Seagate ST9144 Family Manual de usuario

. . . . . . . . . . . . . . . . . . . . . . . . . .

ST9144 Family:

. . . . . . . . . . . . . . . . . . . . . . . . . .

ST9051A, ST9052A,

. . . . . . . . . . . . . . . . . . . . . . . . . .

ST9077A, ST9096A,

. . . . . . . . . . . . . . . . . . . . . . . . ..

ST9144A

. . . . . . . . . . . . . . . . . . . . . . . . . .

Installation Guide

. . . . . . . . . . . . . . . . . . . . . . . . . .

Publication Number: 36182-001, Rev. B

Seagate®, Seagate Technology®, and the Seagate logo are registered

trademarks of Seagate Technology, Inc.

SeaFAX, SeaFONE, SeaBoard, and SeaCacheare trademarks

of Seagate Technology, Inc. Other product names are registered trade-

marks or trademarks of their owners.

Seagate reserves the right to change, without notice, product offerings

or specifications. No part of this publication may be reproduced in any

form without written permission of Seagate Technology, Inc.

Contents

Read Before You Begin . . . . . . . . . . . . . . . . . . 1

Technical support service . . . . . . . . . . . . . . . . . . 2

Installation overview . . . . . . . . . . . . . . . . . . . . . 3

ST9144 family drives . . . . . . . . . . . . . . . . . . . . . 5

AT interface setup . . . . . . . . . . . . . . . . . . . . . . 5

Power management mode descriptions . . . . . . . . . . . 12

Drive mounting . . . . . . . . . . . . . . . . . . . . . . . . 15

Installation trouble-shooting . . . . . . . . . . . . . . . . . 16

Read before you begin...

Verify that system power is off beforeattempting any installation.

Observe static discharge precautions. Keep the drive in its

static-shielded bag until you are ready to complete the installa-

tion.

•Do not touch the circuit board or the I/O connector pins.

•Always handle the drive by the edge or frame. Never apply

pressure to the circuit board or to the drive top cover.

Use a grounded wrist strap at your workstation; if unavailable,

ground yourself frequently by touching the metal chassis of the

system before handling any components. Provide antistatic pad-

ding on all work surfaces. Avoid static-inducing carpeted areas.

Check all items. Examine the drive, cables, mounting hardware

and accessories, documentation, and packaging. If any item is

incorrect, missing or appears damaged, contact your distributor

or dealer immediately.

Important handling note. Improper handling during transit or

shipping accounts for many installationproblems. Alwayshandle

thedrivecarefully.Donotattachanylabelstothedrivetop cover,

as they may prevent proper heat dissipation from the unit.

Warranty. Contact your authorized Seagate distributor or dealer

for warranty information.

Maintenance and repair. Seagate drives do not require any

preventive maintenance. The head/disc assembly is sealed and

does not contain any user-serviceable components. Tampering

with the factory seal voids the warranty. Seagate customer serv-

ice centers are the only facilities authorized to service Seagate

drives.Seagatedoesnotsanction anythird-partyrepairfacilities.

ST9144 Family Installation Guide, Rev. B 1

Shipping. When transporting or shipping a drive, you must use

a Seagate-approved container. Keepyour originalbox. Theyare

easily identified by the

Seagate Approved Package

label. Ship-

pingadriveinanon-approvedcontainervoidsthedrivewarranty.

Seagate service centers may refuse receipt of components im-

properly packaged or obviously damaged in transit. Call your

authorized Seagate distributor to purchase additional boxes.

Seagaterecommendsshippingbyanair-ridecarrierexperienced

in handling computer equipment.

Technical support services

Product technicalsupport isavailable forall Seagate products by

callingtheSeaFAX,SeaFONE,andSeaBOARDservices.These

are toll calls.

SeaFAX: 408/438-2620

You can use a Touch-Tone telephone to access Seagate’s

automated FAX system and select technical support informa-

tion by return FAX. This service is available 24 hours a day,

7 days a week.

SeaFONE: 408/438-8222

The enhanced phone system provides recorded technical

information on selected Seagate products while you are on

hold. Technical support specialists are available to answer

questions from 8:00 AM to 5:00 PM PST, Monday through

Friday. Recordings are accessible 24 hours a day, 7 days

a week.

SeaBOARD:

The Seagate Technical Support Bulletin Board System (BBS)

is available 24 hours a day, 7 days a week. A modem is

required to access this service. Set your communications

software for eight data bits, no parity and one stop bit (8N1).

2 ST9144 Family Installation Guide, Rev. B

With this service you can access:

•Specifications and configuration for Seagate products.

•Reprints of Seagate documentation.

•A directory of information and helpful utilities that you can

download to your own computer.

•The FINDTYPE.EXE utility is designed to make drive installa-

tion easier. It compares the drive’s geometry with all geome-

tries supported by the system BIOS. FINDTYPEeither signals

if an exact match exists between the drive geometry and the

systemBIOS,orrecommendstheclosestdrivetypesupported

by your system BIOS.

BBS Location Modem Number Maximum

Baud Rate

United States 408-438-8771 9600

England 44-62-847-8011 9600

Germany 49-89-140-9331 2400

Singapore 65-292-6973 9600

Australia 61-2-756-2359 9600

Installation overview

Installation of the drive can be divided into distinct phases as

outlined below. Some of these may not be applicable to your

particular installation requirements. Refer to thedrive installation

section for specific information on your drive model.

•CMOS configuration (for AT systems only). Basic informa-

tion about the drive must be entered into the host system

CMOSso that it mayproperly access the drive forreadingand

writing data. The number of heads, cylinders, and sectors per

trackarespecifictoeachdriveandcollectivelydefinethedrive

ST9144 Family Installation Guide, Rev. B 3

geometry. CMOS configuration is system-dependent and is

usually accomplished through a utility such as SETUP.

•Low-level formatting. Seagate AT interface drives are low-

level formatted at the factory anddonot need low-level format-

ting.

Caution. If an installed drive is low-level formatted, all user

datawillbelost.SeagateTechnology,Inc.assumesnoliability

for lost user data.

•Partitioning. A drive can be subdivided into partitions that

behave asindividualdrives within the system. Earlierversions

of DOS (before version 4.0) have a limitation on maximum

drivecapacityandconsequentlyrequirehighercapacitydrives

to be divided into smaller partitions. For DOS users, each

partition is assigned a different letter, for example, C: and D:

for a drive with two partitions.

Use the DOS FDISK utility to partitionthe drive.After thedrive

has been defined in CMOS, you must boot the system to the

floppydrivewithabootableDOSdiskette.ThenruntheFDISK

utility topartition thedrive.RefertoyourDOSmanual forusing

FDISK. Use DOS 3.3 or higher.

•High-level formatting. The last part of the installation proce-

dure is high-level formatting the drive. High-level formatting

verifies the information written by the low-level format and

establishes drive access information used by the system.

High-level formatting in DOS creates the File Allocation Table

(FAT) used by DOS for drive access. The high-level format is

initiatedbytheFORMATcommand.RefertoyourDOSmanual

for instructions on using the FORMAT command.

4 ST9144 Family Installation Guide, Rev. B

ST9144 family AT interface drives

This guide provides installation information for the ST9051A,

ST9052A, ST9077A, ST9096A, and ST9144A drives. All drives

inthisfamilyautomaticallypark theirheadsatpower-down.Refer

to Figure 1.

Caution.These drives are usuallyinstalled in notebookor laptop

systems. These computers require qualified or factory trained

technicianstoperform peripheralupgrades.Besuretoreviewthe

terms and conditionsof your systemwarranty before openingthe

system enclosure.

Default drive geometry

SeagateATinterfacedrivesmimic(translate)otherdrivegeome-

tries. If none of the drive types offered by the CMOSsupport the

number of heads, cylinders and sectors per track shown by the

following table, and your system does not support a “user-de-

fined” drive type, then select a drive type in your system CMOS

with a capacity which is less than or equal to the capacity given

in the “CMOS MBytes” column of the followingtable.

If you do not know which drive types your CMOS supports,

download FINDTYPE.EXE to assist in choosing an appropriate

drive type. Refer to the “Technical Support Services” section in

the front of this guide.

When specifying drive geometry to the system CMOS, different

values may be used for the Cylinders (1,024 max), Read/Write

Heads (16 max), and Sectors per Track (63 max).

ST9144 Family Installation Guide, Rev. B 5

Note that the final drive capacity shown by the CMOS and total

sectors cannot exceed the values indicated in the last column of

the following table as definedby the following equation:

(Sectors)×(Heads)×(Cylinders) ≤ Total Sectors per Drive

IfyourBIOS offersa“customdrive” ora“user-defined”drivetype,

you may use one of the configurations listed below.

Model MBytes

(F) CMOS

MBytes (F) Cyl. R/W

Heads Sect./

Track Total

Sect. /

Drive

ST9051A 42.86 40.87 654 4 32 83,712

ST9051A 42.82 40.84 820 6 17 83,640

ST9052A 42.65 40.67 980 5 17 83,300

ST9077A 64.05 61.09 802 4 39 125,112

ST9096A 85.29 81.34 980 10 17 166,600

ST9144A 127.94 122.02 980 15 17 249,900

The CMOS calculation of drive capacity is based on a variation

of the number of bits in a megabyte, for purposes related to drive

addressing.

When the drive geometry has been entered into the “user-de-

fined” or “custom” drive type, the CMOS may display the calcu-

lated drive capacity. This number should correspond with the

capacity listed in the “CMOS MBytes (F)” column of the table.

Notethatthedriveprovidestheuserwithfullcapacityasspecified

in the “Mbytes (F)” column of the table.

After the high-level formatting has been completed, the drive

capacity can be verified using the DOS CHKDSK utility.

6 ST9144 Family Installation Guide, Rev. B

Supported system BIOS revisions

ThesedrivesareATinterfacecompatibledrives.Thehostsystem

BIOS mustprovidefullsupport fortheAT interfacecommandset.

Consult the system documentation for implementation informa-

tion for your system.

In accordancewith the ATA/CAMspecification, after a hard reset

is received from the host, the BIOS must reset any emula-

tion/translation parameters for the drive.

The ST9144 family AT interface drives use 4 bytes of Error

Correction Code (ECC) with the Read Long/Write Long com-

mands.

Based on the drive type, some system BIOSes look for 7 bytes

of ECC. If your system expects 7 bytes of ECC, some drive

diagnostic programs return false failures (typically time-out er-

rors). Consult your system documentation, or call your system

dealerormanufacturerforinformationonconfiguringyoursystem

to receive 4 bytes of ECC.

ST9144 Family Installation Guide, Rev. B 7

Drive configuration

•Master/Slave configuration. Refer to the table belowto con-

figure up to two drives on a single AT bus.

System Configuration Pins A-B Pins C-D

Drive is Master, no Slave present Removed Removed

Drive is Master,

Seagate Slave present* Removed Installed

Drive is Slave to another

ST9144 Family AT Drive Installed Removed

Reserved Positions (Do Not Use) Installed Installed

*Includes ST125A, ST138A, ST157A, ST1102A, ST1144A,

ST351A,ST3096A,ST3120A,ST3144A,ST9051A,ST9052A,

ST9077A, ST9096A, and ST9144A.

•Power connection. The ST9144 family drives use

+5 Volts DC power supplied to the drive through the interface

connector.Refertothe“44-PinATInterfaceConnectorAssign-

ment” table for specific pin assignments.

Caution. The drive does not use +12 Volts DC power. Make

sure only +5 Volts DC is being supplied to the drive, as

specified in the “44-Pin AT Interface Connector Assignment”

table.

•AttachATinterfacecable.Use a44-pinATinterfaceconnec-

tor cable with two rows of 22 female contacts on 0.079 inch

(2 mm) centers. Pin 20 has been removed on the connector

forkeying purposes. A dual-drivesystemrequires a 44-pin AT

interface daisy-chain cable. Most cables have a stripe down

one side to designate Pin 1.

Make sure Pin 1 on the interface cable connector is aligned to

Pin 1 on the drive interface connector and Pin 1 on the host

connector. The maximum cable length is 18 inches (457 mm).

8 ST9144 Family Installation Guide, Rev. B

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de Seagate

Seagate

Seagate FireCuda 520 Manual de usuario

Seagate

Seagate ST43400N/ND Manual de usuario

Seagate

Seagate Medalist ST31276A Manual de usuario

Seagate

Seagate SV35 Series Manual de usuario

Seagate

Seagate SRD0NF2 Manual de usuario

Seagate

Seagate ST136403LW/LC Manual de usuario

Seagate

Seagate Innov8 Manual de usuario

Seagate

Seagate Exos X 4006 Series Manual de usuario

Seagate

Seagate CHEETAH 18 ST118202LW/LC Manual de usuario

Seagate

Seagate ST373405LC - Cheetah 73.4 GB Hard Drive Manual de usuario

Seagate

Seagate ST95005620AS Manual de usuario

Seagate

Seagate ST320014A Manual de usuario

Seagate

Seagate MARATHON 1680 Manual de usuario

Seagate

Seagate Wireless Plus 1AYBA4 Manual de usuario

Seagate

Seagate BarraCuda Fast SSD Manual de usuario

Seagate

Seagate Cheetah 15K.6 FC ST3146356FC Manual de usuario

Seagate

Seagate ST34573N/W/WD/LW/WC/LC Manual de usuario

Seagate

Seagate MOMENTUS 5400.2 SATA Manual de usuario

Seagate

Seagate ST34371N - Barracuda 4.3 GB Hard Drive Manual de usuario

Seagate

Seagate Barracuda Series Manual de usuario

Seagate

Seagate Exos Enterprise ST8000NM000A Manual de usuario

Seagate

Seagate ST3120025ACE Manual de usuario

Seagate

Seagate ST3146707LW - Cheetah 146 GB Hard Drive Instrucciones de funcionamiento y seguridad

Seagate

Seagate ST973401LC - Savvio 73.4 GB Hard Drive Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario