purpose) Function .......................................................................................................................14

2.6.2 Commands to Set Open Relay Times and Default Open Times ......................................................................................15

2.6.3 Default Touch Tones and Associated Relay Functions....................................................................................................16

2.6.4 Commands to Set Gate Relay Tones (Touch Tones) .......................................................................................................17

2.6.5 Commands to Operate Gate Relays Using Access Mode.................................................................................................18

2.7 Setting up and Getting Event (or Relay Transaction) Logs.......................................................................................................19

2.7.1 Transaction Log Setup Order...........................................................................................................................................19

2.7.2 Transaction Logs - Setup Commands for SMS Phone Numbers .....................................................................................20

2.7.3 Transaction Logs –Commands to Enable and Set Limits................................................................................................21

2.7.3.1 Transaction Logs –Activation of Immediate (Real Time) Text Notifications................................................................................22

2.7.3.2 Examples of Immediate Notification Response ..............................................................................................................................22

2.7.4 Getting Transaction Logs via SMS..................................................................................................................................23

2.8 Speaker and Microphone Volume Settings ...............................................................................................................................25

2.9 Combining Multiple SMS Commands ......................................................................................................................................25

2.10 Error Responses....................................................................................................................................................................26

3Operation with Voice Calls .........................................................................................................................................27

3.1 CSG Dials Out –Visitor Requests Entry...................................................................................................................................27

3.2 Dialing into the CSG and Using the Intercom Password...........................................................................................................28

3.3 Texting to Have the CSG to Call You Back (Testing) ..............................................................................................................28

4Factory Default Values for Settings ...........................................................................................................................29

Select Engineered Systems - Cellular Select Gate Programming Guide 2019_03_D

Page 2 of 30

List of Figures

Figure 1: QR Code for SGMC Cell Phone App.........................................................................................................................................4

Figure 2: QR Code for SES Website .........................................................................................................................................................5

Figure 3: Table of CSG Programming Commands Currently Available ...................................................................................................6

Figure 4: Default Open (Energize) Relay Times .....................................................................................................................................15

Figure 5: Default Relay Control Touch Tones.........................................................................................................................................16

Figure 6: SMS Log Samples –(Left) Version SES6 –(Right) Version G7x onwards ............................................................................23

Figure 7: Table Showing Transaction Log Sources.................................................................................................................................24

Figure 8: Screenshot Example of SMS Error Response ..........................................................................................................................26

Reservation of Right to Change

At all times SES reserves the right to change, update and modify details in this

specification without liability to others.

Ownership of Intellectual Property Rights

Select Engineered Systems, Inc. (hereinafter “SES”) owns all intellectual property

contained in this document. No part of this document may be transmitted or reproduced

without the prior written consent of SES.

Select Engineered Systems - Cellular Select Gate Programming Guide 2019_03_D

Page 3 of 30

1 Introduction

1.1 Cellular Select Gate (“CSG”) Models

This manual applies only to Cellular Select Gate models, which from this point will be referred to as “CSG”. At

the time of writing, the applicable CSG models are

SG2CL

SG3DMCL

SG3DMRCL

1.2 Active Sim, Cell Phone Number and Good Carrier Signal

All instructions in this manual assume that the installation and setup for Talk (Voice) AND Text (SMS) phone

services has been carried out in accordance with the instructions in the Cellular Select Gate Installer Guide.

1.3 SMS Messages

The body text of all SMS messages MUST NOT exceed 120 characters

The Subject/Header of all SMS messages should remain empty

1.4 About This Manual

In relation to the CSG models listed above, this manual provides instructions for:

Programming a CSG using the universal “texting”protocol (SMS). Any cell phone capable of

sending text messages using SMS can be used to send these commands. (See Section 2)

*Calling a CSG from a touch-tone operated land-line phone or cell phone, initiating a two-way

conversation (Intercom Mode with a password) with the person standing in front of the CSG, and

allowing entry using a touch tone to activate a gate relay. (See section 3.1)

Using a land line phone or cell phoneto answer calls from a CSG, having a two-way

conversation (similar to Intercom mode but without a password) with the person at the CSG, and

permitting entry using a touch tone. (See section 3.2)

*Effects of Long Land Lines and Phone Quality on Generated Touch Tones

When calling a CSG from a land-line, success of touch tone functions can be affected

by the quality/length of the land-line between the phone and the CSG, and the quality

of the land-line phone being used, these conditions being outside of SES control. If in

doubt, please contact your local provider(s).

Please note that instructions for assigning dial-out number to keypad keys numbers, and adding PINs and

cards (i.e. programming with the keypad itself) are contained in the installation manual, packaged with the

CSG when shipped.

Select Engineered Systems - Cellular Select Gate Programming Guide 2019_03_D

Page 4 of 30

1.5 Operating CSGs Using the “SGMC” Cell Phone App - QR Code Link

In addition to these programming commands, SES provides a FREE easy-to-use cell phone app “SGMC”

(which stands for “Select Gate Mobile Control”) available from both the Android and iOS markets to operate

Any CSG model from their cell phones (app can be installed on any Android or iOS cell phone)

Non-cellular Select Gates unit using touch tone control (Note: for touch tone control, the app must be

installed on a GSM or 4G LTE cell phone). At the time of writing, models include SG3DM, SG3DMR,

SG3DMRN, SG2C and SG2M.

1.6 Downloading the SGMC App

1.6.1 Downloading the App by Scanning the QR Code

Scan the QR code below to link you to the app market appropriate to your cell phone.

Figure 1: QR Code for SGMC Cell Phone App

Follow the instructions at the link location to download the app.

1.6.2 Downloading the App using your Phone’s Play or App Store

You can download the app as follows from your phone:

Android

iPhone

Go to the (Google) Play Store on your phone.

How? There should be a link (icon to click) on your

phone. It may be on one of your home pages, or in

Applications. Here is an example icon:

In the store, search for “Select SGMC”then follow

the store’s app installation instructions.

Go to App Store on your phone.

How? There should be a link (icon to click) on your

phone. Here is an example icon, but there are several

other variants:

In the store, search for “Select SGMC” then follow

the store’s app installation instructions.

Select Engineered Systems - Cellular Select Gate Programming Guide 2019_03_D

Page 5 of 30

1.6.3 Downloading via the SES Website

a) Go to http://www.selectses.com/products/products/cellular-select-gate-series/

Or click the QR code below for the SES website:

Figure 2: QR Code for SES Website

b) Click on the appropriate link (Google Play for Android or App Store for iOS)

This should take you to the “SGMC SES” app.

c) Follow the store’s installation instructions

1.7 List of Unique CSG Features

Compared to SES Cellular Select Gates, competitor products have certain differences in both the commands

offered and the physical features available.

In particular, only SES Cellular Select Gates offer:

Two relays, with exactly the same functions as the non-cellular Select Gate i.e. Open/Close, Open 1

Hour and Latch Open (section 2.6)

The open time for each relay can be set independently (section 2.6)

Touch Tones can be set for each relay independently (section 2.6)

Up to 2000 Pins and Cards (cards are read using built-in standard 26-Bit Wiegand input) (section 2.2)

Optional RF Receiver for use with Transmitters. (Transmitters are programmed as card numbers –

please see section 2.2) SG3DMRCL only

Only SES Cellular Select Gates offer the ability to program up to 10-phone-numbers by using the

keypad. These phone numbers can be dialed simply by pressing a single keypad digit 0-9 followed by

the Call button (please see “Cellular Select Gate Keypad Programming” in the separate document

Cellular Select Gate Installer Guide)

Select Engineered Systems - Cellular Select Gate Programming Guide 2019_03_D

Page 6 of 30

2 Programming Commands

SMS programming commands allow users to change, add and remove features such as card and pin numbers.

The following table lists SMS programming commands currently available for the Cellular Select Gate (CSG):

SMS Programming Commands By Function

Commands

Description

Section

Change Passwords

These commands allow users to set their own passwords for

administration of the unit.

2.1.2

Add/Remove PINS

Add or remove PINs (must be 4 digits, range 0001 to 9999). PINs are

entered into the CSG keypad to operate a gate relay.

2.2

Add/Remove

Cards/Transmitters

Add or remove card or transmitter numbers: these numbers are 8 digits

and consist of a 3 digit site code (001 to 255) + 5-digit number (00001 to

65534). Cards can be swiped or transmitters clicked to operate a specified

gate relay.

2.2

Add/Remove a Call

Rollover (Call

Button) Phone

Number; Set Ringing

Time Before

Rollover

Add or remove a number dialed by the unit when a visitor solely pushes

the Call button. Up to three numbers can be stored for “rollover” dialing

so that when a dialed number does not answer, the next number is dialed;

set the time allowed for a dialed number to ring before rolling over to the

next number; set the Call time allowed for a connected call to continue

before hanging up (the Call time also applies to Intercom mode)

2.3

Add/Remove a Caller

ID to Open a Gate

Add or remove a phone number whose caller ID will be used to activate a

gate relay. Once the number has been added, the owner of the phone

number simply places a normal voice call to the unit. The unit then

operates the gate relay without answering the call.

2.4

Status Request

Allows an installer/user to check the signal strength of the carrier service

as detected by the CSG, current status of relays and a list of stored PINS

and Cards (for Version 6 onwards, also reports the firmware version)

2.5

Set Relay Times

Sets the time for which a relay is open when not latched

2.6.3

Set Gate Relay

Control Tones

Sets the tones used for opening/closing, 1 hour latch and indefinite latch

for relays 1 and 2

2.6.4

Send Access Mode

Commands to

Operate Relays

Sends the commands used for opening/closing, 1 hour latch and indefinite

latch for relays 1 and 2

2.6.5

Setup and Get Event

Logs

Sets up a cell phone number (capable of receiving SMS text messages) for

events that operate gate relays

2.7

Volume Commands

Provides commands to set microphone and speaker volumes

2.8

Figure 3: Table of CSG Programming Commands Currently Available

The command formats for each are defined in the following subsections.

Select Engineered Systems - Cellular Select Gate Programming Guide 2019_03_D

Page 7 of 30

2.1 Command Passwords

Text (SMS) commands for the Cellular Select Gate are divided into three different functional groups, each

having its own 4-digit password:

The Programming Password is used when programming the unit

The Access Password is used when sending a text message to gain entry to the property

The Intercom Password is only used during voice communications with the unit when a user calls the

CSG from his/her touch-tone phone. Entering the Intercom password allows the caller to enter into a two

way conversation with the person at the CSG and also allows the caller to open a gate by pressing a

keypad number using a touch on their cell phone.

2.1.1 Default Passwords

The table below shows the default factory passwords for the Cellular Select Gates when shipped:

Default Cellular Select Gate Passwords

Text (SMS) Functional Group

Factory Password

Access

5678

Programming

1234

Intercom

1212

NOTE –Please Change Passwords From Their Default Settings

It is highly recommended that you change the passwords from the default passwords.

The default passwords are universally known and if left unchanged anyone can

program your unit for their own purposes.

NOTE –Please Keep Records of Password Changes

It is highly recommended that you record any password changes you make. Once

changed, the factory CANNOT recover old passwords. Instead, a full reset would

be required, which will also delete all phone, card and pin numbers and other user data.

Select Engineered Systems - Cellular Select Gate Programming Guide 2019_03_D

Page 8 of 30

2.1.2 Change Password Commands

Change Password Commands

All commands define the existing programming password as “PPPP”. Wherever

“PPPP” occurs, substitute your own programming password e.g. the examples use

factory default “1234”.

Command Name

Command Text

Text (SMS)

Response

Change1

Programming

Password

*12*PPPP#01NNNN#

PPPP= Existing 4-digit programming password

01 = Command for Change Programming

Password

NNNN = New Programming Password (4 digits,

0-9)

Example: Change Programming password to

4239:

Full Text = *12*1234#014239#

Accepted:

“OK”

Not

Accepted:

Error response

(see Sec. 2.10,

Fig 8)

Change1

Access

Password

*12*PPPP02AAAA#

PPPP= Existing 4-digit programming password

02 = Command for Change Access Password

AAAA = New Access Password (4 digits, 0-9)

Example: Change Access password to 7865:

Full Text = *12*1234#027865#

Accepted:

“OK”

Not

Accepted:

Error response

(see Sec. 2.10,

Fig 8)

Change1Intercom

Password

*12*PPPP#03IIII#

PPPP= Existing 4-digit programming password

03 = Command for Change Intercom Password

IIII = New Intercom Password (4 digits, 0-9)

Example: Change the Intercom Password to

5523:

Full Text = *12*1234#035523#

Accepted:

“OK”

Not

Accepted:

Error response

(see Sec. 2.10,

Fig 8)

1 Changing Passwords

When making changes to password using one of the above instructions, the user should

not attempt to use the new password until the OK response is received from the

Cellular Select Gate, otherwise the Cellular Select Gate will return an error for

commands containing the new password.

Select Engineered Systems - Cellular Select Gate Programming Guide 2019_03_D

Page 9 of 30

2.2 Commands to Add and Remove PINs and Cards/Transmitters

Commands to Add and Remove PIN and Card/Transmitter Numbers

All commands define the existing programming password as “PPPP”. Wherever “PPPP” occurs,

substitute your own programming password e.g. the examples use factory default “1234”.

Command

Command Text

Text (SMS)

Response

2 Add PIN

Pins are entered

from keypad once

programmed.

Only one relay

can be set per

PIN.

*12*PPPP#87Rnnnn#

87 = Command to add PIN

R = 1 or 2 (for Relay 1 or Relay 2)

nnnn = PIN: Must be 4 digits, 0001-9999

Accepted: “OK”

Not Accepted:

Error response

(see Sec. 2.10,

Fig 8)

Example: Add PIN 0033 to trigger relay 1when the PIN is entered

from the keypad

Text = *12*1234#8710033#

2 Remove PIN

Command must

also reference the

relay that was

assigned to the

PIN.

*12*PPPP#88Rnnnn#

88 = Command to remove PIN

R= 1 or 2 (for Relay 1 or Relay 2)

nnnn = PIN: Must be 4 digits, 0001-9999

Accepted: “OK”

Not Accepted:

Error response

(see Sec. 2.10,

Fig 8)

Example: Remove PIN 0033 to prevent keypad access with that PIN;

its trigger relay was 1:

Text = *12*1234#8810033#

2 Add a Card or

Transmitter

Number

Only one relay

can be set per

card/transmitter.

*12*PPPP#87RsssCCCCC#

87 = Add Command

R= 1 or 2 (for Relay 1 or Relay 2)

sssCCCCC = 3 digit site code (001-255) followed

by 5 digit card number (00001 to 65534)

Accepted: “OK”

Not Accepted:

Error response

(see Sec. 2.10,

Fig 8)

Example: Add card/clicker 00543527 to operate relay 2when the

Card or transmitter is presented:

Text = *12*1234#87200543527#

2 Remove a

Card or

Transmitter

number

Command must

also reference the

relay assigned to

the card or

transmitter.

*12*PPPP#88RsssCCCCC#

88 = Command to remove card/transmitter

R= 1 or 2 (for Relay 1 or Relay 2)

sssCCCCC = 3 digit site code (001-255) followed

by 5 digit card number (00001 to 65534)

Accepted: “OK”

Not Accepted:

Error response

(see Sec. 2.10,

Fig 8)

Example: Remove card/clicker 00543527 to prevent continued

access with that card or transmitter; its trigger relay was 2:

Text = *12*1234#88200543527#

2 Commands for Adding/Removing PINs and Cards/Transmitters

Internally to the Cellular Select Gate, the commands for adding/deleting (commands 87 and 88

respectively) PINs and Card/Transmitter numbers are identical. However, treatment of PINs

and cards/transmitters must be different. This is because PINs are limited to 4-digits, entered

using a keypad, and cards/transmitters require a card reader or “clicker”, and use a 3-digit site

code with a 5-digit card number.

Otros manuales para SG2CL

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Select Engineered Systems

Select Engineered Systems

Select Engineered Systems TEC Series Manual de usuario

Select Engineered Systems

Select Engineered Systems SAT3 Instrucciones de uso

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario