Seiko MPU-L465 Series Manual de usuario

USER’S GUIDE

Thermal Printer

MPU-L465

Read this manual carefully before use.

Keep this maual in a place where it can be

accessed quickly.

Seiko Instruments Inc.

MPU-L465 THERMAL PRINTER USER’S GUIDE

Document Number: U00078687600

First Edition: April 2003

The information contained herein is the property of SII and shall not be reproduced

in whole or in part without prior written approval of SII.

SII reserves the right to make changes in the specifications and materials contained

herein without notice and shall not be responsible for any damages (including

consequential) caused by reliance on the materials presented, including but not

limited to typographical, arithmetic, and listing errors.

is a trademark of Seiko Instruments Inc.

Applicable EC Directives and Standards

Product: Thermal Printer DPU-3445-10A

Directives Title

89/336/EEC EC Electromagnetic Compatibility Directive

Standards

EMI: EN50081-1/1997

EN55022/1994+Amd.1/1995 class B, EN61000-3-2/1995

EMS: EN50082-1/1997

EN61000-4-2/1995, EN61000-4-3/1996, ENV50204/1995,

EN61000-4-4/1995, EN61000-4-5/1995,

EN61000-4-6/1996, EN61000-4-8/1993

Product : AC Adapter PW-3009-W2

Directives Title

89/336/EEC EC Electromagnetic Compatibility Directive

73/23/EEC EC Low Voltage Directive

Standards

EMI: EN55022/1995 class B

EMS: EN50082-1/1992

IEC801-2/1984, IEC801-3/1984, IEC801-4/1988,

IEC1000-4-5/1995, IEC1000-4-6/1996, IEC1000-4-11/1993

LVD: EN60950/1992 +Amd.1 +Amd.2 +Amd.3

IEC950/1991+Amd.1/1992+Amd.2/1993+Amd.3/1995+Amd.4/1996

Product: Battery Charger BC-3008-W1

Directives Title

89/336/EEC EC Electromagnetic Compatibility Directive

73/23/EEC EC Low Voltage Directive

Standards

EMI: EN50081-1, EN55022/1995 class B, EN61000-3-2/1995, EN61000-3-3/1995

EMS: EN50082-1, IEC801-2/1984, IEC801-3/1984, IEC801-4/1988

LVD: EN60950 +Amd.1 +Amd.2, IEC950/1991 +Amd.1/1992 +Amd.2/1993

Federal Communications Commission (FCC) compliance statement

Your printer has been tested and found to comply with the limits for a Class B digital device pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. Your printer generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation.

It can be determined whether your printer is causing interference by turning it off. If the interference

stops, your printer might cause it.

If your printer does cause interference, try to correct the interference by one or more of the following

measures:

- Reorient or relocate the radio or television antenna.

- Increase the separation between your printer and the radio or television.

- Connect your printer to an outlet on a different circuit from the radio or television.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes in this certified device could void your legal right to operate it.

Industry Canada (IC) compliance statement

This device complies with the requirements of RSS-210. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

- 1-

INTRODUCTION

This manual describes the functions of the MPU-L465 thermal printer.

Read through the safety and operating precautions on pages 2 to 15 carefully before

using the printer. Also read the instruction manuals of the optional devices that you

purchased together with the printer.

Table of Contents

SAFETY PRECAUTIONS...........................................................................2

OPERATING PRECAUTIONS...................................................................13

1. PREPARATION................................................................................15

2. NAMES OF PARTS..........................................................................16

3. POWER CONNECTING...................................................................18

4. PAPER SETUP ................................................................................21

5. ATTACHING AND DETACHING THE BELT CLIP AND STRAP.......24

6. TEST PRINTING..............................................................................25

7. FUNCTION SETTINGS....................................................................26

8. CONNECTING TO THE HOST COMPUTER ...................................34

9. CHARGING THE BATTERY PACK..................................................36

10. THERMAL HEAD/PLATEN ROLLER MAINTENANCE.....................38

11. TROUBLESCHOOTING...................................................................39

12. SPECIFICATIONS............................................................................40

13. OPTIONAL UNITS AND CONSUMABLES.......................................41

For more details, please ask your dealer for a copy of the MPU-L465 Technical

Reference.

- 2-

SAFETY PRECAUTIONS

The following symbols are used in this manual in order to make proper use of the

printer and avoid incidental damages.

Follow the instructions marked with each individual symbol.

WARNING Failure to follow the guidelines marked with this

symbol could result in severe personal injury or

death.

CAUTION Failure to follow the guidelines marked with this

symbol could result in minor personal injury or

product and/or peripheral damage.

Symbol Examples

The symbol indicates caution (including danger and warning).

This example indicates warning or caution.

The symbol indicates prohibition.

This example indicates prohibition of disassembling.

The symbol indicates requirements or what must be done.

This example asks you to unplug the power cable.

- 3-

WARNING

If you find any of the following abnormalities in the printer, power off the

printer, unplug the AC cable, and remove the battery pack from the printer.

♦When an unusual state was not recovered to the normal’s.

♦When the printer gave out a nasty smell or smoke, or emitted

abnormal sound.

♦When metallic powders, water or other foreign substances entered the

printer.

♦When the printer case was broken.

If not, it might cause a fire or an electricshock. Please ask your dealer for

repair.

Never put metallic powders, water and other foreign substances into the

printer from its opening.

If not, it might cause a fire or an electricshock.

Never disassemble or remodel the printer. Do not try to repair the printer

yourself.

If not, it might cause a fire, accident or failure.

Do not use other power supplies than our specified AC adapter and battery

pack.

If not, there is fear of a burst, ignition, or generation of heat that might

cause a fire or an accident.

Power off the printer, when you detach and attach the battery pack from

and to the printer.

If not, it might cause an electricshock.

- 4-

CAUTION

When not in use for long periods of time, power off the printer, unplug theAC

cable, and remove the battery pack from the printer.

If not, it might cause a fire or an electricshock.

When you clean the printer, power off the printer, unplug AC cable, and

remove the battery pack from the printer.

If not, it might cause a fire or an electricshock.

Keep the printer away from children.

If not, it might cause injury.

Keep the printer awayfrom direct sun and high temperature. If not, it might

cause a fire or a failure.

Keep the printer away from high humidity and dust.

If not, it might cause a fire or a failure.

While using the printer, never cover cloth etc. over it.

If not, it might cause a fire or a failure.

Install the printer in a vibration-free place.

Keep the printer away from unstable, shaky, unsteady and slanting

environment.

If not, it might cause an injury or a failure.

The thermal printhead might reach a high temperature just after printing.

Never touch the printhead. Remove paper jam and clean the printhead

after making sure that the printhead has cooled down.

If not, it might cause an injury.

The printer is designed so that you can directly touch the thermal head,the

paper sensor, and the platen roller due to improvement of paper insertion

mechanism. Never touch those directly.

If not, it might cause an injury or a failure.

Do not touch the cutter.

If not, it might cause an injury.

When attaching the battery pack in the printer, secure the battery cover.

If not, the batterycover is turned over, the battery jumps out, and an injury or a

failure may happen.

- 5-

When AC adapter is used

WARNING

If you find any of the following abnormalities in the AC adapter, unplug the

AC cable.

♦When the AC adapter differs from usual [ smoke has come out from the

AC adapter / strange smell comes out from the AC adapter / the AC

adapter is unusually hot]

♦When the printer case was broken.

It becomes the cause of a fire and an electricshock. Request repair from a

selling agency.

Do not disassemble or remodel the AC adapter. It becomes the cause of a

fire, an accident, and failure.

Do not use other AC code than the our specified one.

It becomes the cause of a fire, an accident, and failure.

Do not use AC adapter on any voltage other than the specified power

supply voltage.

It becomes the cause of a fire, an accident, and failure.

Do not touch the metal part of AC adapter or the connector, to avoid

short-circuit absolutely.

It becomes the cause of a fire, an accident, and failure.

Do not place the AC adapter at the place which possibly moisten or water

it.It becomes the cause of a fire, an accident, and failure.

- 6-

CAUTION

Pull out AC plug from a wall socket in the case of care of the AC adapter.

It becomes the cause of an electricshock.

Put the AC adapter on the place which infants' hand does not reach.

It becomes causes, such as an injury.

Do not put the AC adapter on the place where direct sun light hits, and the

place which becomes high temperature. It becomes the cause of a fire and

failure.

Do not put the AC adapter on a place where is humid and dusty.

It becomes the cause of a fire and failure.

Do not touch the AC adapter by the wet hand.

It becomes the cause of an electricshock.

While using the AC adapter, do not put cloth etc. on it.

It becomes the cause of a fire and failure.

Do not put the printer on unstable places, such as a shaky palce, an

unsteady stand top, and a leaning place.

It becomes the cause of an injury or failure.

- 7-

When a battery pack is used

WARNING

When the battery pack is as follows, remove the battery pack from the

printer and stop using, and keep away from fire.



When there is a strange smell, or the battery pack is unusually hot



When the case breaks



When liquid has leaked

There is fear of liquid leakage, generation of heat,a burst,and ignition, and

it becomes the cause of a fire and an injury.

Do not disassemble, remodel, and solder the battery pack by any means.

There is fear of liquid leakage, generation of heat,a burst,and ignition, and

it becomes the cause of a fire and an injury.

Do not recharge the battery pack except by the exclusive battery charger.

There is fear of liquid leakage, generation of heat,a burst,and ignition, and

it becomes the cause of a fire and an injury.

Do not touch the metal part of the battery pack to avoid short-circuit

absolutely.

There is a fear of heat generation, a fire or an electricshock, and it

becomes the cause of a fire and an injury.

Do not throw in the battery pack into fire or do not heat it. There is fear of

liquid leakage, generation of heat, a burst, and ignition, and it becomes the

cause of a fire and an injury.

Do not recharge the battery pack in a hot place (35 °C or more) such as

under burning sun or near fire.

There is fear of liquid leakage, generation of heat,a burst,and ignition, and

it becomes the cause of a fire and an injury.

Do not give a strong shock which strikes a battery pack with a hammer,

such as stabbing with a nail, and crushing.

There is fear of liquid leakage, generation of heat,a burst,and ignition, and

it becomes the cause of a fire and an injury.

Do not put the battery pack into water, or do not put it on the place which

possibly wet.There is fear of liquid leakage, generation of heat, a burst, and

ignition, and it becomes the cause of a fire and an injury.

Tabla de contenidos

Otros manuales de Impresora de Seiko

Seiko

Seiko ColorPainter V-64S Manual de usuario

Seiko

Seiko SII DPU-S445 Manual de usuario

Seiko

Seiko TM-H6000II Manual de usuario

Seiko

Seiko SII MP-B30 Series Manual de usuario

Seiko

Seiko SII RP-F10 SERIES Manual de usuario

Seiko

Seiko DPU-H245AP-A03A-E Manual de usuario

Seiko

Seiko PRECISION FB 380 Manual de usuario

Seiko

Seiko BP-9000 Manual de usuario

Seiko

Seiko RP-F10 Series Manual de uso y cuidado

Seiko

Seiko MP-B30 Series Manual de usuario

Seiko

Seiko LTPD245D Manual de uso y cuidado

Seiko

Seiko SII RP-D10 Series Manual de usuario

Seiko

Seiko FB 390 Manual de usuario

Seiko

Seiko CT-2000 Manual de usuario

Seiko

Seiko MP-A40 SERIES Manual de usuario

Seiko

Seiko IP-7900 Manual de usuario

Seiko

Seiko DPU-3445 Manual de usuario

Seiko

Seiko MTP Series Manual de uso y cuidado

Seiko

Seiko MPU-L465-17 Manual de usuario

Seiko

Seiko RP-E10 Series Manual de usuario

Seiko

Seiko SII RP-E10 Series Manual de usuario

Seiko

Seiko Smart Label Printer SLP620 Manual de usuario

Seiko

Seiko DPU-414 Manual de usuario

Seiko

Seiko SII LTP01-245-11 Manual de uso y cuidado

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario