Sealey GT117 Manual de usuario

PNEUMATIC GLOVE TESTER

MODEL NO: GT117

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

This item is intended for use in the regular testing required of high voltage

electricians protective gloves.

2. i INTRODUCTION

Pneumatic Glove Tester used to carry out a pressure test on electricians high

voltage gloves. Suitable for use with the Sealey HVG1000VL gloves.

Simple manual operation and supplied with two ring clamp seals.

3. i SPECIFICATION

Model no.: ................................................................... GT117

4. OPERATION

IMPORTANT: Before high voltage electricians protective gloves are used, they

should be visually checked, and also tested for air leakage. Any perforation or deterioration to the glove could result in injury or fatality

due to the wearer coming into contact with high voltage electricity.

4.1.  Aftercarryingoutavisualinspectionofthehighvoltageglove,placethecu󰀨endovertheGT117GloveTesterandsecureitinplace

using the rubber rings supplied.

4.2.  Usingtheplungerintheundersideoftheglovetesterinatethegloveuntilithassu󰀩cientpressuretoremainuprightandfreefrom

 creasing(g.1).

NOTE: DO NOTover-inateasdamagetotheglovemayoccur(seeg.2)

4.3.  Checkthegloveinationafteroneminute.Thereshouldbenosignicantlossofpressureandthegloveshouldhaveretainedits

 originalinatedshape.

4.4. Release the rubber securing ring and remove the glove.

NOTE: It is imperative for user safety that high voltage gloves are tested before use. It is the responsibility of the wearer to ensure the

gloves are in a sound condition and are the correct type for the work being carried out. Any glove that is defective must NOT be

used.

4.5. If the item becomes soiled it should be cleaned as soon as possible with soap and water not exceeding 650C and thoroughly dried.

GT117 Issue 1 20/04/18

Original Language Version

Refer to

instruction

manual

fig.1fig.2

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely

unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids

according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Original Language Version

Tabla de contenidos

Otros manuales de Equipo de prueba de Sealey

Sealey

Sealey VS4021 Manual de usuario

Sealey

Sealey BT91/11 Manual de usuario

Sealey

Sealey BT2001 Manual de usuario

Sealey

Sealey BT91/7PF.V2 Manual de usuario

Sealey

Sealey Auto Service VS0271 Manual de usuario

Sealey

Sealey BT2014 Manual de usuario

Sealey

Sealey TA130.V2 Manual de usuario

Sealey

Sealey HBS97.HGV Manual de usuario

Sealey

Sealey VS027.V3 Manual de usuario

Sealey

Sealey VS0275 Manual de usuario

Sealey

Sealey BT91/10 Manual de usuario

Sealey

Sealey BT102.V2 Manual de usuario

Sealey

Sealey VS2058.V2 Manual de usuario

Sealey

Sealey VSE211.V3 Manual de usuario

Sealey

Sealey TA320.V2 Manual de usuario

Sealey

Sealey CT951.V4 Manual de usuario

Sealey

Sealey PPHY Manual de usuario

Sealey

Sealey CT955 V3 Manual de usuario

Sealey

Sealey VS8193 Manual de usuario

Sealey

Sealey BT2101.V2 Manual de usuario

Sealey

Sealey BT2013.V4 Manual de usuario

Sealey

Sealey BT91/7.V4 Manual de usuario

Sealey

Sealey TA120 Manual de usuario

Sealey

Sealey V5402.V2 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario