SEH Utnserver Pro Manual de usuario

USB Deviceserver

utnserver Pro

Quick Installation Guide

MHAB-QI-utnPro

Version: 1.0 | 2020-10

Overview

This 'Quick Installation Guide' describes the hardware installation and initial

setup of the utnserver Pro.

Table of contents 1.

Do you need assistance? Contact us!

Customers from the United States of America and Canada please contact the

North American support.

Überblick

Dieser 'Quick Installation Guide' beschreibt die Hardware-Installation und

Inbetriebnahme des utnserver Pro.

Inhaltsverzeichnis 15.

Benötigen Sie Hilfe? Kontaktieren Sie uns!

Monday to Thursday

Friday 8:00 a.m. to 4:45 p.m. and

8:00 a.m. to 3:15 p.m. (CET)

+49 (0)521 94226-44

support@seh.de

www.seh-technology.com

Monday to Friday 9:00 a.m. to 5:00 p.m. (EST/EDT)

+1-610-943-3226

support@sehtechnology.com

www.seh-technology.com

Montag–Donnerstag

Freitag 8:00–16:45 Uhr

8:00–15:15Uhr

+49 (0)521 94226-44

support@seh.de

www.seh.de

Quick Installation Guide [en] 1

Contents

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Purpose .....................................................................................................................................2

Scope of Supply .....................................................................................................................2

Technical Data.........................................................................................................................3

LED Display..............................................................................................................................4

Type Plate.................................................................................................................................4

Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Software Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

SEH Product Manager..........................................................................................................7

SEH UTN Manager .................................................................................................................8

Getting Started: SEH UTN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Starting the SEH UTN Manager ......................................................................................10

Finding the UTN Server and Assigning an IP Address............................................11

Adding the UTN Server to the Selection List.............................................................12

Connecting the USB Device to the Client...................................................................13

Configuring the UTN Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Regulatory Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Open Source Software License Disclaimer and License Texts . . . . . . . . . . . .32

2 [en] Quick Installation Guide

General Information

Purpose

The USB Deviceserver 'utnserver Pro’ makes non-network-ready USB devices

accessible via TCP/IP network.

For this purpose, the USB devices (e.g. hard disks, etc.) will be connected to the

USB ports of the utnserver Pro. Then the UTN (UTN = USB to Network)

functionality and the corresponding software tool 'SEH UTN Manager' establish

a virtual USB connection between USB device and client. The USB device can be

used as if it were connected locally.

Scope of Supply

Check the package content before getting started:

UTN server Deviceserver 'utnserver Pro'

Quick

Installation

Guide

The Quick Installation Guide provides a brief

description of the installation of the utnserver

Pro.

(This document)

Power pack External power pack

Quick Installation Guide [en] 3

Technical Data

Properties Values

Network connectorlogical:

physical: IEEE 802.3 (1000BaseT, 100BaseTX and 10BaseT)

1 × RJ-45 (STP, category 5 or better)

Device connection • 2 × USB 3.0 SuperSpeed (USB ports 1–2)

Current input • approx. 500 mA at 5 V direct current without load

• approx. 2500 mA at 5 V direct current with full

load on the USB ports

Power consumption • approx. 3 W without load

• approx. 14 W with full load on the USB ports

• approx. 26–123 kWh/year, depending on

utilization

Operating environment ambient temperature: 5–40 °C

relative humidity: 20–80 %

Dimensions width: 120 mm

height: 30 mm

depth: 84 mm

weight: 125 g (without power supply unit)

USB ports 1-2

with LED for the USB port

network connector

(RJ-45)

(at the rear side)

power supply

connector

(at the rear side)

status LED

(RGB)

activity LED

(yellow) link LED

(green)

4 [en] Quick Installation Guide

LED Display

The LEDs of the UTN server provide information about its status.

Type Plate

The type plate gives important product information, such as hardware and

certification information as well as the serial number. The serial number

contains the production date: nnn YYYY MM nnnnn.

This information helps you e.g. during maintenance and is needed for support

requests.

LED Action Color Description

Link and

Activity permanently off – There is no connection to the network.

Link permanently on green There is a connection to the network.

Activity blinks at

irregular

intervals

yellow Indicates the exchange of UTN

packets.

Status blinks 3 times

blinks 2 times

green

purple

Indicates the assignment of a Zeroconf

IP address.

Indicates the assignment of an IP

address that is not from the Zeroconf

range.

utnserver Pro operates with

elementary secure settings.

(HTTPs, no SNMPv1, restricted Control

Center access, encrypted USB

communication)

USB port

1–2 permanently off

permanently on

–

green

orange

No USB device is connected to the

respective port.

A USB device is connected to the

respective port.

The connection to the respective port

and the attached USB device is

activated.

Important:

When the device starts up, the behavior of the LEDs

differs from this description.

Quick Installation Guide [en] 5

Safety Regulations

UTN servers are network devices for use in office environments. The utnserver

Pro is designed for the integration of USB device into TCP/IP networks.

• Read the documentation and make sure that your system meets the require-

ments listed therein.

• Avoid contact with humidity or liquids.

• The device must only be connected and operated if it is in perfect condition.

• Make sure that no-one steps on or stumbles over the cables.

• If the supplied power cord cannot be used in your country, acquire an appro-

priate power cord that suits national provisions. For more information, con-

sult your retailer.

• Do not connect a telephone cable to the RJ-45 connector. The RJ-45 connec-

tor may only be connected to SELV voltages. For the connection to the RJ-45

connector only STP cabling (category 5 or better) may be used. The shielding

must fit flushly to the connector.

• Do not open the housing. Unauthorized modifications to the device can af-

fect the product certification and are forbidden.

• The device must not be directly connected to outdoor lines.

• The device must only be operated using the power pack included in the

package.

• Only use a certified USB cable (< 3 m) listed at www.usb.org.

• Electrostatic discharges (ESD) may impair device performance.

• An interruption of the supply voltage may impair device performance or

cause malfunctions.

Important:

Before starting the installation and the initial setup

procedure as well during the operation of the UTN

server, note the following safety regulations. Their

purpose is to protect yourself and others from personal

injuries, and to avoid damage to the equipment.

6 [en] Quick Installation Guide

Hardware Installation

You can directly connect up to 2 USB devices to the utnserver Pro.

1. Connect the USB device to a USB port of the UTN server.

2. Repeat step 1 if you want to connect more than one USB device.

3. Connect the network cable (RJ-45) to the UTN server.

4. Connect the power cord to the UTN server.

The UTN server boots and then is ready for use.

Important:

USB device and UTN server can be connected via a USB

cable, if required.

Only use USB cables shorter than 3 meters.

USB devices

UTN

connection

clients with software tool

'SEH UTN Manager'

UTN deviceserver

USB 3.0

network

Quick Installation Guide [en] 7

Software Installation

SEH Product Manager

The 'SEH Product Manager' is a software tool developed by SEH

Computertechnik GmbH for the administration and management of SEH

Computertechnik GmbH devices on the network.

The software is installed on all clients from which SEH Computertechnik GmbH

devices are to be administrated and managed on the network.

First, you have to download the installation file for the SEH Product Manager

from the website of SEH Computertechnik GmbH:

http://www.seh-technology.com/services/downloads/

download-deviceserver/utnserver-pro.html

System requirements:

– Windows 10, Windows Server 2012 or later

macOS 10.12.x or later

– The installation can only be carried out by users with administrative rights.

1. Start the SEH Product Manager installer.

2. Follow the installation routine.

The SEH Product Manager is installed on your client.

You can recognize the SEH Product Manager by its icon: . The program is

started with the usual methods of your operating system.

The program automatically searches for SEH Computertechnik devices on the

network after starting. For more information see the   'SEH Product

Manager Online Help'

8 [en] Quick Installation Guide

SEH UTN Manager

The 'SEH UTN Manager' is a software tool developed by SEH Computertechnik

GmbH. The SEH UTN Manager is used to establish and manage connections to

the USB devices connected to UTN servers.

The SEH UTN Manager is available in two versions:

• complete version:

has a graphical user interface and offers additional features

• minimal version:

command-line interface only

A detailed description can be found in the USB Deviceserver User Manual.

The SEH UTN Manager has to be installed on all clients that are intended to

access a USB device via the network. Different installation files are available,

depending on the operating system.

First, you have to download the installation file for the SEH UTN Manager from

the website of SEH Computertechnik GmbH:

http://www.seh-technology.com/services/downloads/

download-deviceserver/utnserver-pro.html

System requirements:

– Windows 10, Windows Server 2012 or later

OS X respectively macOS 10.9 or later

– The installation can only be carried out by users with administrative rights.

1. Start the installation file.

2. Install the complete version of the SEH UTN Manager (including graphical

user interface). To do so, follow the installation routine.

The SEH UTN Manager is installed on your client.

Important:

The SEH UTN Manager is also available for selected

Linux systems.

All information necessary for installing and using the

SEH UTN Manager in Linux environments can be found

in the USB Deviceserver User Manual Linux. The

documentation is available via the link given above.

Tabla de contenidos

Idiomas:

Otros manuales de Servidor de SEH

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

SEH utnserver Pro Manual de usuario

Manuales populares de Servidor de otras marcas