Secura QLT35 Manual de usuario
QLT
35
INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call. We’re ready to help!
US: 800-359-5520 • EMEA: +31 (0) 495 580 852 • UK: 0800 056 2853
Texto en español, página 14 Deutscher Text Seiten 20 Svensk text sida 26
Русский текст: стр. 35
Texte français page 17 Nederlandse tekst op pagina 23
日本語は 29 ページ
中文文字说明请参见第 32 页
2
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
110 lbs.
(49.8 kg)
Ready to begin?
Does your TV
(including accessories)
weigh more than
110 lbs. (49.8 kg)?
CAUTION:
DO NOT install
into drywall alone
Drywall with
wood studs?
Perfect!
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder
Screwdriver
Tape
Measure
1/8 in.
(3 mm)
Wood
Drill Bit
Electric
Drill Hammer
7/16 in.
(11 mm)
Socket
Wrench Drill Bit
3/8 in.
(10 mm)
Concrete
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service.
CAUTION: Avoid potential personal injury or property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Solid concrete or
concrete block?
Perfect!
Unsure?
Call Customer Service:
• 800-359-5520
• P: +31 (0) 495 580 852
• UK: 0800 056 2853
No
—
Perfect!
Yes
—
This mount is NOT compatible. Visit secura-av.com or call to find a compatible mount.
US: 800-359-5520 • EMEA: +31 (0) 495 580 852 • UK: 0800 056 2853
3
Dimensions
421.4mm
16.59in
714.2mm
28.12in
54mm
2.12in
100mm
3.94in
600mm
23.62in
100mm
3.94in
400mm
15.75in
677.2mm
26.66in
OPENING
100mm
3.94in
65.4mm
2.57in
OPENING
406.4mm
16.00in
609.6mm
24.00in
SIMULATED
55" TV
5deg
10deg
TV INTERFACE
WALL PLATE
FULLY ASSEMBLED MOUNT
3-D
TOP VIEW - RETRACTED
SIDE VIEW - TILT RANGE
No
—
Perfect!
Yes
—
This mount is NOT compatible. Visit secura-av.com or call to find a compatible mount.
US: 800-359-5520 • EMEA: +31 (0) 495 580 852 • UK: 0800 056 2853
4
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Lag Bolts
22mm
M6 x 12mm M6 x 35mm
M6/M8
2.5mm
M8 x 25mm
M8 x 50mm
M8 x 35mm
M8 x 16mm
Parts and Hardware for STEP 1
TV Screws (qty. 4 each)
[Only one size fits your TV] Washer
(qty. 4 each)
Spacers
[If necessary]
(qty. 4 each)
03
02
01
M6
M8
TV Bracket
04
(qty. 1) 05
(qty. 1)
5
1/4 in.
1/4 x 2¾in.
UX10 x 60R
Parts and Hardware for STEP 2
Lag Bolts
Wall Plate
Washers
Concrete
Anchors
For concrete installations ONLY
CAUTION: Do not use in drywall or wood
Fischer UX10 x 60R
06
(qty. 1)
07
(qty. 4)
08
(qty. 4)
09
(qty. 4)
6
STEP 1: Attach Brackets to TV
1.1 Select TV
Screw Diameter
1.2 Select TV
Screw Length
Too Short
Too Long
CAUTION:
Verify adequate thread
engagement with your screw/
washer/spacer combination
AND TV bracket (STEP 1.3).
- Too short will not hold the TV.
- Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service.
M6
M8
ab03
a: For flat-back TVs,
no spacers 03
required.
b: Spacers 03 supplied for:
●Round (irregular) back TVs
●Extra space needed (for cables
or inset mounting holes)
FLAT BACK ROUND BACK CABLESINSET HOLES
Test the two screw diameters (M6 and
M8) in the threaded inserts on the back
of your TV to determine which screw
diameter fits your TV.
7
1.3 Attach TV Brackets
Center the TV brackets 04 and 05 over your TV hole pattern as shown - making sure the brackets are level.
NOTE: The tilt tension knobs T on TV brackets 04 and 05 should be oriented to the outside edges.
Install using the screw/washer/spacer combination (a) or (b) you selected for your TV.
CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only
enough to secure the TV bracket to the TV. DO NOT overtighten the screws.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step. a Flat Back
b Round Back / Extra Space
03
01
02
02
01
T
IMPORTANT:
After attaching the
brackets, adjust
the straps so they
are level with the
bottom of the TV.
04
05
8
Position the wall plate 06 at your desired height and line up the holes
with your stud center line. Level and mark the four hole locations.
Verify and mark the CENTER of the stud by finding the stud edges
using an awl, a thin nail, or an edge to edge stud finder.
12
Min. 16 in.
(406 mm)
Max. 5/8 in.
(16 mm)
CAUTION: Avoid potential personal injury or property damage!
• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
• Minimum horizontal space between fasteners: 16 in. (406 mm)
STEP 2A: Attach Wall Plate [Wood Stud Installation]
06
9
4
3
07 08
Install wall plate 06 using four lag bolts 07 and four washers 08 .
Tighten the lag bolts only until they are pulled firmly against the wall plate.
CAUTION: Avoid potential personal injury or property damage!
All four lag bolts 07 MUST BE firmly tightened to prevent unwanted
movement of the wall plate 06 . Ensure the wall plate is securely
fastened to the wall before continuing on to the next step.
Go to STEP 3 on PAGE 12.
Drill four pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm).
Be sure to drill into the center of the studs.
2¾ in. (70 mm)
1/8 in.
(3 mm)
06
10
Position the wall plate 06 on the wall at your desired height. Level
the wall plate and mark the four hole locations.
Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
Never drill into the mortar between blocks.
21
Min.
16 in. (406 mm)
3/8 in.
(10 mm)
3 in. (75 mm)
CAUTION: Avoid potential personal injury or property damage!
• Mount the wall plate 06 directly onto the concrete surface
• Minimum solid concrete thickness: 8 in. (203 mm)
• Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
• Minimum horizontal space between fasteners: 16 in. (406 mm)
STEP 2B: Attach Wall Plate [
Solid Concrete or Concrete Block Installation
]
06
Tabla de contenidos
Otros manuales de Soporte de TV de Secura
Secura
Secura QLF210 Manual de usuario
Secura
Secura QSL22 Manual de usuario
Secura
Secura QMF320-B2 Manual de usuario
Secura
Secura QMF110-B2 Manual de usuario
Secura
Secura QMF107 Manual de usuario
Secura
Secura QLF418-B2 Manual de usuario
Secura
Secura QLL22 Manual de usuario
Secura
Secura QML22 Manual de usuario
Secura
Secura QST25 Manual de usuario
Secura
Secura QLTK1 Manual de usuario
Secura
Secura QSF207 Manual de usuario
Secura
Secura QLF214 Manual de usuario
Secura
Secura QMT25 Manual de usuario
Secura
Secura QLF315-B2 Manual de usuario
Secura
Secura QMT35-B2 Manual de usuario
Secura
Secura QLF314-B2 Manual de usuario
Secura
Secura QLF215 Manual de usuario
Secura
Secura QMT15 Manual de usuario
Secura
Secura QSF210 Manual de usuario
Secura
Secura QLL23 Manual de usuario
