SeaLevel 8007 Manual de usuario

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

www.sealevel.com PO Box 830 Liberty, SC 29657 864.843.4343

REL-32.PCI User Manual

Part Number 8007

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

SL9082 Revision 7/2006 REL-32.PCIUserManual

TableofContents

INTRODUCTION......................................................................................................................... 1

OTHER SEALEVEL PCI DIGITAL I/O PRODUCTS........................................................................... 1

BEFORE YOU GET STARTED................................................................................................. 2

WHAT’S INCLUDED...................................................................................................................... 2

OPTIONAL ITEMS.......................................................................................................................... 2

SOFTWARE INSTALLATION.................................................................................................. 3

PHYSICAL INSTALLATION.................................................................................................... 5

PROGRAMMING THE REL-32.PCI........................................................................................ 6

PROGRAMMING FOR WINDOWS.................................................................................................... 6

PROGRAMMING FOR LINUX.......................................................................................................... 6

DIGITAL I/O INTERFACE .............................................................................................................. 6

OUTPUT PORTS (REED RELAY).................................................................................................... 6

CONNECTOR AND JUMPER PIN OUT ............................................................................................. 6

JUMPER SETUP OPTIONS .............................................................................................................. 7

OUTPUT PORTS (REED RELAY)PIN ASSIGNMENTS ...................................................................... 8

POWER AND GROUND PIN ASSIGNMENTS .................................................................................... 8

DB-78 FEMALE PIN ASSIGNMENT.............................................................................................. 10

DIRECT HARDWARE CONTROL .................................................................................................. 11

READING THE OUTPUTS ............................................................................................................. 11

WRITING THE OUTPUTS ............................................................................................................. 11

REGISTER DESCRIPTION............................................................................................................. 11

ELECTRICAL CHARACTERISTICS.................................................................................... 12

FEATURES.................................................................................................................................. 12

SPECIFICATIONS......................................................................................................................... 12

EXAMPLE CIRCUITS.............................................................................................................. 13

APPENDIX A - TROUBLESHOOTING ................................................................................. 14

APPENDIX B - HOW TO GET ASSISTANCE ...................................................................... 15

APPENDIX C – SILK SCREEN – 8007 PCB.......................................................................... 16

APPENDIX D - COMPLIANCE NOTICES............................................................................ 17

FEDERAL COMMUNICATIONS COMMISSION STATEMENT ........................................................... 17

WARRANTY............................................................................................................................... 18

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction

The REL-32.PCI provides 32 reed relays that can switch power, data or other

electronic signals for control applications. The outputs provide high quality, long

life, low current (10 Watt maximum), dry contact switch closures. Reed relays are

well suited for low current applications. The relays are normally open, and will close

when energized. The REL-32.PCI is PCI 2.1 bus compliant.

The REL-32.PCI is designed to be used with a variety of Operating Systems

including Windows 98/NT/ME/2000/XP, Linux and DOS. The SeaI/O API

(Application Programmer Interface) included on CD with the REL-32.PCI provides

a variety of useful high-level function calls implemented as a Windows dynamic

link library (DLL) and as a Linux kernel module and library. In addition to the API,

SeaI/O includes sample code and utilities to simplify software development.

Other Sealevel PCI Digital I/O Products

PIO-24.PCI (P/N 8008) - 24 TTL Inputs/Outputs

PIO-32.PCI (P/N 8010) - 32 TTL Inputs/Outputs

PIO-48.PCI (P/N 8005) - 48 TTL Inputs/Outputs

PIO-96.PCI (P/N 8009) - 96 TTL Inputs/Outputs

DIO-16.PCI (P/N 8002) - 8 Reed Relay Outputs/8 Opto-isolated Inputs

REL-16.PCI (P/N 8003) - 16 Reed Relay Outputs

DIO-32.PCI (P/N 8004) - 16 Reed Relay Outputs/16 Opto-isolated Inputs

ISO-16.PCI (P/N 8006) - 16 Opto-isolated Inputs

PLC-16.PCI (P/N 8011) - 8 Form C Relay Outputs/8 Opto-isolated

Inputs

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Before You Get Started

What’s Included

The REL-32.PCI is shipped with the following items. If any of these items is

missing or damaged please contact Sealevel for replacement.

REL-32.PCI Adapter

CA172 6’ DB78M to dual DB37M Cable

Sealevel SeaI/O Software CD

Optional ItemsDepending upon your application, you are likely to find one or more of the

following items useful for interfacing the REL-32.PCI to real-world signals. All

items can be purchased from our website (http://www.sealevel.com) or by calling

(864) 843-4343.

DB-37 Male to DB-37 Female 6’ Cable (Part Number CA112)

−This cable extends the DB-37 connector on the CA172 cable an

additional six feet and is pinned one-to-one.

DB-37 Male/Female Terminal Block (Part Number TB02-KT)

−Break out serial and digital connectors to 37 screw terminals for easy

field connection. The TB02 terminal block is designed with both DB-

37 male and female connectors, therefore; it can be used with any

DB-37 board regardless of the board's port gender.

Cable and Terminal Block Kit (Part Number KT101)

−For convenient and easier ordering, the KT101 includes the TB02-KT

terminal block and CA112 cable in a single kit.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Software Installation

Windows 98/ME/NT/2000/XP Installation

Do not install the Adapter in the machine until the software has been fully

installed.

1. Start Windows.

2. Insert the Sealevel Systems CD in to your CD drive.

3. If ‘Auto-Start’ is enabled for this drive the software will automatically

launch. Otherwise, point your browser to the ‘Index.htm’ on the root

directory of the CD

4. Select ‘Install Software’.

5. Select the Part Number for your adapter from the listing.

6. Select ‘Windows 98/ME/NT/2000/XP’. The setup file will automatically

detect the operating environment and install the proper components. Next

(depending on your browser) select the ‘Run this program from its current

location’ or ‘Open’ option. Follow the information presented on the screens

that follow.

7. A screen may appear with the declaration: “The publisher cannot be

determined due to the problems below: Authenticode signature not found.”

Please select the ‘Yes’ button and proceed with the installation. This

declaration simply means that the Operating System is not aware of the

driver being loaded. It will not cause any harm to your system.

8. During setup the user may specify installation directories and other

preferred configurations. This program also adds entries to the system

registry that are necessary for specifying the operating parameters for each

driver. An uninstall option is also included to remove all registry/INI file

entries from the system.

Windows NT Card Installation: After accomplishing the above steps, bring up

the Control Panel and double-click on the SeaIO Devices icon. To install a new

card, click "Add Port". Repeat this procedure for as many SeaIO cards as you

wish to install.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Linux Installation

Note: You MUST have "root" privileges to install the software and drivers.

1. Login as "root".

2. Mount the CDROM by typing:

mount -t iso4860 /dev/hdc /cdrom

Note Your cdrom may not be /dev/hdc it could be /dev/hda, /dev/hdb, /dev/hdd,

or if you have a SCSI drive /dev/sda, /dev/sdb, /dev/sdc, etc. You may mount the

CDROM to any location, the /cdrom is just a common example.

3. Next change to the directory where you mounted the CDROM:

Ex. cd /cdrom/software/SeaIO/Other/linux

Note: The syntax is case sensitive.

4. Copy seaio .tar.gz to your home directory by typing:

cp seaio .tar.gz ~

5. Change to your home directory by typing:

6. Unmount the drive and then Unzip and Untar the drivers and software by typing:

umount /cdrom

tar -xvzf seaio .tar.gz

7. Change to the SeaIO directory by typing:

cd SeaIO

8. Now compile and prepare the drivers for use:

make install

9. With the system off and unplugged, install your SeaIO PCI card.

10.Plug system back in and boot Linux.

11.Load the driver by typing:

SeaIO -load

The driver has enabled the card and is ready to use, and you now have the option

to run a test utility on it. Skip to section "Using the test software" if you wish to

do so at this time.

To set up Linux to automatically load the driver; refer to a Linux manual

concerning your specific distribution for help.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Physical Installation

The adapter can be installed in any 5V PCI expansion slot.

Do not install the Adapter in the machine until the software has been fully

installed.

1. Turn off PC power. Disconnect the power cord.

2. Remove the PC case cover.

3. Locate an available 5V PCI slot and remove the blank metal slot cover.

4. Gently insert the PCI adapter into the slot. Make sure that the adapter is

seated properly.

5. After the adapter has been installed, the cables should be routed thru the

opening in the bracket. This bracket also features a strain relief function that

should be used to prevent un-expected cable removal.

6. Replace the screw you removed for the blank and use it to secure the adapter

into the slot. (This is required to ensure FCC Part 15 compliance.)

7. Replace the cover.

8. Connect the power cord

The REL-32.PCI is now ready for use.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Programming the REL-32.PCI

Sealevel’s SeaI/O software is provided to assist in the development of reliable

applications for the Sealevel Systems family of digital I/O adapters. Included on the

SeaI/O CD are driver functions for use in accessing the I/O as well as helpful

samples and utilities.

Programming for Windows

The SeaI/O API (Application Programmer Interface) provides a variety of useful

high-level function calls implemented in a Windows dynamic link library (DLL).

The API is defined in the help file (Start/Programs/SeaIO/SeaIO Help) under

“Application Programmers Interface”. This help file also includes detailed

information dealing with installation / removal of the software and information

about latency, logic states, and device configuration.

For C language programmers we recommend using the API to access the REL-

32.PCI. If you are programming in Visual Basic, using the ActiveX control

included with SeaI/O is advised.

Samples and Utilities

A variety of sample programs and utilities (both executable and source code) are

included with SeaI/O. Further documentation on these samples can be found by

selecting “Start/Programs/SeaIO/Sample Application Description”. Information

about where the files are physically stored on your disk is also included in this same

file.

Programming for Linux

SeaI/O for Linux consists of two major parts: a kernel moduleand a library. The

kernel module is a simple IO pass-through device, allowing the library to handle the

more sophisticated functions provided to SeaI/O users. It is provided in a ‘tarball’

format and can easily be compiled and included in the kernel build.

Digital I/O Interface

The REL-32.PCI provides four parallel Reed Relay output ports. The ports are

organized as 1, 2, and 3, 4.

Output Ports (Reed Relay)

Reed relays provide very high quality, long life, low power, dry contact switch

closures. Reed relays are not suited for high current applications, and can be

destroyed by capacitive or inductive load switching. The relays are normally open,

and close when energized.

Connector and Jumper Pin Out

Each relay has two sides, an A-side and B-side. Each side is connected to two

places: the cable, and the jumpers on the top of the board. The tables on the

following pages provide the pin outs for the two DB-37 cable ends and the onboard

jumpers.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Jumper Setup Options

The common on each port may be tied to ground, 5, or 12 volts. Either side of each

relay may then be tied to the common. The 8007 is shipped with all of the jumpers

necessary for all possible configurations. The jumpers are parked on the B-side and

are inactive until configured by the user. An example configuration is shown below:

Port 4: The common is tied to ground (GND).

The A-side of port-4 relay 3 (K27) is tied to the common.

The B-side of port-4 relay 6 (K30) is tied to the common.

Port 3: The common is tied to ground (GND).

The A-side of port-3 relay 2 (K18) is tied to the common.

The A-side of port-3 relay 5 (K21) is tied to the common.

Port 2: The common is tied to 5 volts.

The B-side of port-2 relay 4 (K12) is tied to the common.

Port 1: The common is tied to 12 volts.

The A-side of port-1 relay 1 (K1) is tied to the common.

The A-side of port-1 relay 8 (K8) is tied to the common.

com

Port 4

GND

12V

1 2 3 4 5 6 7 8

com

Port 2

GND

12V

1 2 3 4 5 6 7 8

com

Port 1

GND

12V

1 2 3 4 5 6 7 8

com

Port 3

GND

12V

1 2 3 4 5 6 7 8

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Tabla de contenidos

Otros manuales de Tarjeta PCI de SeaLevel

SeaLevel

SeaLevel ULTRA 530.LPCI Manual de usuario

SeaLevel

SeaLevel 8004e Manual de usuario

SeaLevel

SeaLevel ULTRA 485+2.PCI Manual de usuario

SeaLevel

SeaLevel ACB-232.LPCI Manual de usuario

SeaLevel

SeaLevel ISO-16.PCI Manual de usuario

SeaLevel

SeaLevel 8003e Manual de usuario

SeaLevel

SeaLevel PIO-32.PC Manual de usuario

SeaLevel

SeaLevel VERSA COMM+4.LPCI Manual de usuario

SeaLevel

SeaLevel ULTRA 485.PCI Manual de usuario

SeaLevel

SeaLevel ULTRA COMM+2.LPCI Manual de usuario

SeaLevel

SeaLevel Route 56 Manual de usuario

SeaLevel

SeaLevel 7804e Manual de usuario

SeaLevel

SeaLevel ULTRA COMM+I.PCI 3055 Manual de usuario

SeaLevel

SeaLevel ULTRA COMM+422.PCI Manual de usuario

SeaLevel

SeaLevel ULTRA COMM+I.LPCI Manual de usuario

SeaLevel

SeaLevel PLC-16.PCI Manual de usuario

SeaLevel

SeaLevel COMM+232.PCI Manual de usuario

SeaLevel

SeaLevel ACB-MP.PCI Manual de usuario

SeaLevel

SeaLevel COMM+8.422.PCIe Manual de usuario

SeaLevel

SeaLevel COMM+850.PCI 7104 Manual de usuario

SeaLevel

SeaLevel DIO-16.PCI Manual de usuario

SeaLevel

SeaLevel ACB-MP+4.PCI Manual de usuario

SeaLevel

SeaLevel DUAL SIO 3082 Manual de usuario

SeaLevel

SeaLevel PIO-24.PCI 8008 Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario