SECO-LARM SD-997C-GCQ Manual de usuario

•Electronically secure lockers, cabinets,

cases, and drawers

•

Lock status sensor allows for monitoring

whether doors or drawers are locked

•

Selectable fail-safe/fail-secure operation

•Operating voltage: 12/24 VDC

•

Current draw: 300mA@12VDC,

150mA@24VDC

•

Mounting hardware included

SD-997C-GCQ

Electric Deadbolt Cabinet Lock

Manual

Features:

SECO-LARM Electric Deadbolt Cabinet Lock

2SECO-LARM U.S.A., Inc.

Introduction:

The SECO-LARM Electric Deadbolt Cabinet Lock contains on-site reversible fail-safe/fail-

secure operation and dual voltage settings, allowing for secure installation for lockers,

cabinets, cases and drawers. The built

-in lock status sensor allow for monitoring whether

the cabinet doors are locked.

Specifications:

Overview:

Model

SD-997C-GCQ

Operation

Fail-safe/Fail-secure

Operating voltage

12/24 VDC

Current

Draw

12VDC

300mA

24VDC

150mA

Contact switch

NO/NC

Lock status

Micro-switch

Lock status rating

1A@30VDC

Dimensions

31/4"x13/16"x11/8" (82x30x28 mm)

Parts List:

1x Cabinet lock body

1x Lock plate

1x Manual

7x 1" Wood screws

1x Stainless steel cover

Front

Side

Mounting Holes

(15mm)

31/

(82mm)

11/

(28mm)

13/

(30mm)

15/

(24mm)

29/

(65mm)

11/

(18mm)

13/

(21mm)

(9mm)

(8mm)

SECO-LARM Electric Deadbolt Cabinet Lock

SECO-LARM U.S.A., Inc. 3

Fig.2

Fig.3

Fig.4

Fig.1

1. Remove the 2 holding screws from the back of the lock

body (fig.1).

Remove the lock body and the wires from the solenoid.

Reverse the solenoid direction (fig.2) to either match the

proper fail-safe (fig.3) or fail-secure position (fig.4).

Put the wires back through the access hole.

Replace the screws.

Selecting Fail-safe/Fail-secure Operation:

Fail-safe

Position

Fail-secure

Position

Installation:

1. Set the cabinet lock to either fail-safe or fail-secure by removing the solenoid and reversing its

direction if needed (see "Selecting Fail-safe/Fail-secure Operation" above).

Mount the cabinet lock body. For positioning of mounting holes, refer to "Overview" dimensions

and diagrams (page 2).

Determine the location of the lock plate, ensuring that the hole in the lock plate aligns with the

deadbolt. Install the lock plate with 2 included screws. Check alignment and adjust if necessary.

For wiring instructions, see "Wiring Connections and Diagram" (page 4).

Remove the tape cover and apply the stainless steel cover onto the adhesive tape (Ensure that

the cover is clean and free of oil or dirt before applying).

Lock status

sensor

Stainless

steel cover

Lock plate

Lock body

Tape cover

SECO-LARM Electric Deadbolt Cabinet Lock

4SECO-LARM U.S.A., Inc.

Lock Status Sensor

Wiring Connections and Diagram:

Sample Applications:

Sliding door (case)

Swinging door (cabinet)

Drawer

12VDC

24VDC

Red

Black

Blue

White

Power

Black

Blue

Red

White

Power

Fail-safe wire

connection

Fail-secure

wire connection

Lock status

wire connection

NOTICE: The information and specifications printed in this manual are current at the time of publication. The

SECO

-LARM policy is one of continual development and improvement. For that reason, SECO-

LARM reserves the right to

change specifications without notice.

SECO-LARM is not responsible for misprints.

Trademarks are the property of

SECO

-LARM USA Inc. or their respective owners.

This material may not be reproduced or copied, in whole or

in part, without the written permission of SECO-LARM.

LIMITED WARRANTY:

This SECO-

LARM product is warranted against defects in material and workmanship while

used in normal service for

one (1) year from the date of sale to the original customer. SECO-LARM’s

obligation is limited to

the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO

-LARM.

This Warranty

is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or

alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO

LARM determines that such

equipment is not operating properly as a result of causes other than defects in material and workmanship.

The sole

oblig

ation of SECO-

LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at

SECO

-LARM’s option. In no event shall SECO-

LARM be liable for any special, collateral, incidental, or consequential

personal or property damage

of any kind to the purchaser or anyone else.

SECO-LARM®U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Website: www.seco-larm.com

PITVW2

Phone: (949) 261-2999 | (800) 662-0800

Email: sales@seco-larm.com

MI_SD-997C-GCQ_160412.docx

Blue

White

Yellow

Fig.5

Fig.6

Fig.7

Otros manuales de Cerrar de SECO-LARM

SECO-LARM

SECO-LARM SLI E-941SA-600 Manual de usuario

SECO-LARM

SECO-LARM SD-997A-GBQ Manual de usuario

SECO-LARM

SECO-LARM SD-996C-NUVQ Manual de usuario

SECO-LARM

SECO-LARM E-941SA-1K2PD Manual de usuario

SECO-LARM

SECO-LARM ENFORCER SD-961A-36 Manual de usuario

SECO-LARM

SECO-LARM ENFORCER 600-lb Electromagnetic Lock Series Manual de usuario

SECO-LARM

SECO-LARM E-941S 600 Series Manual de usuario

SECO-LARM

SECO-LARM SD-993B-SS Manual de usuario

SECO-LARM

SECO-LARM SD-962H-8LAQ Manual de usuario

SECO-LARM

SECO-LARM SD-997A-DQ Manual de usuario

SECO-LARM

SECO-LARM SD-994C Manual de usuario

SECO-LARM

SECO-LARM E-941S 600DPSQ Series Manual de usuario

SECO-LARM

SECO-LARM E-941SA-80Q Manual de usuario

SECO-LARM

SECO-LARM SD-231-ND1Q Manual de usuario

SECO-LARM

SECO-LARM E-941SA-600 Manual de usuario

SECO-LARM

SECO-LARM Enforcer E-941SA-300 Manual de usuario

SECO-LARM

SECO-LARM E-942FC-1300 Manual de usuario

SECO-LARM

SECO-LARM E-941SA-1K2PD Manual de usuario

SECO-LARM

SECO-LARM SD-995C-D3Q Manual de usuario

SECO-LARM

SECO-LARM SD-991A-D1Q Manual de usuario

SECO-LARM

SECO-LARM E-941S-600DPSQ Series Manual de usuario

SECO-LARM

SECO-LARM CL-210M-U3BQ Manual de usuario

SECO-LARM

SECO-LARM E-941DA-600Q Manual de usuario

SECO-LARM

SECO-LARM E-946FC-600Q Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario