Security Labs SLD230M Manual de usuario

SLD230M

Mobile DVR

Owner’s Manual

Security Labs, Inc -15540 Herriman Blvd.-Noblesville, IN 46060

Customer Service: 1-800-774-0284

www.security-labs.com

CONTENTS

1. Features……………………………………………………….3

2. Specifications………………………………………………….4

3. Rear Panel Description……………………………………… 5

4. Function Key Description…………………………………….6

5. Playback Mode……………………………………………….. 7

5.1 Play Mode…………………………………………........ 7

5.2 Search……….…………………………………….........8

6.Recording Mode……………………………………………… 9

7.Menu Set Up…………………………………………………..9

7.1 Enter Main Menu…………………………………….....9

7.2 System Status……………………………………..........10

7.3 Date / Time………………………………………….......11

7.4 Record Setting…………………………………………..12

7.5 Record Mode…………………………………………... 13

7.6 Alarm Output………………………………………….... 16

7.7 Engineering Setup……………………………………... 17

7.7.1 Set Password…………………………………... 17

7.7.2 Camera Title Setup…………………………….. 18

7.7.3 Video Quality…………………………………….. 18

7.7.4 Hard Disk Erase……………………………….. 19

7.7.5 Color Bars……………………………………….20

7.7.6 Load Factory Defaults……………………….20

8.Recording Reference Time Table…………………………... 21

9. IMPORTANT SAFEGUARDS –READ BEFORE

OPERATING THIS UNIT……………………………………23

1. Features

?? Automatically detects NTSC/PAL

(Please connect the video source, before connecting the power supply.)

?? Tapeless recording replaces conventional time-lapse

recording.

?? MJPEG video compression

?? Motion detection recording.

?? Recording modes: continuous, schedule, and motion

detection.

?? 1 channel audio recording.

?? Quick and easy search for events by time / date.

?? Equipped with anti-vibration and shock resistant chassis.

?? Easy to operate front panel.

?? Alarm notification when storage capacity is full.

?? Automatically returnsto original operation when recovering

from a power failure.

?? Suitable for many types of transportation applications.

?? Supporting function to format a new hard disk drive.

2. Specifications

Operation Mode Display

Front panel LEDs, OSD

Recording Speed 720 x 240 : 1–10 Frames/sec (adjustable)

360 x 240 : 1–15 Frames/sec (adjustable)

Recording Mode Manual

Schedule

Motion Detection (Sensitivity Adjustable)

Audio Recording 1 ch

Compression MJPEG

Camera Input 1ch BNC (NTSC/PAL)

Video Output Composite video (BNC) x 2

Playback Function Playback —forward or reverse

Fast forward

Fast reverse

Forward one frame

Zoom

HDD (Hard Drive) 30 GB

Built-in Buzzer Video input signal loss trigger,

Motion detection alarm

Watch-Dog Function Automatically returns to original

operation when recovering from a

power failure.

Search Mode Date, Time

Operation Temperature 41 to 104 Degrees F (5 to 40 Degrees C)

Power Supply AC100V~240V, 50/60Hz

DC 12V/4A

Power Consumption 12 W

Dimensions6 7/8” x 9 1/8” x 2” (W x D x H)

175 mm x 233 mm x 52 mm (W x D x H)

Weight 3.08 lbs. (1.4 Kg)

3. Installation

Rear panel

Power Supply:DC 12 Volts / 4Amps

OUTPUT:6 Pin Mini Din -Video / Audio output terminal, accessory DC power.

INPUT:6 Pin Mini Din -Video / Audio input, accessory DC power.

VIDEO IN:Connect to a camera, or monitor “Video output”.

VIDEO OUT:Connect to a monitor “Video In”.

VCR OUT:Connect to a VCR ”Video In”.

AUDIO IN:Connect to a camera or monitor “Audio Out”.

AUDIO OUT: Connect to a VCR or monitor “Audio In”.

NOTE:

DVR automatically detects NTSC/PAL, please connect the video

camera before connecting the power supply.

. Function Key Description

Front Panel

MENU:Menu set up

ENTER:Enter to sub-menu or editing procedure.

EXIT:Press this function key to return to the previous selection.

REC:In standby mode, press this key to enter the record mode.

PLAY:In standby mode, press this key to play the last recorded file.

SEARCH:In standby mode, press this key to display log file lists.

Dual Function Key Descriptions:

STOP<?,?>:

In the menu setup mode, move to the left (up) item during the editing

procedure.

In playback mode, press this key to stop playbackand return to standby

mode.

STEP <?, >:

In the menu setup mode, move to the right (down) item duringthe editing

procedure.

In playback mode, press this key to pause or manually advance images.

REW <-,??>:

In the menu setup mode, use this key to decrease a value.

In playback mode, press this key to fast reverse images.

F.F. <+, ??>:

In the menu setup mode, use this key to increase a value.

In playback mode, press this key to fast forward images.

5. Playback Mode

5.1 Play Mode

In standby mode, press the <PLAY> key to enter the playback mode,

or press the <SEARCH> key to enter the log files list (including: date,

time), then press the <PLAY> key or <ENTER> key to display image.

(The details of the Search function are explained in the next section.)

?Quick Image Search:

During playback:

Press the <F.F.> key, for fast forward search image (x2, x4).

Press the <REW> key, for normal and fast reverse image (x1, x2,

x4).

?Pause / Still Frame:

During playback:

Press the <STEP> key, to pause and manually advance images.

?Zoom:

During playback:

Press the <ENTER> key to enlarge the picture by a factor of 2.

This will magnify the central area of the picture when recordings

are made with the resolution set to 720 x 240. When recordings are

made with the resolution set to 360x240, the zoom function will

allow the picture to fill the entire screen

?Stop mode:

Press the <STOP> key to stop play mode and return to standby

mode.

5.2 SEARCH

To perform a time / date search, press the <SEARCH> key to display the

screen below:

Use the <?>or<?> key to move the cursor (Highlight) up or down to the

area to be adjusted, press the <+> or <->key to make changes.

Year / Month:

Enter the year / month by pressing <+>or <->key to select the

year / month.

Day / Hour / Minute:

Enter the correct day and time by pressing <+> and <->key.

After all selections have been made, press the <PLAY> or <ENTER> key

to enter play mode, or <EXIT> key to return to standby mode.

Legend:

Red Bar:Indicates previously made Motion Recordings.

Blue Bar:Indicates previously made manual or schedule

recordings.

MAIN MENU

SYSTEM STATUS

DATE / TIME

RECORD SETTING

RECORD MODE

ALARM BUZZER SETUP

ENGINEERING SETUP

6. Recording Mode

Manual Recording:In Standby mode, press the <REC> key to start

recording, press the <STOP> key to stop manual

recording.

?? For functionsincluding: Schedule Recording and Motion

Detect Recording please refer to Menu Setup below.

?? If Schedule Recording,or Motion Detect Recording,(set in

Recording Mode)are enabled, the <STOP> key does not

function when pressed in order to protect recordings.

?? During recording, items under Main Menu may not be accessed

to make adjustments, except System Status and Recording

Mode.

7. Menu Set Up

7.1 Enter Main Menu

Press the <MENU> key to enter the Main Menu.

All of the items in the main menu contain sub

menus that will be described step-by step in the

following section Use the cursor to select the

needed sub menu by using the <?>or <?>

keys.

Press the <ENTER> key to show the sub menu.

Press the <EXIT> key to return to the previous

page.

7.2 System Status

From the Main Menu, select System Status.

SYSTEM STATUS

TOTAL CAPACITY : 29.2GB

REMAINING TIME

0.2

Press the <ENTER> key to show the system

status summary page.

Press the <EXIT> key to return to the Main Menu,

Press the <EXIT> key again to return to normal

video.

NOTE:

?? TOTAL CAPACITY –Displays the size

of the internal hard disk drive.

?? REMAINING TIME –The amount of time

left before the hard disk drive is full.

0.2HR indicates a full drive, with a

standard 200Meg of space constantly

available to assist the recording process.

?? QUALITY –Choose from LOW, MID, or

HIGH in the Record Setting Menu.

?? RESOLUTION –Choose from 720 x 240

or 360 x 240 in the Record Setting Menu.

?? FRAME RATE -Adjusted by Rec Rate in

the Record Setting Menu.

Tabla de contenidos

Otros manuales de DVR de Security Labs

Security Labs

Security Labs SLD261 Manual de usuario

Security Labs

Security Labs SLD 245 Manual de usuario

Security Labs

Security Labs SLD260 Manual de usuario

Security Labs

Security Labs SL820 Manual de usuario

Security Labs

Security Labs H.264 Manual de usuario

Security Labs

Security Labs SLD240 Manual de usuario

Security Labs

Security Labs 960H Series Manual de usuario

Security Labs

Security Labs Best Picture Quality - JPEG2000 Manual de usuario

Security Labs

Security Labs H.264 Manual de usuario

Security Labs

Security Labs SLD251 Manual de usuario

Security Labs

Security Labs SLD274 Manual de usuario

Security Labs

Security Labs SLD310 Manual de usuario

Security Labs

Security Labs SLD284 Manual de usuario

Security Labs

Security Labs SL720 Manual de usuario

Security Labs

Security Labs SLD250 Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario