Seiko 7T92 Manual de usuario
INSTRUCTIONS (P. 3)
BEDIENUNGSANLEITUNG (S. 17)
INSTRUCTIONS (P. 31)
ISTRUZIONI (P. 45)
INSTRUCCIONES (P. 60)
INSTRUÇÕES (P. 74)
用法説明 (88 頁)
Cal. 7T92
2
English
You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 7T92. For best results,
please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz
Watch. Please keep this manual handy for ready reference.
Sie sind jetzt Besitzer einer SEIKO Analog-Quarzuhr Kal. 7T92. Bitte lesen Sie diese Bedienungsan-
leitung vor Verwendung der Uhr sorgfältig durch und heben Sie sie gut auf.
Vous voici l’heureux propriétaire d’une montre quartz analogique SEIKO Cal. 7T92. Pour obtenir
d’excellentes performances de cet article SEIKO, veuillez lire attentivement cette brochure que
vous conserverez pour toute référence ultérieure.
Siete ora in possesso di un orologio SEIKO Analogico al Quarzo Cal. 7T92. Per ottenere i migliori
possibili risultati dal Vostro orologio, leggere attentamente le istruzioni di questo manuale prima
di utilizzare il Vostro orologio SEIKO analogico al quarzo. Conservare poi il manuale stesso per
ogni qualsiasi eventuale futuro riferimento.
Enhorabuena por su adquisición de un reloj SEIKO analógico de cuarzo Cal. 7T92. Para óptimo
resultado, lea detenidamente las instrucciones de este folleto antes de usar el reloj. Guarde este
manual para consulta posterior.
Você pode sentir-se orgulhoso de possuir um Relógio SEIKO Quartz Análogo Cal. 7T92. Para obter
os melhores resultados, leia atentamente as instruções contidas neste opúsculo antes de usar o
seu Relógio SEIKO Quartz Análogo. Queira conservar este manual para referências futuras.
3
English
ENGLISH
CONTENTS
Page
SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION ........ 5
SETTING THE DATE ................................................................................................ 8
STOPWATCH ........................................................................................................... 9
TACHYMETER ......................................................................................................... 12
BATTERY CHANGE .................................................................................................. 14
SPECIFICATIONS ..................................................................................................... 16
✩
For the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR
WATCH” in the attached Worldwide Guarantee and Instruction Booklet.
4
English
CAL. 7T92
A
B
a b c
CROWN
Hour hand
Minute hand
STOPWATCH 1/20-second hand
■TIME/CALENDAR
■STOPWATCH
Measures up to 12 hours in 1/20 second increments.
Split time measurement is possible.
Small second hand
Date
a: Normal position
b: First click
c: Second click
STOPWATCH hour hand STOPWATCH second hand
STOPWATCH minute hand
5
English
SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION
6
Minute hand
Hour hand
CROWN Pull out to second click when the second hand is at the 12 o’clock position.
CROWN Turn to set the hour and
minute hands.
Small
second
hand
1. TIME SETTING
●This watch is so designed that the following are all made with the crown at the second click
position:
1) time setting
2) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust the time. If
needed, the position of the stopwatch hands should also be adjusted then.
6
English
1. When the stopwatch is or has been measuring or is stopped, if the crown is pulled out to the second
click, it will automatically reset the STOPWATCH hands to “0”.
2. If is recommended that the hands be set to the time a few minutes ahead of the current time, taking
into consideration the time required to adjust the STOPWATCH hand position if necessary.
3. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so designed
that the date changes once in 24 hours.
4. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn
it back to the exact minute.
2. STOPWATCH HAND POSITION ADJUSTMENT
✩If the STOPWATCH hands are not in the “0” position, follow the procedure below to set them
to the “0” position.
B
STOPWATCH second hand
STOPWATCH hour hand
6
STOPWATCH 1/20-second hand
A
STOPWATCH minute hand
7
English
Press for 2 seconds to select STOPWATCH hand(s) to be adjusted.
STOPWATCH
second hand
▲
▲
▲
CROWN
●Selection of the hand(s) can be made in the following order by
pressing button for 2 seconds.
A
STOPWATCH
1/20-second hand STOPWATCH
hour and minute
hands
* The selected hand(s) turn(s) a full circule.
Press repeatedly to set the selected STOPWATCH hand(s) to the “0”
position.
* The hand(s) move(s) quickly if button B is kept pressed.
* After all the adjustments are completed, check that the hour and minute hands for time
display indicate the current time.
▼
B
▼
▼
A
Push back into normal position in accordance with a time signal.
8
English
●Before setting the date, be sure to set the main time.
6
➠
➠
CROWN
Pull out to first click.
▼
Turn clockwise until the desired date
appears.
▼
Push back in to normal position.
Date
1. It is necessary to adjust the date at the end of February and 30-day months.
2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly.
SETTING THE DATE
9
English
STOPWATCH
●The stopwatch can measure up to 12 hours in 1/20-second increments.
●When the measurement reaches 12 hours, the stopwatch automatically stops counting.
A
B
STOPWATCH second hand
STOPWATCH second hand
[ Ex.: 2 hours, 30 minutes and 10.85 seconds ]
Movement of STOPWATCH 1/20-second hand
●After the stopwatch is started, STOPWATCH 1/20-second hand moves for about 10
minutes and automatically stops at the “0” position.
●When the measurement is stopped or split time is measured, it moves to indicate the
elapsed 1/20 seconds.
STOPWATCH 1-20-second hand
STOPWATCH hour hand
10
English
Accumulated elapsed time measurement
A
START
A
STOP RESTART
▼
▼
A
STOP RESET
B
▼
A
○○○○
▼
* Restart and stop of the stopwatch can be repeated by pressing button A.
Standard measurement
A A B
▼
▼
START STOP RESET
●After the stopwatch is restarted or split time is released, STOPWATCH 1/20-second
hand moves for about 10 minutes and stops automatically.
●In the same manner, if the stopwatch is stopped and restarted repeatedly or split time
is measured and released repeatedly, STOPWATCH 1/20-second hand moves for
about 10 minutes and stops automatically.
✩Before using the stopwatch, be sure to check that the crown is set at the normal position and
that the STOPWATCH hands are reset to the “0” position.
* If the STOPWATCH hands do not return to the “0” position when the stopwatch is reset to “0”, follow
the procedure in “SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION”.
Otros manuales para 7T92
1
Tabla de contenidos
Otros manuales de Mirar de Seiko
Seiko
Seiko STOPWATCH S143 Manual de usuario
Seiko
Seiko Cal. 4T57 Manual de usuario
Seiko
Seiko Presage SPB305J Manual de usuario
Seiko
Seiko KINETIC 7D56 Manual de usuario
Seiko
Seiko VD 50 B Manual de usuario
Seiko
Seiko 5Y75 Manual de usuario
Seiko
Seiko 8B92 Manual de usuario
Seiko
Seiko H-1 Manual de usuario
Seiko
Seiko SRPH29K Manual de usuario
Seiko
Seiko 7B26 Manual de usuario
Seiko
Seiko 5M62 Manual de usuario
Seiko
Seiko W851 Manual de usuario
Seiko
Seiko 4R57 Manual de usuario
Seiko
Seiko 7T86 Manual de usuario
Seiko
Seiko SFJ001P Manual de usuario
Seiko
Seiko Astron 7X52 Manual de instrucciones
Seiko
Seiko Cal. V198 Manual de usuario
Seiko
Seiko Data-2000 Manual de usuario
Seiko
Seiko Prospex S23629J Manual de usuario
Seiko
Seiko 5M54A Guía de inicio rápido
