Seagate ST34342A - Medalist 4.3 GB Hard Drive Manual de usuario

......................................

Medalist 4342 (ST34342A)

... ... ... ... ... ... ... ... ... ... .... ...

Medalist 3232 (ST33232A)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Medalist 2122 (ST32122A)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.. . . . . . .. . . . . . .. . . . . . .. . . . . . .. . . . . .

Installation Guide

... ... ... ... ... ... ... ... ... ... .... ...

-2 Medalist 4342, 3232 and 2122, Rev. C

Publication Number: 21200096-001, Rev. C, October 1998

Seagate, Seagate Technology, the Seagate logo, Medalist and

the Medalist logo are registered trademarks of Seagate Technol-

ogy, Inc. DiscWizard, SeaFAX, SeaFONE, SeaTDD and Sea-

BOARD are either trademarks or registered trademarks of

Seagate Technology, Inc. or one of its subsidiaries. All other

trademarks or registered trademarks are the property of their

respective owners.

Medalist 4342, 3232 and 2122, Rev. C -1

Contents

The easiest way to install your drive.................................... 1

What you need........................................................................ 2

Before you begin .................................................................... 2

Handling precautions............................................................. 3

One drive or two..................................................................... 4

Attaching cables and mounting the drive............................ 6

Configuring your computer................................................... 9

Addressing drive capacity limitations................................ 11

Installation using Disk Manager ......................................... 14

Standard DOS installation ................................................... 16

Additional installation options............................................ 18

Non-ATA compatible slave jumper .................................... 18

Cable select jumper.......................................................... 19

Advanced Disk Manager options........................................ 20

Troubleshooting ................................................................... 23

Alternate capacity jumper................................................. 25

Seagate Technology support services............................... 31

Storing and shipping your drive ......................................... 38

iii

0 Medalist 4342, 3232 and 2122, Rev. C

Medalist 4342, 3232 and 2122, Rev. C 1

The easiest way to install your drive

DiscWizardis Seagate’s exclusive Win-

dows program that makes it easy to install

your Medalistdrive.

DiscWizard helps you configure your new

drive and your computer. It analyzes your

system, lets you select various installation options and creates

customized step-by-step instructions. It also allows older com-

puters to access the full capacity of large hard drives.

You can run DiscWizard to install your new hard drive if:

•You already have an existing, bootable hard drive in your com-

puter with at least 3 Mbytes of available disc space,

and

•You are running Windows 3.

or Windows 95.

If you can run DiscWizard

, follow the instructions on the

DiscWizard diskette to install your drive. If you need addi-

tional information, refer to this installation guide.

If you cannot run DiscWizard, follow the instructions in this

installation guide to install and configure your new drive.

2 Medalist 4342, 3232 and 2122, Rev. C

What you need

•Straight-edge and Phillips screwdrivers

•Four 6-32 UNC drive mounting screws

•An ATA interface cable (max length: 18 inches) with

available 40-pin connector.

•An unused drive power cable for your new drive

•A bootable system diskette

•If you are mounting this 3.5-inch drive in a 5.25-inch drive bay,

you need a mounting adapter or frame kit. Also, you may need

drive mounting rails if your drive bay is not designed for direct

mounting.

Before you begin

•Make sure your computer is turned off before you open the

case.

•Read the handling precautions at the right and inspect the

drive to make sure that it is not damaged.

•Save your foam-lined Seagatedisc drive box. This box has

been approved by Seagate for shipping a Seagate disc drive.

Using any other container or packing material voids your drive

warranty.

Medalist 4342, 3232 and 2122, Rev. C 3

Handling precautions

Disc drives are extremely fragile. Do not drop or jar

your drive.

Keep the drive in its antistatic bag until you are

ready to install it.

Protect your drive from static discharge by making

sure you are well grounded before touching the

drive. We recommend wearing a grounded wrist

strap throughout the installation process. Do not

touch the connectors or any part of the printed cir-

cuit board.

Always handle the drive by its edges or frame.

Do not apply pressure or attach labels to the circuit

board or the top of the drive.

4 Medalist 4342, 3232 and 2122, Rev. C

One drive or two?

If your new Seagatedrive will be the only drive in your computer,

you do not have to change any jumper settings. In this case, skip

ahead to “Attaching Cables and Mounting the Drive,” on page 6.

If you already have one hard drive in your computer and you are

installing a second drive, you must configure one drive as a mas-

ter and the other as a slave.

To configure the drive as a master or one drive only:

•Place a jumper on pins 5 and 6 (see Figure 1 on page 5).

The master drive will be the “boot” drive (drive C), from which

the computer loads system software when it first starts up.

To configure the drive as a slave:

•Remove all the jumpers.

•If you need to change the jumpers on your existing hard drive,

see the Disk Manager online manual, look on the drive label,

or contact the drive manufacturer.

Medalist 4342, 3232 and 2122, Rev. C 5

Figure 1. Master and slave jumper settings

135

246

Slave

Master or single drive

pin 1

4-pin power

connector

40-pin ATA

interface

connector

6 Medalist 4342, 3232 and 2122, Rev. C

Attaching cables and mounting the drive

1. If you are installing a new ATA interface cable, attach one end

of the cable to the interface connector on your computer or

host adapter. The ATA cable must be no more than 18 inches

long.

2. Thread the interface cable through the drive bay and attach

the connector at the end of the interface cable to your new

drive. If you have two drives, attach the second drive to the

second connector.

Figure 2. Attaching the cables

Caution. To avoid damaging the connector pins, make

sure to align pin 1 on the computer or host adapter with

pin 1 on your drive or drives. Pin 1 on the interface

cable is usually indicated by a stripe along the edge of

the cable.

Pin 1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de Seagate

Seagate

Seagate Barracuda 7200.7 ST3120022A Manual de usuario

Seagate

Seagate ST336737LW Manual de usuario

Seagate

Seagate SKYHAWK ST6000VX011 Manual de usuario

Seagate

Seagate Medalist Pro 4520 Manual de usuario

Seagate

Seagate ST225 Manual de usuario

Seagate

Seagate 10K.3 - Savvio 300 GB Hard Drive Manual de usuario

Seagate

Seagate ST173404LW Manual de usuario

Seagate

Seagate Backup Plus Desktop Manual de usuario

Seagate

Seagate BARRACUDA COMPUTE ST8000DMZ04 Manual de usuario

Seagate

Seagate ST9160511NS - Constellation 7200 160 GB Hard... Instrucciones de funcionamiento y seguridad

Seagate

Seagate ST31000322CS - Pipeline HD 1 TB Hard Drive Manual de usuario

Seagate

Seagate ST3120020A Manual de usuario

Seagate

Seagate Exos Enterprise X20 Manual de usuario

Seagate

Seagate Ultra160 Manual de usuario

Seagate

Seagate HAWK 4 Manual de usuario

Seagate

Seagate One Touch Manual de usuario

Seagate

Seagate MEDALIST 275XE Manual de usuario

Seagate

Seagate EXOS ST14000NM0081 Manual de usuario

Seagate

Seagate ST32430W Manual de usuario

Seagate

Seagate BlackArmor NAS 110 Manual de usuario

Seagate

Seagate Pavilion 7700 Manual de usuario

Seagate

Seagate NL35.2 ST3400833NS Manual de usuario

Seagate

Seagate Barracuda 7200.7 ST360019A Manual de usuario

Seagate

Seagate ST3160812SV Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario