Seiko V657 Manual de usuario
English
2
You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. V657. For best results,
please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz
Watch. Please keep this manual handy for ready reference.
Sie sind jetzt Besitzer einer SEIKO Analog-Quarzuhr Kal. V657. Bitte lesen Sie diese Bedienungsan-
leitung vor Verwendung der Uhr sorgfältig durch und heben Sie sie gut auf.
Vous voici l’heureux propriétaire d’une montre quartz analogique SEIKO Cal. V657. Pour obtenir
d’excellentes performances de cet article SEIKO, veuillez lire attentivement cette brochure que
vous conserverez pour toute référence ultérieure.
Siete ora in possesso di un orologio SEIKO Analogico al Quarzo Cal. V657. Per ottenere i migliori
possibili risultati dal Vostro orologio, leggere attentamente le istruzioni di questo manuale prima
di utilizzare il Vostro orologio SEIKO analogico al quarzo. Conservare poi il manuale stesso per
ogni qualsiasi eventuale futuro riferimento.
Enhorabuena por su adquisición de un reloj SEIKO analógico de cuarzo Cal. V657. Para óptimo
resultado, lea detenidamente las instrucciones de este folleto antes de usar el reloj. Guarde este
manual para consulta posterior.
Você pode sentir-se orgulhoso de possuir um Relógio SEIKO Quartz Análogo Cal. V657. Para obter
os melhores resultados, leia atentamente as instruções contidas neste opúsculo antes de usar o
seu Relógio SEIKO Quartz Análogo. Queira conservar este manual para referências futuras.
V657
English
3
ENGLISH
CONTENTS
Page
ADJUSTING THE HAND POSITION ............................................................................ 5
TIME/CALENDAR SETTING ........................................................................................ 6
STOPWATCH .............................................................................................................. 7
TACHYMETER ............................................................................................................ 9
NOTES ON USING THE WATCH ................................................................................ 11
BATTERY CHANGE ..................................................................................................... 13
SPECIFICATIONS ........................................................................................................ 15
✩
For the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR
WATCH” in the attached Worldwide Guarantee and Instruction Booklet.
English
4
CAL. V657
STOPWATCH
●Three small STOPWATCH hands
●Measures up to 60 minutes in 1/10 second
increments.
●Split time measurement
●Tachymeter function (for models with
tachymeter scale on the dial)
●Hour, minute and second hands and date
TIME/CALENDAR
6
English
5
ADJUSTING THE HAND POSITION
●Before setting the time, be sure to check that the STOPWATCH hands are in “0” position when
the stopwatch is reset. (For resetting the stopwatch, see “STOPWATCH”)
●If any of the STOPWATCH hands does not return to “0” position, follow the procedure
below.
A
STOPWATCH
minute hand
STOPWATCH
1/10 second hand
STOPWATCH second hand
B
➠
➠
CROWN
Pull out to second click.
▼
APress repeatedly to reset STOP-
WATCH 1/10 second hand to “0”
position.
▼Press repeatedly to reset STOP-
WATCH second and minute
hands to “0” position.
B
▼
CROWN
Push back in to normal position.
* Hands move quickly if the respective buttons are
kept pressed.
English
6
CROWN
Pull out to first click and turn clock-
wise until the previous day’s date
appears.
▼
Pull out to second click when Second
hand is at the 12 o’clock position.
▼
Turn clockwise until the desired date
appears.
▼
Set Hour and Minute hands.
▼
Push back in to normal position in
accordance with a time signal.
TIME/CALENDAR SETTING
Date
Minute hand
6
Second hand
Hour hand
➠➠
➠
English
7
STOPWATCH
●The measured time is indicated by small STOPWATCH hands that move independently of
the center hands.
HOW TO READ THE HANDS
STOPWATCH 1/10 second hand
STOPWATCH second hand
STOPWATCH minute hand
●Ex. : 15 minutes and 10.6 seconds
●Movement of STOPWATCH 1/10 second hand
• After the measurement exceeds 1 minute, the STOPWATCH 1/10 second
hand stays at the “0” position while the stopwatch is counting.
• When the measurement is stopped or split time is being measured, it
indicates the 1/10 seconds measured.
English
8
STOPWATCH OPERATION
A
B
Start / Stop / Restart
Reset / Split / Split release
Standard measurement
A
START
A
STOP
▼
▼
B
RESET
Accumulated elapsed time measurement
A
START
A
STOP
▼
▼
A
RESTART
B
RESET
▼
A
STOP
▼
• • • •
* Restart and stop
of the stopwatch
can be repeated
by pressing
button A.
Split time measurement
A
START
B
SPLIT
▼
▼
B
SPLIT
RELEASE
B
RESET
▼
A
STOP
▼
• • • •
* Measurement
and release of
split time can be
repeated by
pressing button B.
English
9
TACHYMETER
[for models with tachymeter scale on the dial]
To measure the hourly average speed of a vehicle:
Tachymeter scale: 90
STOPWATCH second hand:
40 seconds
●Tachymeter scale can only be used to measure average
speed when time required is up to 60 seconds.
If the measuring distance is extended to 2 km or miles or
shortened to 0.5 km or miles and STOPWATCH second
hand indicates “90” on the tachymeter scale:
“90” (tachymeter scale figure) x 2 (km or miles)
= 180 km/h or mph
“90” (tachymeter scale figure) x 0.5 (km or miles)
= 45 km/h or mph
●
Ex. : “90” (tachymeter scale figure)
x 1 (km or mile) = 90 km/h or
mile/h
1Use the stopwatch to determine how many
seconds it takes to go 1 km or 1 mile.
2Locate the second marker on the main dial
which corresponds to the number of seconds
measured. The number on the tachymeter
scale indicates the average speed per hour.
* For the models with the tachymeter scale around the
small dial at the 6 o’clock position, read the tachymeter
scale which the STOPWATCH second hand points to.
English
10
To measure the hourly rate of operation:
1Use the stopwatch to measure the time re-
quired to complete 1 job.
2Locate the second marker on the main dial
which corresponds to the number of seconds
measured. The number on the tachymeter
scale indicates the average number of jobs
accomplished in one hour.
* For the models with the tachymeter scale around the
small dial at the 6 o’clock position, read the tachymeter
scale which the STOPWATCH second hand points to.
●
Ex. : “180” (tachymeter scale figure)
x 1 job = 180 jobs/hour
STOPWATCH second hand:
20 seconds
Tachymeter scale: 180
●If 15 jobs are completed in 20 seconds:
“180” (tachymeter scale figure) x 15 jobs
= 2700 jobs/hour
Otros manuales para V657
2
Tabla de contenidos
Otros manuales de Mirar de Seiko
Seiko
Seiko NH35 Manual de usuario
Seiko
Seiko C-18 Manual de usuario
Seiko
Seiko H357 Manual de usuario
Seiko
Seiko 8J55 Manual de usuario
Seiko
Seiko 7R68 Manual de usuario
Seiko
Seiko 7T84 Manual de usuario
Seiko
Seiko W073 Manual de usuario
Seiko
Seiko SRG019P2 Manual de usuario
Seiko
Seiko 8R48A Guía de inicio rápido
Seiko
Seiko 6S37 Manual de usuario
Seiko
Seiko S056 Manual de usuario
Seiko
Seiko H-1 Manual de usuario
Seiko
Seiko 6R24A Guía de inicio rápido
Seiko
Seiko 5M42A Guía de inicio rápido
Seiko
Seiko 5R66 Manual de usuario
Seiko
Seiko ASTRON Manual de usuario
Seiko
Seiko V693A Manual del instalador
Seiko
Seiko Lorus R23 Series Manual de usuario
Seiko
Seiko Conceptual SWL001J Manual de usuario
Seiko
Seiko 7S25B Manual del instalador
