Seedsware EM Series Manual de usuario

- 1 - 17A4A4-00003E-2

EM Series

Embedded Linux

Open Frame Panel Computer

EM8/EMG8

Model:

EM8-W104A7-0005-207

EMG8-W104A7-0005-207

EM8-205A7-0005-207

EMG8-205A7-0005-207

Instruction Manual

Seedsware Corporation

http://www.seedsware.co.jp/global/

- 2 - 17A4A4-00003E-2 
 
Table of Contents 
Table of Contents.......................................................................................................................................... 2 
1. Introduction............................................................................................................................................ 4 
2. Notes..................................................................................................................................................... 4 
3. Precautions for Safe Use ...................................................................................................................... 4 
3-1 Warnings...........................................................................................................................................................5 
3-2 Cautions............................................................................................................................................................6 
3-3 Handling of LCD Panels....................................................................................................................................8 
3-4 Handling of Resistive Touch Screen..................................................................................................................8 
3-5 Handling of Projected Capacitive Touch Screen ...............................................................................................8 
3-6 Handling of microSD card .................................................................................................................................9 
4. Packaged Contents............................................................................................................................. 10 
5. Names of Parts.................................................................................................................................... 11 
6. External Interface................................................................................................................................ 13 
6-1 microSD card slot........................................................................................................................................13 
6-2 Serial Interface（SIO1/SIO2）....................................................................................................................13 
6-3 Ethernet......................................................................................................................................................14 
6-4 USB Host Interface.....................................................................................................................................14 
6-5 USB Device Interface..................................................................................................................................14 
6-6 Power Connector........................................................................................................................................15 
6-7 Battery Interface..........................................................................................................................................15 
6-8 DIO Interface 1............................................................................................................................................16 
6-9 DIO Interface 2............................................................................................................................................18 
7. Installation and Wiring......................................................................................................................... 19 
7-1 Installing condition...........................................................................................................................................19 
7-2 Mounting.........................................................................................................................................................20 
7-2-1 Panel mounting........................................................................................................................................20 
7-2-2 Panel mounting........................................................................................................................................21 
7-2-3 Touch Screen(LCD) hight adjustment......................................................................................................22 
8. Wiring Procedure................................................................................................................................. 24 
Wiring Location....................................................................................................................................................24 
1) Connecting Unit to Power .............................................................................................................................25 
2) Connecting to LAN cable ..............................................................................................................................25 
3) Connecting to the battery..............................................................................................................................25 
4) Connecting to USB Mini-B cable...................................................................................................................25 
5) Connecting to USB device............................................................................................................................25 
6) Connecting to communication cable..............................................................................................................25 
7) Connecting to DIO interface FFC..................................................................................................................26 
9. Inserting and Removing the microSD card.......................................................................................... 27 
9-1 Inserting the microSD card..............................................................................................................................27 

- 3 - 17A4A4-00003E-2 
 
9-2 Removing the microSD card ...........................................................................................................................28 
10. Calibration........................................................................................................................................... 29 
10-1 Sensor Sensitivity Calibration........................................................................................................................29 
10-2 Coordinate Calibration...................................................................................................................................29 
11. Starting Method................................................................................................................................... 30 
12. Maintenance........................................................................................................................................ 30 
12-1 Display..........................................................................................................................................................30 
12-2 Regular Maintenance....................................................................................................................................30 
13. Compatible Standards......................................................................................................................... 30 
13-1 RoHS Directive .............................................................................................................................................30 
14. List of Option....................................................................................................................................... 31 
15. Warranty and Repair........................................................................................................................... 32 
15-1 Inquires.........................................................................................................................................................32 
15-2 Warranty.......................................................................................................................................................32 
15-3 Production Discontinuance............................................................................................................................32 
15-4 Repair Condition ...........................................................................................................................................32 
16. Others ................................................................................................................................................. 33 
 
 

- 4 - 17A4A4-00003E-2

1. Introduction

Thank you for choosing Seedsware products. Please read this manual carefully and use our product

correctly.

2. Notes

■Reproduction and/or duplication of this product and/or this manual, in any form, in whole or in

part, without permission is strictly prohibited.

■Contents of this product and/or this manual are subject to change without previous notice.

■Although all efforts have been made to ensure the accuracy of this product and/or the contents of

this manual, should you notice any errors or have any questions, feel free to contact and notify

us.

■Seedsware shall not be held liable in any way for damages or losses, nor be held responsible for

any claims by a third party as a result of using this product.

3. Precautions for Safe Use

Precautions are noted in this manual in order for the product to be used safely. Read this manual

along with other related manuals carefully to understand the correct handling and functions of the unit..

Safety Symbol Legends

Safety symbols listed below are noted throughout this manual for the TM to be used correctly. These

symbols stand for very important safety information as noted below:

Warning

Indicates a procedure, condition, or statement that, if not strictly observed, could result in

severe human injuries or loss of life.

Caution

Indicates a procedure, condition, or statement that, if not strictly observed, could result in

human injuries or property damage.

Indicates a procedure, condition, or statement that is strictly prohibited for correct use of the

equipment. (Forbidden)

Indicates a procedure, condition, or statement that must be strictly followed for correct use of

the equipment. (Mandatory)

- 5 - 17A4A4-00003E-2

3-1 Warnings WARNING

Warnings for Design

Designing switches that might cause human injuries and/or property damage on the touch screen is strictly

prohibited. Unintentional output signals due to malfunction of the main body, units, and/or cables, etc. can

cause serious injuries. Design the system so that switches with major functions are equipped on other

devices.

Designing safety related switches on the EM8 is prohibited. Switches related to safety, such as emergency

stop switches, should be made on a different hardware.

Design the system so the device will not malfunction due to communication abnormalities between the EM8

and the host controller. Failure to follow may result in injury to the human body or damage to properties.

Do not use EM8 as a major warning system that may cause injuries/ serious material damages, and or

production stoppage. Control devices related to critical warning displays and warnings should be structured on

an independent, redundant hardware system or a mechanical interlock.

EM8 is not intended for use for aircraft equipment, aerospace instruments, trunk line communication

equipment, nuclear power control equipment, and medical equipment that concerns life support, and or other

equipment that concerns high reliability and safety. It cannot be used for these purposes.

When using the EM8 for purposes that concern high reliability and safety functions and accuracy such as

transport equipment (trains, automobiles, ship, etc.), crime/disaster prevention devices, various safety

devices, and medical equipment that does not concern life support, be sure to have safety features including

redundancy and false operation prevention measures incorporated into the entire system.

Display will black out when the backlight goes out. If mistakenly operated in this condition, it might result in

improper operation. Do not design touch-switches that might cause human injuries and material damages on

the EM8.

Phenomenon as below will occur when the backlights go out:

(1) Screen will go out even if the Backlight OFF function is not set.

(2) Display does not recover at touch after the backlight goes off as well as the display.

Warnings for Handling

Do not modify/disassemble the EM8. It may cause fires and/or electric shocks

Do not use around flammable gas. It may cause explosions.

Do not put any kind of liquid, such as water, and metals into the product. It may cause fire and/or electrical

shocks.

- 6 - 17A4A4-00003E-2

Warnings for Wiring

For wiring and installation, please refer to the manual and specifications in order to conduct it correctly. It may

cause fires and/or electric shocks.

Before installing the power cable, make sure power is not being supplied from power source. It may cause

electrical shock.

Do not use power voltage other than what is specified. It may cause fires and/or electric shocks.

3-2 Cautions Cautions

Cautions for installation

Make sure cables are securely connected to connectors to avoid wrong input and output due to loose

connection.

Cautions for Applying Current and Maintenance

During access to microSD card, do not turn off the EM8 or pull out the microSD card. It might damage the

data inside of the microSD card.

Cautions for Wiring

Use D type grounding dedicated to EM8 for FG terminals. It may cause electric shocks or malfunctions.

Make sure chips and objects from wiring do not enter the EM8. It may cause fire or malfunctions.

Cautions for Disposal

When disposing the product, please treat is as industrial waste.

- 7 - 17A4A4-00003E-2

Precautions for Safe Use

Do not press down hard on the display area of EM8 with hard objects. It may break the LCD panel and may

cause injuries. Also, do not press down on the panel with sharp objects such as mechanical pencils or

drivers. It may damage the displays.

Installing EM8 in areas out of the range of the specification will cause failures.

Do not use in areas where temperature rises and dwells rapidly. It may cause failures.

Avoid areas where rapid temperature change could cause condensation. It may cause failures.

Do not put any kind of liquid, such as water, or any metal parts into EM8. It may cause failures or electric

shocks.

Do not use or keep EM8 in locations with exposure to direct sunlight, high temperature, fine particles,

humidity, and/or vibrations.

Do not use or keep in areas where gasified chemicals are exuded into the air, or where chemical

contamination can occur.

Acid, Alkali, other saline chemicals: Failures due to corrosion

Organic solvents: Fire

If the surface of EM8 gets dirty, wipe with a dry, soft cloth damped with a neutral detergent then wrung dry.

Do not use thinner or organic solvents.

LCD of display will deteriorate with ultraviolet rays. Do not use or keep in areas under strong ultraviolet rays.

When stored in sub-ambient temperature, LCD of display might coagulate and cause damage to the panel.

Also, when stored in over-ambient temperature, the LCD will turn into isotropic liquid and will not turn back to

its original state. Please store in specified ambient temperature.

After turning off the power of EM8, leave for a while before turning the power back on. It might not function

normally.

Be sure to take back-up assuming the loss of data in the EM8 in an event of an unexpected accident.

- 8 - 17A4A4-00003E-2

3-3 Handling of LCD Panels

(1) The LCD display contains skin-irritating materials. If liquid materials flow out due to damage and comes

in contact with skin, wash the area under running water for at least 15 minutes. If it gets into the eyes,

wash under running water and consult a doctor.

(2) The LCD display might have uneven brightness according to the contents being displayed. This is not a

malfunction.

(3) Minute spots (dark or bright) may occur in the LCD display elements. This is a basic characteristic of the

LCD display and not a malfunction.

(4) When LCD display is viewed outside the specified view angel, the color might seem different. This is a

basic characteristic of the LCD display and not a malfunction.

(5) When displaying a same image for a long period of time, it might cause an image lag. This is a basic

characteristic of the LCD display and not a malfunction.

In order to avoid image lags, please follow the below procedures:

1. When leaving the same image displayed, use the” display off” function.

2.Change the image displayed periodically and do not display the same image for a long period of time.

3-4 Handling of Resistive Touch Screen

(1) Please be warned that applications that require for one point to be pressed for a prolonged time may

cause failures due to the touch screen's structural characteristics.

(2) The touch screen is made of glass. Glass becomes easy to break if it gets scratched. Please handle as

not to hit glass or hard objects

(3) Due to the characteristics of the touch screen, pressing a little outside the display area may detect it as

the coordinates of the edge of the touch panel. Please consider the application carefully and design the

application.

(4) Touch screen coordinates may shift due to aging or depending on its operating environment. Conduct

calibration of the touchscreen to correctly set the coordinates.

3-5 Handling of Projected Capacitive Touch Screen

1) If elements that change ambient environments or electric fields (capacitors with large capacity, power units,

and materials with high permittivity such as metals) are set close to the product, it might have impact to the

coordinate detection. Make sure to keep a good distance from the above unstable elements as much as

possible when designing.

2) Due to the characteristics of the touch screen, its functions might become unstable according to the

environment it is installed. For correct operations, perform sensitivity sensor calibration when building into a

device.

Also if at any time the touch screen operation become unstable due to changes in environment or

installation conditions, perform sensitivity sensor calibration.

3) The touch screen surface is made of glass. Glass is subject to break once scratched. Please handle with

care and avoid glass from contacting other glass and hard objects.

4) Touch screen may not operate correctly when there is moisture on the surface.

When moisture is detected on the touch screen surface, please wipe it dry before use.

5) When designing applications, consider the fact that area slightly outside the display might be read as a

coordinate due to the characteristics of the touch screen when touched.

- 9 - 17A4A4-00003E-2

3-6 Handling of microSD card

1) Use a computer for important data and take backup to an outside media (hard disc, CD-R, etc.) regularly.

We will not be held liable for any data lost or changed that is registered in the microSD card.

2) Do not remove the microSD card or turn the unit power off during write or read. It may cause the data inside

the unit or the microSD card to be lost or damaged (deleted).

3) Please keep the socket terminal of the memory cards and microSD card clear of foreign objects.

4) Do not touch the terminals with fingers or metal objects. It may cause malfunctions.

5) When inserting the microSD card, make sure it is inserted in the correct direction.

6) Do not apply undue force when inserting/removing.

7) Do not insert anything other than a microSD card into the microSD card socket. Also be careful of any

foreign objects entering the socket.

8) Do not bend, break, or place under heavy objects.

9) Do not place in areas with sudden temperature change. Condensing will cause malfunctions.

10) Do not place in areas near corrosive chemicals or where corrosive gases evolve. It may cause malfunctions.

11) When cleaning, wipe with a dry soft cloth.

12) When carrying and storing, place the microSD card memory card in its protection case

- 10 - 17A4A4-00003E-2

4. Packaged Contents

Below are included in the package. Please check before use..

■4.3”/5.7”

*Maximum number of units that could be stored: 10 units

＜Note＞

Although efforts have been made to ensure quality and packaging at shipment, should you notice any damage or a

shortage of parts, please contact a dealer or Seedsware for additional instructions before use.

Main Unit 10 units/box*

Otros manuales para EM Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel táctil de Seedsware

Seedsware

Seedsware TMG-310-DC00-01 Manual de usuario

Seedsware

Seedsware EMG7 Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario