Seeed Grove Manual de usuario
2
Document Revision History
Revision
Date
Author
Description
1.0
Sep 21, 2015
Victor.He
Create file
3
Contents
Document Revision History···································································································2
1. Introduction ···················································································································2
2. Specification···················································································································3
3. Demonstration ···············································································································4
3.1 Hardware Installation········································································································ 4
3.2 Download Code and Upload ····························································································· 4
3.3 Open Serial Monitor and Get Data···················································································· 4
3.4 K type thermocouple indexing table················································································· 6
4. Resource·························································································································7
1
Disclaimer
For physical injuries and possessions loss caused by those reasons which are not related to product quality,
such as operating without following manual guide, natural disasters or force majeure, we take no
responsibility for that.
Under the supervision of Seeed Technology Inc., this manual has been compiled and published which
covered the latest product description and specification. The content of this manual is subject to change
without notice.
Copyright
The design of this product (including software) and its accessories is under tutelage of laws. Any action to
violate relevant right of our product will be penalized through law. Please consciously observe relevant local
laws in the use of this product.
2
1. Introduction
Thermocouples are very sensitive, requiring a good amplifier with a cold - compensation reference. The
Grove - Temperature Sensor USES a K type thermocouple Temperature detection, with a Thermistor to
detect the ambient Temperature as Temperature compensation. The detectable range of this Sensor is -
50-600℃, and The accuracy is ±(2.0% + 2℃).
3
2. Specification
Voltage
3.3 ~ 5V
Max power rating at 25℃
300mW
Operating temperature range
-40 ~ +125 ℃
The temperature measurement range is
-50 ~ +600℃
Amplifier output voltage range
0 ~ 3.3 V mv
Cold junction compensation (environment temperature measurement)
Thermocouple temperature measurement accuracy
± 2.0% (+ 2 ℃)
4
3. Demonstration
Here is an example to show you how to read temperature information from the sensor.
We need a Seeeduino V3.0 and a Grove - High Temperature Sensor.
3.1 Hardware Installation
There's a I2C Port on Seeeduino, actually it's connect to A4 and A5 else. So we can use this port to read
data from the sensor.
Let's plug this sensor to I2C port of Seeeduino.
3.2 Download Code and Upload
You can download the library in here
Then extract the library the Library folder of Arduino, open the demo in examples folder.
Then upload it to your Seeeduino.
3.3 Open Serial Monitor and Get Data
Then, open your Serial Monitor, you can find the temperature in Celsius here.
5
6
3.4 K type thermocouple indexing table
As a reference, the following is K type thermocouple indexing table.
Otros manuales para Grove
14
Tabla de contenidos
Otros manuales de Accesorios de Seeed
Seeed
Seeed Grove Manual de usuario
Seeed
Seeed Grove-Q Touch Sensor Manual de usuario
Seeed
Seeed Grove 101020031 Manual de usuario
Seeed
Seeed SYH24A1 Manual de usuario
Seeed
Seeed Grove Manual de usuario
Seeed
Seeed Grove - I2C Manual de usuario
Seeed
Seeed Grove Moisture Sensor Manual de usuario
Seeed
Seeed Sensecap LoRaWAN Manual de usuario
Seeed
Seeed Sensecap S-EC-01 Manual de usuario
Seeed
Seeed Grove Manual de usuario
