Back view and cable assignment
2
2.1 AIS6
1. Connection for power supply
Here you can connect the supplied 2-Pin powercable which includes a build-in 0.5A
fuse.
Pin Color Descripon
1 Black - 12 / 24 Volt DC
2 White + 12 / 24 Volt DC
2. Datacable Connector
To insert or retrieve NMEA data, you need to connect the datacable here.
Pin Color Baudrate Descripon
1 Brown 4.800 NMEA Input +
2Red 4.800 NMEA Input +
3 Orange 4.800 NMEA Input +
4 Yellow 4.800 NMEA Input +
5 Green - NMEA Input - (Ground)
6 Blue 38.400 NMEA Output +
7 Purple - Opon
8 White - NMEA Output - (Ground)
3. VHF Antenna IN
Connect your VHF Antenna here (P/L Plug).
Hint: We recommend the VHF-Antenna RA106 (SVB-Art.: 73101)
4. VHF Antenna OUT
Connect your VHF here.
Normally you will need a P/L - P/L connection cable (SVB Art. No.: 95508).
Great connectivity!
The Seatec technology is based on proven and reliable data communication methods. This in-
cludes the sending of AIS NMEA data and receiving of wind, autopilot, depth and speed data.
These information can be integrated from external devices.
5. Thumbscrews
The two included thumbscrews are used to secure the device with the mounting
bracket. This allows also an “upside-down” mounting.
6. Electrical grounding
To avoid mutual interference, the unit must be grounded.
6
1 2 3 4
56
