SecurityMan iCamDVR Manual de usuario
USB Internet Camera & DVR Convertor Box
Easily turn Security camera
into an Internet Security WebCam!
iCamDVR User’s Manual
2 | SecurityMan
Copyright Notice
This manual is furnished under license and may be used or copied only in
accordance with the terms of such license. Except as permitted by such license
, no part of this publication may be reproduced , stored in a retrieval system ,
or transmitted , in any form or any means , electronic , mechanical . Recording,
or otherwise, including translation to another language or format, without
the prior written permission of SecurityMan. The content of this manual is
furnished for informational use only, is subject to change without notice,
and should not be construed as a commitment by SecurityMan. SecurityMan
assumes no responsibility or liability for any errors or inaccuracies that may
appear in this book. All other product names, trademarks and registered
trademarks in this document are the properties of their respective holders. FCC
Information Notes on FCC’s “Consistent Statement of Information”This product
meet the requirements specied in Part 1 5 of FCC Regulation. Operation rests
with the following two conditions:
(1 ) The equipment should not cause any harmful interference .
(2 ) The equipment must receive and process any interference ,
Including any possible interference caused by operation Mistakes .
Warranty
SecurityMan warrants this product will be free from defects in materials and
workmanship for period of time specied on the product packaging. This
limited warranty shall commence from the date of purchase. SecurityMan
Products warranty is not transferable and is limited to the original purchaser.
If the product is found to be defective then, as your sole remedy and as the
manufacturer’s only obligation, SecurityMan will repair or replace the product.
This warranty shall not apply to products that have been subjected to abuse,
misuse, abnormal electrical or environmental conditions, normal wear and tear
or any condition other than what can be considered normal use.
Limitation of Liability
The liability of SecurityMan arising from this warranty and sale shall be limited
to a refund of the purchase price. In no event shall SecurityMan be liable for
costs of procurement of substitute products or services, or for any lost prots,
or for any consequential, incidental, direct or indirect damages, however
caused and on any theory of liability, arising from this warranty and sale. These
limitations shall apply not withstanding any failure of essential purpose of any
limited remedy.
SecurityMan
4601 E. Airport Drive, Ontario, CA 91761, USA
Tel: 888-977-3777 or 909 -230-6668
Fax: 909-230-6889
Website: http://www.securitymaninc.com
Copyright 2008 by SecurityMan v4.10
3 | SecurityMan
TABLE OF CONTENTS
Introduction
iCamDVR product features
System Requirements
iCamDVR Specications
Hardware Driver Software Installation
iCamDVR
Windows Vista/7 Driver Software Installation
Windows Vista/7 Driver Software Uninstall
Windows 2000/XP Driver Software
Main Display Interface
Display Control Panel
Display Control Panel
Quick Channel Display Switch
Snapshot
Urgent Record
Login
Record Status Panel
Manual Record Mode
Schedule Record
Motion Detection Record Mode
Recycling Record
6
8
9
10
10
14
15
16
16
17
17
17
17
18
18
18
19
19
21
21
21
21
21
21
22
22
24
24
24
24
25
25
25
25
25
25
25
26
26
28
System Setup
Basic Conguration Panel
Dwell Interval
Caption
Resolution
D-Interlace
Live Audio
Storage Disk
Internet Cong
Record Setup Panel
Time Stamp
Switch
Manual Record
Manual Record Frame Rate
Schedule Record
Schedule Record Frame Rate
Motion Detection
Motion Record Frame Rate
Camera Security
Record Quality
Audio In
Schedule conguration Panel
Video ProAmp Panel
4 | SecurityMan
28
29
29
29
30
30
30
30
33
33
34
36
36
36
37
38
39
39
40
41
Motion Detection conguration Panel
Set Motion Detection Sensitivity
Alarm Conguration Panel
Disk Shortage Alarm
Pre-Alarm Record
Motion Holding Time
Alarm Output Function Conguration
Auto Mail Alarm Function Conguration
Emap Function Conguration
Emap Edit
To view the Emap
P.T.Z Conguration Control Panel
Protocol Conguration
Relative Denitions
Serial Ports Setting
User Conguration Panel
To Change User’s Rights/Privileges
To Add User
To Delete User
PAN/TILT/ZOOM Control
Search and Playback Panel
Record Search
Backup Recorded Files
Delete Recorded Files
Capture Picture
Print & Print Setup
Image Zoom In / Out
Remote Surveillance & Playback
Remote Live Surveillance
Remote Intranet Access
Remote Internet Access
Internet Conguration (in Basic Conguration)
Remote WebCam Live Surveillance
Remote Playback (RPB) Panel
Date Search
Record Events
Control Buttons and Functionality
Backup Recorded File
Mobile Surveillance
iPhone, iPad, and iTouch Application
iPhone, iPad, and iTouch Application via PC
45
45
49
50
51
51
53
54
54
54
54
54
55
57
57
58
59
60
60
61
62
5 | SecurityMan
Using SuperCam
Live View
Image Playback
Video Playback
Server List
Settings
Storage
Display
Alarm
Log
Information
Help
Log O
Android SuperCam Application
Windows Mobile Connection
Symbian 60 Series Connection
BlackBerry Connection
Frequently Asked Questions
Installation Q & A
SuperDVR Q & A
Network Q &
Other Q & A
64
65
66
67
67
68
68
68
68
68
69
69
69
70
73
74
77
82
83
85
86
89
89
90
91
92
94
100
101
101
104
105
Troubleshooting
System requirements for iCamDVR & Remote
Client Computers
Installation Instruction:
Troubleshooting
APPENDIX
I: iPad Software installation and Operation
Install Through PC
Operation
II: Smart Phone Operation System Compatibility
III: SuperDVR: Function Tree Diagram
SuperDVR
WebCam
Remote Playback
6 | SecurityMan
INTRODUCTION
Thank you for choosing iCamDVR!
The iCamDVR system is a 4 channel USB Internet camera
and DVR adapter which implements MPEG4 compression
format and enables 4 channel real-time/time-laps
surveillance. iCamDVR has a powerful compression rate
and other network features in which synchronous audio/
video compression transmission. It is widely used in banks,
intelligent communities, trac management units, medical
department buildings, educational buildings, armed forces,
etc. iCamDVR is the state of the art and cost-eective
products that is your ideal choice.
This user’s manual covers a wide range of features,
functionality and software usage which includes hardware
and software driver installation. Please make sure to follow
the procedure as instructed in this manual accordingly.
Proper setup and knowing your product’s ability can keep
this digital surveillance system running more eciently.
iCamDVR product features:
Schedule Record Mode•
Choose any time in a day of the week to setup schedule
recording. Schedule recording will automatically start to
record when the scheduled set time is reached.
Motion Detection Mode•
Motion detection area and motion sensitivity level is
adjustable. Each of the 4 channels is independently
operated. Motion detection sensitivity level can be
adjusted for each signicant channel. The system
begins to record when the camera(s) detects motion or
moving objects and the system will stop recording after
a period of time, this period of time is adjustable in the
motion setup of SuperDVR.
Recycle Record Mode•
The record storage can be selected from the sequence
list of hard drives/partitions detected by SuperDVR
under Basic Congurations on the hosting computer.
If multiple volumes or drives are selected, the record
storage will automatically jump to the next drive/
partition when it is full. If all the partitions are full then
the recycling record mode will be take eect, the oldest
recorded data will be overwritten by new data. Hard
disk minimum space detection will trigger the buzzer
alarm if storage space is less then the minimum storage
set and will automatically stop the recording, alarm
buzzer is active only if the recycle recording is inactive.
P.T.Z Control•
Control multiple speed domes and integrative cameras,
including pan, tilt, zoom, focus, iris adjustment, and
preset point/auto scout for P.T.Z devices. Supported
protocols are Null, Lilin, Minking, Neon, Pelco-D, Pelco-P,
Star, Vido, and VISCA.
7 | SecurityMan
Each channel has independent color, contrast, brightness,•
hue, and saturation adjustment.
MPEG4 compression format greatly reduces HDD usage.•
Video playback function includes pause, stop, fast-•
forward, rewind, previous/next section increament of 6
mins, frame-by-frame and image snapshot.
Advanced search modes; search by date/time, camera,•
record mode, or a random combination of all three
modes.
Supports recorded le backup, delete by date/time or by•
camera.
Convenient to add system capabilities via software•
upgrades.
Low CPU/Storage resources usage utilizing advanced•
technology/compression.
Remote Surveillance and P.T.Z control through Intranet•
and Internet.
Pre-Alarm recording, buzzer alarm, email alarm out.•
Can greatly decrease fragmented les while use•
NTFS partition.
Users Management•
There are 3 level of users privileges; Administrator,
Power Users, and Normal Users. Dierent users
have dierent rights to ensure system security
and accessibility.
Multi-Channel Display•
Support dierent multi-channel display mode, full
screen display and auto dwell display.
Watch Dog Function•
In case SuperDVR driver or windows system is froze
or lock up, the watchdog feature will automatically
restart the computer and automatically login to
SuperDVR system.
Web Based remote access liveview and playback.•
Smart Phone supporting Win Mobile, WinCE, iPhone,•
Symbian, BlackBerry and Android OS.
Supports dynamic domain name server.•
One iCamDVR to a PC, the maximum frame rate can•
reach 30 fps with 4 channels.
Supports 320x240 / 640x480 (NTSC) and 352x288•
standard resolutions.
8 | SecurityMan
System Requirements
iCamDVR Minimum System Requirements is shown as
Table1.
We recommend Intel motherboards, chipsets and CPUs or other
equivalent system components similar to the minimum system
requirements or greater. The following are other motherboards,
chipsets and CPUs that are known to be compatible:
System Mother-
board
CPU Memory Video Card
1Mobile Intel
(R) 945GM
Intel T2500
2.0GHz
2.0GB Intel (R)
GMA950
2ASUS
P5GD2-X
915
Intel P4-640
3.2GHz
1.0GB nVIDIA
GeForce
6600GT
3ASUS
MZN32
( nVidia
nForce
590SLI)
AMD
Athlon(tm)
64_2 3800+
512MB nVIDIA GE-
FORCE 7600
4GA-K8VT890
(VIA K8T890
)
AMD
Athlon(tm) 64
3000+
512MB Rad EON
X1600
5WinFast
760G
_Sis 760GX_
AMD Sempron
3000+
256MB Sis Mirage
6ASUS K8N4
(nVidia
Force4)
AMD Sempron
3000+
512MB WinFast
PX6600LE
Table 2 - iCamDVR System Requirements
Type
PC Module
iCamDVR
CPU Intel P4 Celeron Processor 1.7GHz
Motherboard Intel 845/865/915 series
HDD 80GB Free
RAM 256MB
VGA GeForce2_GeForce4_FX5200_ATI Rage128
OS Windows 2000 SP4, 2003 SP1, XP SP2, Vista,
& 7 (32-bit/64-bit)
DirectX 9.0 or above
USB 2.0
Table 1 - iCamDVR System Requirements
9 | SecurityMan
iCamDVR Specications
Video format: NTSC/PAL (selectable).•
Resolution: 320x240/ 640x480(NTSC), 352x288/•
704x576(PAL).
Maximum Frame rate per channel: 30 ftp (NTSC) 4•
channels; 7.5fps each channel (option), 25 fps (PAL) 4
channels; 6.25fps each channel.
Screen set: resolution 1024_768, color quality 16 bits or•
32 bits @ 96% DPI
Video Resolution: 320x240 or 640x480 (NTSC)•
Compression code rate: 50kbps – 1.2Mbps•
Compression format: MPEG4•
4 x RCA Video Input•
2 x Audio Input Channel (select one)•
Video Output: USB 2.0 (to PC)•
Recorder Media: HDD, USB Disk, CD-RW•
Record Mode: Motion, Schedule, Manual•
Network Protocol: TCP/IP•
PTZ Protocol: Null, Lilin, Minking, Neon, PelcoD, PelcoP,•
Star, Vido, and VISCA
Web Based remote liveview and playback from Internet•
Explorer Web Browser.
10 | SecurityMan
Windows Vista/7 Driver Software Installation
Plug in iCamDVR hardware to the computer via USB2.0
port. Insert the auto run CD into the CD/DVD ROM tray to
automatically install the driver software and the following
windows will appear:
NOTE
If the CD is inserted and the auto run does not execute please
go into the CD directory into a folder called“DVR” and simply
click on “SETUP.EXE” and the installation process will begin.
Select and click on “Install or run program” to continue
installation.
iCamDVR
Support Windows 2000, XP, Vista, 7(32-bit/64bit) OS
HARDWARE DRIVER SOFTWARE INSTALLATION
USB Connection
to computer
Video Inputs Audio Inputs
Figure 2 - iCamDVR Installation
Figure 1 - iCamDVR
Otros manuales para iCamDVR
1
Tabla de contenidos
Otros manuales de DVR de SecurityMan
