Seco SBC-A62-J Manual de usuario

SBC-A62-J

Single Board Computer

with NXP i.MX6 Processor

SBC-A62-J

Unauthorized use, duplication, modification or disclosure of the information to a third-party by any means without prior consent of SECO S.r.l. is prohibited.

Every effort has been made to ensure the accuracy of this manual. However, SECO S.r.l. accepts no responsibility for any inaccuracies, errors or omissions herein.

SECO S.r.l. reserves the right to change precise specifications without prior notice to supply the best product possible.

For further information on this module or other SECO products, but also to get the required assistance for any and possible issues, please contact us using the

dedicated web form available at http://www.seco.com (registration required).

Our team is ready to assist.

Revision

Date

Note

Ref

1.0

18th May 2015

First Official Release.

1.1

11th June 2015

J29 connector pinout corrected

1.2

9th September 2015

J27 jumper description added. Minor corrections.

2.0

17th February 2016

Product name change. Power rail names updated.

2.1

28th July 2016

description updated.

2.2

10th May 2017

Specifications updated (i.MX6Dual Plus added)

Typo corrected in paragraph 3.3.17

2.3

4th August 2017

Typo corrected in paragraph 3.3.2 (wrong mating connector s part number)

REVISION HISTORY

SBC-A62-J

INDEX

INTRODUCTION.......................................................................................................................................................................... 5Chapter 1.

1.1 Warranty........................................................................................................................................................................................................................................ 6

1.2 Information and assistance............................................................................................................................................................................................................. 7

1.3 RMA number request..................................................................................................................................................................................................................... 7

1.4 Safety............................................................................................................................................................................................................................................ 8

1.5 Electrostatic discharges ................................................................................................................................................................................................................. 8

1.6 RoHS compliance.......................................................................................................................................................................................................................... 8

1.7 Terminology and definitions ............................................................................................................................................................................................................9

1.8 Reference specifications ..............................................................................................................................................................................................................11

OVERVIEW ............................................................................................................................................................................... 12Chapter 2.

2.1 Introduction..................................................................................................................................................................................................................................13

2.2 Technical specifications ...............................................................................................................................................................................................................14

2.3 Electrical specifications ................................................................................................................................................................................................................15

2.3.1 RTC Battery.........................................................................................................................................................................................................................15

2.3.2 Power rails...........................................................................................................................................................................................................................16

2.4 Mechanical specifications............................................................................................................................................................................................................. 17

2.5 Block diagram..............................................................................................................................................................................................................................18

CONNECTORS......................................................................................................................................................................... 19Chapter 3.

3.1 Introduction..................................................................................................................................................................................................................................20

3.2 Connectors overview ...................................................................................................................................................................................................................21

3.3 Connectors description................................................................................................................................................................................................................22

3.3.1 LVDS + backlight connector................................................................................................................................................................................................. 22

3.3.2 I2C Touch Screen Connector...............................................................................................................................................................................................23

3.3.3 Optional HDMI connector.....................................................................................................................................................................................................24

3.3.4 Optional Camera connector .................................................................................................................................................................................................25

3.3.5 Ethernet connector ..............................................................................................................................................................................................................26

3.3.6 USB ports............................................................................................................................................................................................................................27

3.3.7 S-ATA connectors (i.MX6DP and i.MX6Q versions only)........................................................................................................................................................28

3.3.8 μSD card slot ......................................................................................................................................................................................................................29

3.3.9 Optional Audio Jacks ...........................................................................................................................................................................................................30

SBC-A62-J

3.3.10 CAN Bus connector.............................................................................................................................................................................................................30

3.3.11 Optional FAN/GPIO connector..............................................................................................................................................................................................30

3.3.12 Recovery jumper JP1...........................................................................................................................................................................................................31

3.3.13 Boot Selection jumper J27...................................................................................................................................................................................................31

3.3.14 Power and Reset buttons.....................................................................................................................................................................................................31

3.3.15 Expansion connector ...........................................................................................................................................................................................................32

3.3.16 Optional JTAG connector.....................................................................................................................................................................................................34

3.3.17 Debug UART connector....................................................................................................................................................................................................... 34

APPENDICES............................................................................................................................................................................ 35Chapter 4.

4.1 Thermal Design............................................................................................................................................................................................................................36

4.2 Accessories.................................................................................................................................................................................................................................37

4.2.1 RS-232 programming kit......................................................................................................................................................................................................37

4.2.2 WiFi Modules.......................................................................................................................................................................................................................37

4.2.3 Cabled RTC battery. ............................................................................................................................................................................................................38

4.2.4 CSI Dongle Camera VA09....................................................................................................................................................................................................38

SBC-A62-J

Chapter 1.

Warranty

Information and assistance

RMA number request

Safety

Electrostatic discharges

RoHS compliance

Terminology and definitions

Reference specifications

SBC-A62-J

1.1Warranty

This product is subject to the Italian Law Decree 24/2002, acting European Directive 1999/44/CE on matters of sale and warranties to consumers.

The warranty on this product lasts for 1 year.

Under the warranty period, the Supplier guarantees the buyer assistance and service for repairing, replacing or credit of the item, at the Supplier’s own discretion.

Shipping costs that apply to non-conforming items or items that need replacement are to be paid by the customer.

Items cannot be returned unless previously authorized by the supplier.

The authorization is released after completing the specific form available on the web-site http://www.seco.com/en/prerma (RMA Online). The RMA authorization

number must be put both on the packaging and on the documents shipped with the items, which must include all the accessories in their original packaging, with

no signs of damage to, or tampering with, any returned item.

The error analysis form identifying the fault type must be completed by the customer and has must accompany the returned item.

If any of the above mentioned requirements for RMA is not satisfied, the item will be shipped back and the customer will have to pay any and all shipping costs.

Following a technical analysis, the supplier will verify if all the requirements, for which a warranty service applies, are met. If the warranty cannot be applied, the

Supplier will calculate the minimum cost of this initial analysis on the item and the repair costs. Costs for replaced components will be calculated separately.

Warning!

All changes or modifications to the equipment not explicitly approved by SECO S.r.l. could impair the equipment’

s functionalities and could void

the warranty

SBC-A62-J

1.2Information and assistance

What do I have to do if the product is faulty?

SECO S.r.l. offers the following services:

SECO website: visit http://www.seco.com to receive the latest information on the product. In most of the cases it is possible to find useful information to

solve the problem.

SECO Sales Representative: the Sales Rep can help to determine the exact cause of the problem and search for the best solution.

SECO Help-Desk: contact SECO Technical Assistance. A technician is at disposal to understand the exact origin of the problem and suggest the correct

solution. E-mail: technical.servic[email protected]

Fax (+39) 0575 340434

Repair center: it is possible to send the faulty product to the SECO Repair Centre. In this case, follow this procedure:

oReturned items must be accompanied by a RMA Number. Items sent without the RMA number will be not accepted.

oReturned items must be shipped in an appropriate package. SECO is not responsible for damages caused by accidental drop, improper usage, or

customer neglect.

Note: Please have the following information before asking for technical assistance:

Name and serial number of the product;

Description of Customer’s peripheral connections;

Description of Customer’s software (operative system, version, application software, etc.);

A complete description of the problem;

The exact words of every kind of error message encountered.

1.3RMA number request

To request a RMA number, please visit SECO’s web-site. On the home page, please select “RMA Online”and follow the procedure described.

A RMA Number will be sent within 1 working day (only for on-line RMA requests).

SBC-A62-J

Whenever handling a SBC-A62-J board, ground yourself through an anti-static wrist strap. Placement of the board on an anti-static

surface is also highly recommended.

1.4Safety

The SBC-A62-J board uses only extremely-low voltages.

While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.

1.5 Electrostatic discharges

The SBC-A62-J board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all

the devices and/or components on-board.

1.6 RoHS compliance

The SBC-A62-J board is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant.

Always switch the power off, and unplug the power supply unit, before handling the board and/or connecting cables or other

boards.

Avoid using metallic components - like paper clips, screws and similar - near the board when connected to a power supply, to avoid

short circuits due to unwanted contacts with other board components.

If the board has become wet, never connect it to any external power supply unit or battery.

Check carefully that all cables are correctly connected and that they are not damaged.

SBC-A62-J

1.7 Terminology and definitions

AC’97 Audio Codec’97, a standard for audio hardware codecs developed by Intel®in 1997

AHCI Advanced Host Controller Interface, a standard which defines the operation modes of SATA interface

API Application Program Interface, a set of commands and functions that can be used by programmers for writing software for specific Operating

Systems

CAN Bus Controller Area network, a protocol designed for in-vehicle communication

CEC Consumer Electronics Control, an HDMI feature which allows controlling more devices connected together by using only one remote control

CSI2 MIPI Camera Serial Interface, 2nd generation standard regulating communication between a peripheral device (camera) and a host processor

DDC Display Data Channel, a kind of I2C interface for digital communication between displays and graphics processing units (GPU)

DDR Double Data Rate, a typology of memory devices which transfer data both on the rising and on the falling edge of the clock

DDR3 DDR, 3rd generation

FFC/FPC Flexible Flat Cable / Flat Panel Cable

GBE Gigabit Ethernet

Gbps Gigabits per second

GND Ground

GPI/O General purpose Input/Output

HDMI High Definition Multimedia Interface, a digital audio and video interface

I2C Bus Inter-Integrated Circuit Bus, a simple serial bus consisting only of data and clock line, with multi-master capability

LVDS Low Voltage Differential Signaling, a standard for transferring data at very high speed using inexpensive twisted pairs copper cables, usually used

for video applications

MAC Medium Access Controller, the hardware implementing the Data Link Layer of ISO/OSI-7 model for communication systems

Mbps Megabits per second

MIPI Mobile Industry Processor Interface Alliance

MMC/eMMC MultiMedia Card / embedded MMC, a type of memory card, having the same interface of SD. The eMMC are the embedded version of the

MMC. They are devices that incorporate both the memory controller and the flash memories on a single BGA chip

N.A. Not Applicable

N.C. Not Connected

OpenCL Open Computing Language, a software library based on C99 programming language, conceived explicitly to realise parallel computing using

Graphics Processing Units (GPU)

SBC-A62-J

OpenGL Open Graphics Library, an Open Source API dedicated to 2D and 3D graphics

OpenVG Open Vector Graphics, an Open Source API dedicated to hardware accelerated 2D vector graphics

OS Operating System

OTG On-the-Go, a specification that allows to USB devices to act indifferently as Host or as a Client, depending on the device connected to the port

PHY Abbreviation of Physical, it is the device implementing the Physical Layer of ISO/OSI-7 model for communication systems

PSU Power Supply Unit

PWM Pulse Width Modulation

PWR Power

RGMII Reduced Gigabit Media Independent Interface, a particular interface defining the communication between an Ethernet MAC and a PHY

SATA Serial Advance Technology Attachment, a differential half duplex serial interface for Hard Disks

SD Secure Digital, a memory card type

SM Bus System Management Bus, a subset of the I2C bus dedicated to communication with devices for system management, like a smart battery and

other power supply-related devices

SPI Serial Peripheral Interface, a 4-Wire synchronous full-duplex serial interface which contemplates a master and one or more slaves, individually

enabled through a Chip Select line

TBM To be measured

TMDS Transition-Minimized Differential Signaling, a method for transmitting high speed serial data, normally used on DVI and HDMI interfaces

TTL Transistor-transistor Logic

USB Universal Serial Bus

uSDHC Ultra Secure Digital Host Controller

V_REF Voltage reference Pin

Tabla de contenidos

Otros manuales de Placa madre de Seco

Seco

Seco SECOMX-945/N270 Manual de usuario

Seco

Seco Qseven QuadMo747 x2000 Manual de usuario

Seco

Seco Qseven CQ7-A42 Manual de usuario

Seco

Seco SBC-992-pITX Manual de usuario

Seco

Seco SBC Series Manual de usuario

Seco

Seco SBC Series Manual de usuario

Seco

Seco SBC-C57 Manual de usuario

Seco

Seco SECOCQ7-mITX2.0 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario