Segway InfoKey Manual de usuario

InfoKeyProgrammingTool

GUIDE

22081-00000aa

Trademarks

Segway Inc. (“Segway”) owns a number of trademarks including but not limited to, Segway and the Segway “yguy” logo that have

been registered in the United States and in other countries.Those trademarks followed by ® are registered trademarks of Segway

Inc. that have been registered in the United States and in other countries.

All other marks are trademarks or common law marks of Segway Inc. Failure of a mark to appear in this guide does not mean that

Segway Inc. does not use the mark, nor does it mean that the product is not actively marketed or is not signicant within its relevant

market. Segway reserves all rights in its trademarks. All other trademarks are the property of their respective companies.

Contact Information

For support, please contact the company from which you bought the products. For a listing of Authorized Segway Dealers and

Distributors, refer to the Segway website at www.segway.com.

Segway Technical Support: E-mail: Website:

(603) 222-6150 technicalsupport@segway.com http://www.segway.com

Contents

Preface......................................................................................................................................................i

Conventions......................................................................................................................................................................................i

Before You Begin..............................................................................................................................................................................ii

Related Documentation ..................................................................................................................................................................ii

Introduction.............................................................................................................................................. 1

Working with InfoKeys................................................................................................................................2

Preparing an InfoKey for Programming ..........................................................................................................................................2

Returning an InfoKey to Service......................................................................................................................................................2

Installing and Uninstalling the InfoKeyProgrammingTool Software .................................................................3

Installing ..........................................................................................................................................................................................3

Uninstalling......................................................................................................................................................................................6

Setting Up the Programming Fixture ............................................................................................................ 7

Connecting the Programming Fixture ............................................................................................................................................7

Connecting an InfoKey to the Programming Fixture ......................................................................................................................8

Removing an InfoKey from the Programming Fixture....................................................................................................................9

Programming an InfoKey............................................................................................................................10

Logging In ......................................................................................................................................................................................10

Duplicating an InfoKey................................................................................................................................................................... 12

Creating a New InfoKey from an ID Card ...................................................................................................................................... 14

Changing an InfoKey......................................................................................................................................................................16

Finding More Information.............................................................................................................................................................. 18

Closing the Programming Tool...................................................................................................................................................... 18

FAQ .........................................................................................................................................................19

InfoKeySpeed Settings ConversionTable.....................................................................................................21

Error MessageTable ................................................................................................................................. 22

Glossary................................................................................................................................................. 24

Index...................................................................................................................................................... 25

Preface i

Preface

This guide describes how to set up and operate the Segway InfoKey Programming Tool.

Conventions

The following conventions are used throughout this guide.

Standards

Safety messages for this guide and product safety signs and labels are based on standards set forth by the American National

Standards Institute for Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials (ANSI). To assist

in the communication of safety information across language barriers, some safety graphics are based on standards set forth by the

International Standards Organization (ISO).

Safety Alert Symbol

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Signal Words

WARNING indicates a

hazardous situation which, if

not avoided, could result in

death or serious injury.

CAUTION, used with the

safety alert symbol, indicates

a hazardous situation which,

if not avoided, could result in

minor or moderate injury.

NOTICE is used to address

practices not related to

personal injury.

ii Preface

BeforeYou Begin

The computer used to run the InfoKey Programming Tool software must have a high-speed Internet connection.

You must register your InfoKey Programming Tool with Segway before use.

Complete the following steps to register:

1 Locate the 12-digit serial number printed on the outside of the

box and on the bottom of the programming xture.

2 Call Segway Technical Support at (603) 222-6150. Provide the

serial number to register your warranty and receive a user name.

3Log in to http://service.segway.com/registration, select InfoKey

Programming Tool and click REGISTER. Enter the user name assigned

in Step 2 to receive an email containing your password.

Unpack the Segway InfoKey Programming Tool and make sure you have the following pieces:

• Registration Card

• Installation CD

•

InfoKey Programming Tool Quick Start Guide

•

InfoKey Programming Tool Guide

• USB Cable

• Programming Fixture

Related Documentation

Segway Personal Transporter (PT) i2, x2 Reference Manual

Introduction 1

Introduction

The Segway InfoKey Programming Tool gives you the ability to create, duplicate, and adjust settings for InfoKey™ Controllers

(InfoKeys). The InfoKey Programming Tool includes the software application and the programming xture.

This guide describes the following procedures:

• Working with InfoKeys

• Installing and Uninstalling the InfoKey Programming Tool

• Setting Up the Programming Fixture

• Programming an InfoKey

2 Working with InfoKeys

Preparing an InfoKeyfor Programming

To prepare an InfoKey for programming, you must remove

the backplate and battery. Complete the following steps

before programming or creating an InfoKey.

NOTE: Remove the InfoKey from any packaging.

1 If the InfoKey is powered

on, press and hold the

power/standby button

for two seconds to

power off the InfoKey.

2 Remove the InfoKey

backplate by twisting

it counter-clockwise.

3 Remove the battery to

expose the programming

connections.

Returning an InfoKeyto Service

Complete the following steps to return an InfoKey to

service after programming.

1 Replace the battery, with

the positive (plus sign)

facing out.

2Replace the backplate

by pressing and turning

clockwise.

3 To test the InfoKey, stand

no more than 15 ft. (5 m)

from your Segway PT and

press the power/standby

button .

NOTE: Refer to the InfoKey Controller section in the

Segway Personal

Transporter (PT) i2, x2 Reference Manual

for more information about

InfoKey operation.

Working with InfoKeys An InfoKey allows a rider to control and

monitor Segway PT operation. InfoKeys

should be handled with care, and

require the procedures described in this

chapter before and after programming.

Installing and Uninstalling the InfoKey Programming Tool 3

Installing and Uninstalling the InfoKey

Programming Tool Software

Installing

Complete the following steps to install the InfoKey Programming Tool software.

1Insert the installation CD. If the installation screen

does not appear, navigate to the CD drive and

double-click the InfoKey-Setup.exe icon.

If you do not have Microsoft .NET Runtime Environment 3.5

or later, the following error message appears.

Go to

http://www.microsoft.com/downloads/

and

follow the prompts to download and install the .NET

Runtime Environment, version 3.5 or later.

The Segway InfoKey Tool Setup splash screen appears,

followed by the

Welcome to the InfoKey Programming

Tool Setup Wizard

window.

2 Click NEXT to continue.

The

Please Disconnect

window appears. If you have

previously connected the programming xture, disconnect

it before continuing.

4 Installing and Uninstalling the InfoKey Programming Tool

Installing (Continued)

3 Click NEXT to continue.

The

License Agreement

window appears. Read the Segway

Service Software Terms and Conditions.

4 Click I AGREE to accept the Segway terms and conditions

and continue.

The second

License Agreement

window appears. Read the

terms for Nlog.

5 Click I AGREE to accept the Nlog terms and continue.

The

Choose Install Location

window appears. From this

window you can view and accept the default location, or

change the installation directory.

6 Click NEXT to continue.

The

Choose Start Menu Folder

window appears. From

this window you can view and accept the default start

menu folder, or change the location for the InfoKey

Programming Tool shortcut.

Installing and Uninstalling the InfoKey Programming Tool 5

Installing (Continued)

7 Click INSTALL to continue.

The window status changes to Installing, then to

Installation Complete.

8 Click NEXT to continue.

The

Please Connect

window appears.

NOTE: Select a USB port on the computer that you can dedicate

to the InfoKey programming xture. Once the software is installed,

if you connect the programmer to a different USB port it may not

be recognized.

9 Connect the programming xture as described in the

Connecting the Programming Fixture

procedure (p. 7).

When the programming xture is connected, click NEXT

to continue.

The

Completing the InfoKey Programming

Tool Setup Wizard

window appears.

10 Click FINISH to complete the InfoKey Programming Tool

software installation.

Otros manuales para InfoKey

Tabla de contenidos

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario