Seco CCHPC-C78-C Manual de usuario

CCHPC-C78-C

Carrier Board for COM-HPC

compliant client modules

CCOMe-C79

Unauthorized use, duplication, or modification by any means without prior consent of SECO S.p.A. is prohibited.

Every effort has been made to ensure the accuracy of this manual. However, SECO S.p.A. accepts no responsibility for any inaccuracies, errors or omissions herein.

SECO S.p.A. reserves the right to change precise specifications without prior notice to supply the best product possible.

For further information on this module or other SECO products, but also to get the required assistance for any and possible issues, please contact us using the

dedicated web form available at www.seco.com (registration required).

Our team is ready to assist.

Revision

Date

Note

Rif

1.0

6th February 2023

First Official Release

1.1

2nd March 2023

Included Engineering Samples Policy

REVISION HISTORY

 
 CCOMe-C79 
CCOMe-C79 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by E.S. Copyright © 2021 SECO S.p.A. 
3 
INDEX 
 INTRODUCTION.................................................................................................................................................................................5 
1.1 Warranty........................................................................................................................................................................................................................................6 
1.2 Information and assistance.............................................................................................................................................................................................................7 
1.3 RMA number request.....................................................................................................................................................................................................................7 
1.4 Safety............................................................................................................................................................................................................................................ 8 
1.5 Electrostatic Discharges................................................................................................................................................................................................................. 8 
1.6 RoHS compliance..........................................................................................................................................................................................................................8 
1.7 Safety Policy.................................................................................................................................................................................................................................. 9 
1.8 Terminology and definitions ..........................................................................................................................................................................................................10 
1.9 Reference specifications ..............................................................................................................................................................................................................12 
 OVERVIEW.......................................................................................................................................................................................13 
2.1 Introduction..................................................................................................................................................................................................................................14 
2.2 Technical Specifications...............................................................................................................................................................................................................15 
2.3 Electrical Specifications................................................................................................................................................................................................................ 16 
 Smart Battery SM Bus Connector.........................................................................................................................................................................................18 
 Coin cell battery holder.........................................................................................................................................................................................................18 
 Power Rails meanings..........................................................................................................................................................................................................19 
2.4 Mechanical Specifications............................................................................................................................................................................................................20 
2.5 Block Diagram .............................................................................................................................................................................................................................21 
 CONNECTORS................................................................................................................................................................................22 
3.1 Connectors placement.................................................................................................................................................................................................................23 
3.2 Connectors overview ...................................................................................................................................................................................................................25 
 Connectors list.....................................................................................................................................................................................................................25 
 Jumpers and switch list........................................................................................................................................................................................................ 26 
3.3 Connectors description................................................................................................................................................................................................................27 
 COM Express module connectors......................................................................................................................................................................................27 
 PCI-e Slots..........................................................................................................................................................................................................................39 
 eSPI Debug Connector........................................................................................................................................................................................................54 
 COM ports #0 #1 internal pin Headers .................................................................................................................................................................................54 
 COM ports #2 #3 internal pin Headers .................................................................................................................................................................................56 

 
 CCOMe-C79 
CCOMe-C79 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by E.S. Copyright © 2021 SECO S.p.A. 
4 
 USB ports............................................................................................................................................................................................................................57 
 SATA connectors.................................................................................................................................................................................................................59 
 Front Panel Header..............................................................................................................................................................................................................59 
 Feature pin Header ..............................................................................................................................................................................................................60 
 External BIOS SPI Flash header............................................................................................................................................................................................61 
 GPIO pin header..................................................................................................................................................................................................................61 
 FAN Connector....................................................................................................................................................................................................................62 
 External EEPROM I2C Flash socket......................................................................................................................................................................................62 
 Audio Section......................................................................................................................................................................................................................63 
 eDP Connector....................................................................................................................................................................................................................64 
 DP++ Connectors................................................................................................................................................................................................................ 65 
 POST Code Display.............................................................................................................................................................................................................65 
 Buttons................................................................................................................................................................................................................................65 
 BMC Connector ..................................................................................................................................................................................................................66 
 Networking ..........................................................................................................................................................................................................................67 
Reserved / FuSa Header.....................................................................................................................................................................................................................69 
 CSI Camera Connectors......................................................................................................................................................................................................70 
 Appendices .....................................................................................................................................................................................71 
4.1 Thermal Design............................................................................................................................................................................................................................72 
4.2 Accessories.................................................................................................................................................................................................................................73 
 
 

CCOMe-C79

•Warranty

•Information and assistance

•RMA number request

•Safety

•Electrostatic Discharges

•RoHS compliance

•Safety Policy

•Terminology and definitions

•Reference specifications

CCOMe-C79

1.1Warranty

This product is subject to the Italian Law Decree 24/2002, acting European Directive 1999/44/CE on matters of sale and warranties to consumers.

The warranty on this product lasts for 1 year.

Under the warranty period, the Supplier guarantees the buyer assistance and service for repairing, replacing or credit of the item, at the Supplier’s own discretion.

Shipping costs that apply to non-conforming items or items that need replacement are to be paid by the customer.

Items cannot be returned unless previously authorised by the supplier.

The authorisation is released after completing the specific ticketing procedure https://support.seco.com/ (web RMA). The RMA authorisation number must be put

both on the packaging and on the documents shipped with the items, which must include all the accessories in their original packaging, with no signs of damage to,

or tampering with, any returned item.

The error analysis form identifying the fault type must be completed by the customer and has must accompany the returned item.

If any of the above-mentioned requirements for RMA is not satisfied, the item will be shipped back and the customer will have to pay any and all shipping costs.

Following a technical analysis, the supplier will verify if all the requirements, for which a warranty service applies, are met. If the warranty cannot be applied, the

Supplier will calculate the minimum cost of this initial analysis on the item and the repair costs. Costs for replaced components will be calculated separately.

SECO offers Engineering Samples for early evaluation and development. - no warranty of any kind, neither explicit nor implied.

Here https://www.seco.com/it/EngineeringSamplesPolicy is defined the framework of SECO and customer responsibilities regarding Engineering Samples.

Warning!

All changes or modifications to the equipment not explicitly approved by SECO S.p.A. could impair the equipments and could void the warranty

CCOMe-C79

1.2Information and assistance

What do I have to do if the product is faulty?

SECO S.p.A. offers the following services:

•SECO website: visit http://www.seco.com to receive the latest information on the product. In most of the cases it is possible to find useful information to

solve the problem.

•SECO Sales Representative: the Sales Rep can help to determine the exact cause of the problem and search for the best solution.

•SECO Help-Desk: contact SECO Technical Assistance. A technician is at disposal to understand the exact origin of the problem and suggest the correct

solution. E-mail: technical.se[email protected]

Fax (+39) 0575 350210

•Repair center: it is possible to send the faulty product to the SECO Repair Centre. In this case, follow this procedure:

oReturned items must be accompanied by a RMA Number. Items sent without the RMA number will be not accepted.

oReturned items must be shipped in an appropriate package. SECO is not responsible for damages caused by accidental drop, improper usage, or

customer neglect.

Note: Please have the following information before asking for technical assistance:

-Name and serial number of the product;

-Description of Customer’s peripheral connections;

-Description of Customer’s software (operating system, version, application software, etc.);

-A complete description of the problem;

-The exact words of every kind of error message encountered.

1.3RMA number request

To request a RMA number, please visit SECO’s web-site. On the home page, please select “RMA Online”and follow the procedure described.

A RMA Number will be sent within 1 working day (only for on-line RMA requests).

CCOMe-C79

1.4Safety

The board uses only extremely low voltages.

While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.

1.5 Electrostatic Discharges

The board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all the devices

and/or components on-board.

1.6 RoHS compliance

The board is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant.

Always switch the power off, and unplug the power supply unit, before handling the board and/or connecting cables or other boards.

Avoid using metallic components - like paper clips, screws and similar - near the board when connected to a power supply, to avoid

short circuits due to unwanted contacts with other board components.

If the board has become wet, never connect it to any external power supply unit or battery.

Check carefully that all cables are correctly connected and that they are not damaged.

Whenever handling this product, ground yourself through an anti-static wrist strap. Placement of the board on an anti-static surface is

also highly recommended.

CCOMe-C79

1.7 Safety Policy

In order to meet the safety requirements of EN62368-1:2014 standard for Audio/Video, information and communication technology equipment, this product shall

be: -installed inside a fire enclosure made of non-combustible material or V-1 material;

-installed inside an enclosure compliant with all applicable IEC 62368-1 requirements;

-Use an ATX standard power supply unit compliant with the reference safety standard for the product;

The manufacturer which includes this product in his end-user product shall respect the previous and following points:

-Install the board inside an enclosure provided with the symbol IEC 60417-5041 (element 1a according to clause 9.5.2 of the IEC 62368-1) on the external

part and that must be placed also on end- ual;

-Verify the compliance with B.2 and B.3 clauses of the EN62368-1 standard when the module works in its own final operating condition;

-Prescribe temperature and humidity range for operating, transport and storage conditions;

-Prescribe to perform maintenance on the board only when it is off and has already cooled down;

-Prescribe the use of the board with a power source classified ES1 according to the requirements of IEC EN 62368-1;

-The board in its enclosure must be evaluated for temperature and airflow considerations;

-Install in a way that prevents the access to the board from children;

-Use along with CPU heatspreader/heatsinks designed according to the thermal and mechanical characteristics;

CCOMe-C79

1.8 Terminology and definitions

ACPI Advanced Configuration and Power Interface, an open industrial standard for the board’s devices configuration and power management

BIOS Basic Input / Output System, the Firmware Interface that initializes the board before the OS starts loading

CEC Consumer Electronics Control, an HDMI feature which allows controlling more devices connected together by using only one remote control

DDC Display Data Channel, a kind of I2C interface for digital communication between displays and graphics processing units (GPU)

DP Display Port, a type of digital video display interface

DVI Digital Visual interface, a type of digital video display interface

eDP embedded Display Port, a type of digital video display interface developed especially for internal connections between boards and digital displays

GbE Gigabit Ethernet

Gbps Gigabits per second

GND Ground

GPI/O General purpose Input/Output

HD Audio High Definition Audio, most recent standard for hardware codecs developed by Intel®in 2004 for higher audio quality

HDMI High Definition Multimedia Interface, a digital audio and video interface

I2C Bus Inter-Integrated Circuit Bus, a simple serial bus consisting only of data and clock line, with multi-master capability

JTAG Joint Test Action Group, common name of IEEE1149.1 standard for testing printed circuit boards and integrated circuits through the Debug port

LPC Bus Low Pin Count Bus, a low speed interface based on a very restricted number of signals, deemed to management of legacy peripherals

LVDS Low Voltage Differential Signalling, a standard for transferring data at very high speed using inexpensive twisted pair copper cables, usually used

for video applications

Mbps Megabits per second

N.A. Not Applicable

N.C. Not Connected

OS Operating System

PCI-e Peripheral Component Interface Express

PWM Pulse Width Modulation

PWR Power