SEH HPFA-226 Manual de usuario
Fiber Adapter
HPFA-226
HPFA-1226
User Manual
MHAB-UM-HPFA-2
Version: 1.0 | 2023-04
Overview
This 'User Manual' describes the hardware installation of the HPFA-226 / HPFA-
1226.
Table of contents 1.
Do you need assistance? Contact us!
Customers from the United States of America and Canada please contact the
North American support.
Überblick
Dieses 'User Manual' (Benutzerhandbuch) beschreibt die Hardware-Installation
des HPFA-226 / HPFA-1226.
Inhaltsverzeichnis 13.
Benötigen Sie Hilfe? Kontaktieren Sie uns!
Monday to Thursday
Friday 8:00 a.m. to 4:45 p.m. and
8:00 a.m. to 3:15 p.m. (CET)
+49 (0)521 94226-44
suppor[email protected]
www.seh-technology.com
Monday to Friday 9:00 a.m. to 5:00 p.m. (EST/EDT)
+1-610-933-2088
support@sehtechnology.com
www.seh-technology.com
Montag–Donnerstag
Freitag 8:00–16:45 Uhr
8:00–15:15Uhr
+49 (0)521 94226-44
suppor[email protected]
www.seh.de
User Manual [en] 1
Table of Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Purpose .....................................................................................................................................2
Supported Printers................................................................................................................2
Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
LED Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Type Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installing the Fiber Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
General Information.............................................................................................................7
Tools You Need .......................................................................................................................8
Step 1: Prepare the printer.................................................................................................8
Step 2: Gain Access to the Printer Mainboard.............................................................8
Step 3: Mounting the Riser Card (if necessary) ..........................................................8
Step 4: Installing the Fiber Adapter ................................................................................9
Step 5: Connecting the USB Cable to the Printer Mainboard..............................11
Step 6: Reinstall Printer Mainboard Cover..................................................................11
Step 7: Connect the Fiber Adapter to the Network ................................................12
Step 8: Turn the Printer On ..............................................................................................12
Regulatory Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
2 [en] User Manual
General Information
Purpose
With the Fiber Adapter HPFA-226/HPFA-1226 a printer or multi-function printer
(MFP) manufactured by Hewlett Packard (HP) can be embedded into an existing
fiber-optic network (100BaseFX or 1000BaseSX ).
Printer respectively MFP and Fiber Adapter must be compatible; see ’Supported
Printers’ 2.
In this manual the term 'printer' is used for referring to compatible printers and
MFPs.
Supported Printers
You can find a list of supported printers at:
https://www.seh-technology.com/products/fiber-adapter.html
WARNING
Do not connect the Fiber Adapter to other printers!
User Manual [en] 3
Scope of Supply
Please check the package content before getting started:
Fiber
Adapter HPFA-226
HPFA-1226
M-Adaptor Mechanical Adapter
User
manual The User Manual describes the installation of the
HPFA-226 / HPFA-1226.
(This document)
USB cable Connector USB-C on Wire-to-Board-Connector
Screws 2 short screws (M3 × 5 mm)
2 long screws (M3 × 20 mm)
4 [en] User Manual
Technical Data
Properties Values
Printer port
logical (HPFA-226):
logical (HPFA-1226):
physical:
IEEE 802.3 (100BaseTX)
IEEE 802.3 (1000BaseT)
RJ-45
Network connection
logical (HPFA-226):
logical (HPFA-1226):
physical:
100BaseFX Fast Ethernet (IEEE 802.3)
1000BaseSX Gigabit Ethernet (IEEE 802.3)
SC (type: MMF; 50/125 µm, 62,5/125 µm)
Current input 300 mA at 5 V
Operating environment Ambient temperature: 5–40 °C
Relative humidity: 20–80 %
Dimensions Width: 52 mm
Height: 31 mm
Depth: 59 mm
Weight: 133 g
1 32 4 5
4655
4655
456
1. Activity LED (orange)
2. Network connector (SC, female)
3. Link LED (green)
4. Printer connector (RJ-45, male)
5. Hole with thread
6. USB cable (type: USB-C)
User Manual [en] 5
LED Display
The LEDs of the HPFA-226 / HPFA-1226 provide information about its status.
Type Plate
The type plate gives important product information, such as hardware and
certification information as well as the serial number. The serial number
contains the production date: nnn JJJJ MM nnnnn.
You need this information for support requests.
LED Action Color Description
Activity blinks at
irregular
intervals
orange Indicates the exchange of network
data packets.
Link permanently on
permanently off
green
-
There is a connection to the fiber-
optic network.
There is no connection to the fiber-
optic network.
6 [en] User Manual
Safety Regulations
Before starting the initial operation procedure of your device, please note the
following safety regulations:
• Read the documentation and make sure that your system meets the
requirements listed therein.
• The device must only be installed and connected to the network by qualified
personnel.
• Avoid contact with humidity or liquids.
• The device must only be connected and operated if it is in perfect condition.
• Make sure that no-one steps on or stumbles over the cables.
• This is a class 1 laser product. If no cable is connected to the SC or ST
connector, invisible laser radiation may occur. Do not expose yourself to laser
radiation and do not look straight into it. Put the provided protective caps on
the SC or ST connector if you do not use it.
• Before unpacking the device, take all necessary precautions to avoid damage
to the device board e.g. electrostatic discharges etc.
User Manual [en] 7
Installing the Fiber Adapter
General Information
The Fiber Adapter is mounted on the outside of the printer back panel.
To mount the Fiber Adapter to the printer mainboard, it is mounted from the
outside over a pre-punched and removable cut-out in the printer´s back plate.
The connection to the printer is established via an internal RJ-45 cable. Power is
supplied via the USB cable by means of an internal USB port of the printer.
Step 1: ’Prepare the printer’ 8
Step 2: ’Gain Access to the Printer Mainboard’ 8
Step 3: ’Mounting the Riser Card (if necessary)’ 8
Step 4: ’Installing the Fiber Adapter’ 10
Step 5: ’Connecting the USB Cable to the Printer Mainboard’ 11
Step 6: ’Reinstall Printer Mainboard Cover’ 12
Step 7: ’Connect the Fiber Adapter to the Network’ 12
Step 8: ’Turn the Printer On’ 12
Important:
Installation steps may vary slightly depending on
printer model:
The Fiber Adapter was developed for a series of
supported printer models which vary in design. All
printer model specifics cannot be provided for in this
manual. Follow the general steps of this manual and
adapt them if needed. In case of questions, contact our
support team 1!
WARNING
The Fiber Adapter must only be installed by qualified
personnel.
WARNING
Before mounting the device, take all necessary
precautions to avoid electrostatic discharges.
WARNING
The printer circuit board may be damaged if it is
touched!
Do not touch the circuit board with hands or tools.
8 [en] User Manual
Tools You Need
• Flat screwdriver
• Philips screwdriver
• Utility knife
• Paper or Cardboard
• Riser Card: ‘HP Internal USB expansion kit’ 4XN67A (Depending on the printer
model, this may already be installed.)
Step 1: Prepare the printer
1. Turn the printer off.
2. Disconnect the power cord from the printer.
(Interrupt the power supply)
3. Disconnect the RJ-45 network cable from the printer.
Step 2: Gain Access to the Printer Mainboard
Printer Mainboard Can Be Removed:
1. Identify the printer mainboard. You can recognize it by the RJ-45 network
connector and the other interfaces.
2. Loosen the knurled screws of the printer mainboard’s plastic cover.
3. Remove the printer mainboard plastic cover.
4. Check if an internal USB-C port is already available.
Step 3: Mounting the Riser Card (if necessary)
An optional hard disk drive (HDD) is mounted in front of the printer mainboard
1. Remove the two plastic pins next to the interfaces that hold the hard drive
frame in place by levering them under with a flathead screwdriver and loos-
ening them.
WARNING
The printer circuit board may be damaged if it is
touched!
Take all necessary precautions to avoid electrostatic
discharges.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Adaptador de SEH
