Seada SD-MV-CM61 Manual de usuario
S h o w i n g t h e Wo r l d
SD-MV-CM61
4K@60 6X1 Multiviewer with Audio Switching
All Rights Reserved
Version: 02
SD-MV-CM61 4K@60 6X1 Multiviewer
Catalogue
1. Introduction ...........................................................................................................2
2. Feature ...................................................................................................................2
3. Specifications .........................................................................................................3
4. Operation Controls and Functions..........................................................................4
4.1 Front Panel.........................................................................................................4
4.2 Rear Panel ..........................................................................................................5
5. Setup......................................................................................................................6
5.1 Wiring Diagram.........................................................................................6
6. Operating ...............................................................................................................7
6.1 Standby Mode and Work Mode .........................................................................7
6.2 Screen layout Configuration...............................................................................8
6.2.1 Single Window .......................................................................................10
6.2.2 Double Windows....................................................................................11
6.2.3 Triple Windows.......................................................................................13
6.2.4 Quadruple Windows ..............................................................................14
6.3 Output Resolution............................................................................................16
6.4 Audio Setting..........................................................................................17
6.4.1 Audio Input Select..................................................................................17
6.4.2 Audio Outputs........................................................................................18
6.5 Advanced Settings ...........................................................................................19
6.5.1 RS232 Setting.........................................................................................19
6.5.2 IP Obtain ................................................................................................19
6.5.3 WEB Control...........................................................................................20
6.6 Firmware Update..............................................................................................36
6.7 Auto Layout .....................................................................................................37
7. Command List ......................................................................................................39
SD-MV-CM61 4K@60 6X1 Multiviewer
1. Introduction
SD-MV-CM61 is a standard alone Multiview controller, which could accept up to 6 inputs
and combine any 4 onto a multiple-window layout display at the same time. It supports
HDCP, up to 4K@60 input and 4K@60 output.
It also has built-in audio switching with de-embedding in 6X1 mode, 1 SPDIF output and
1 analog output for audio processing.
2. Feature
⚫Multiple inputs: 4 x HDMI, 2 x DisplayPort.
⚫Up to 4 sources on a single screen with up to 4K 60Hz input and output.
⚫Support various resolutions, up to 3840 x 2160 @60Hz.
⚫Support up to 32 layouts including 16 pre-defined layouts and 16 customizable
layouts.
⚫HDCP 2.2 & 1.4 compliant.
⚫Fast input switching
⚫Built-in audio switching with de-embedding in 6X1 mode.
⚫User-friendly Web GUI.
⚫Support various control methods: Front panel, LAN (Web GUI, TCP)
and RS232
⚫Support in application programming (IAP) through Web GUI (LAN) & USB port.
⚫1 U Height, 19” width standard enclosure, rack mountable design.
SD-MV-CM61 4K@60 6X1 Multiviewer
3. Specifications
Video
Input Interface
4 × HDMI IN, 2 x DP IN
Input Specification
HDMI：HDMI 2.0a
DisplayPort: DP1.2a
HDCP: HDMI 2.0, DP 1.4
Input Resolution
Up to 3840 x 2160@60Hz
Input Electrical Level
0.5-1.0 V peak to peak value
Output Interface
1 x HDMI OUT
Output Specification
HDMI 2.0
Output Resolution
Up to 3840 x 2160@60Hz
Output Impedance
100 Ω
DDC Signal
1.2 V peak to peak value
Audio
Input Interface
6 x 3.5mm stereo jack
Output Interface
1 x 3.5mm stereo jack
1 x optical fiber terminal
General
Power Supply
110~240V AC
Power Dissipation
15W
Control Mode
RS232，LAN
Work Temperature
0°C to 35°C (32°F to 95°F)
10% to 90%, no condensation
Storing Temperature
-20°C to 70°C (-4°F to 140°F)
10% to 90%, no condensation
Product size
(L x W x H)
440mm x 272mm x 43.5mm
Product Weight
3.16kg
SD-MV-CM61 4K@60 6X1 Multiviewer
4. Operation Controls and Functions
4.1 Front Panel
ID
Name
Description
1
Input Buttons and
Indicators
Press the buttons 1~6 to select the corresponding
video or audio input. The indicators mean the
corresponding status of the video or audio input.
2
Audio Selection
Button and Indicator
Press this button, then the indicator lights up,
meaning switching between audio outputs.
3
Layout Button and
Indicator
Press this button and the input button 1~6 to select
the first 1-6 default layout
4
Video Window Mode
Button and Indicator
Video window mode selection: single window,
double windows, triple windows, and quadruple
windows. The indicators show which mode is on.
5
Lock
Press this button and indicator lighting up meaning
all the buttons at front panel are locked until
pressing this button again to unlock it.
6
Standby button and
indicator
⚫Switches between standby and working mode.
⚫When this device is switched to the standby
mode, the indicator lights up.
When this device is switched to working mode, the
indicator will be off.
7
Power Indicator
Indicates when the units have power.
SD-MV-CM61 4K@60 6X1 Multiviewer
4.2 Rear Panel
ID
Name
Description
1
Power Socket
Turn the power ON or OFF using this switch. Connect
to an 110/220 AC Power electrical outlet.
2
Optical output
Connect the optical output port to the digital audio
input port of your amplifier
3
Stereo audio output
2 channel analog audio output. Connect to multimedia
system using cable with a 3.5mm jack
4
HDMI output
Connect to a display with HDMI cable
5
Analog audio input
1~6
2 channel stereo analog audio input, Connect a 3.5mm
mini-stereo cable from the Line Out jack on the audio
source to this jack.
6
HDMI input 1~4
Connect video sources to these inputs using HDMI
cables.
7
DisplayPort input
1~2
Connect video sources to these inputs using
DisplayPort cables.
8
USB Port
Upgrading service port
9
IP Cont.
Connect to a PC/laptop/3rd controller via a network
cable for TCP/IP controlling
10
RS-232
Connect to a PC/laptop/3rd controller via a serial cable
for serial commands controlling
SD-MV-CM61 4K@60 6X1 Multiviewer
5. Setup
1. Connect HDMI sources to the input ports (HDMI 1 - HDMI 4), Connect
DisplayPort sources to the input ports (DISPLAYPORT 5 - DISPLAYPORT 6) on
the SD-MV-CM61
2. Connect any analog audio inputs to 3.5mm jack sockets on SD-MV-CM61 if
needed.
3. Connect a screen or any video receiver to the HDMI Output port on SD-MV-
CM61. Make sure the HDMI output resolution is right for the receiver.
4. Connect the audio outputs of SD-MV-CM61 to any speakers or amplifiers if
needed.
5. Connect an RS-232 cable from the RS-232 port on SD-MV-CM61to the RS-232
connector on the serial controller for controlling if needed.
6. Connect an Ethernet cable from the LAN port on the SD-MV-CM61 to a Local
Area Network (LAN) for controlling if needed.
7. Connect the AC power cord to the SD-MV-CM61 and connect the plug to an
available electrical outlet.
5.1 Wiring Diagram
SD-MV-CM61 4K@60 6X1 Multiviewer
6. Operating
6.1 Standby Mode and Work Mode
The “PWR” LED next to the Standby button, on the front panel, indicates the power
state of the SD-MV-CM61. This indicator will be red and remain illuminated if the
power is being supplied to the SD-MV-CM61. If this indicator does not illuminate,
check the connection between the power receptacle on the SD-MV-CM61 and the AC
outlet.
The Standby button could be pressed to enter into Standby mode at any time. When
Standby mode is activated, all front panel back-lit LED indicators are off, except the
Standby indicator and the PWR indicators, until pressing the standby button again to
wake up the unit. There are three ways to wake up the device: pressing Standby button
or using Web GUI or RS232 commands.
SD-MV-CM61 4K@60 6X1 Multiviewer
6.2 Screen layout Configuration
SD-MV-CM61 offers four layout modes: Quadruple Windows, Triple Windows, Double
Windows, and Single Window. The screen configuration is shown as follows.
Press the combination key (LAYOUT + Input 1~6) in the Key Button of the SD-MV-CM61,
corresponding to the four modes above. For example, if you want to use the mode of
quadruple windows, press the button to which LAYOUT + Input 4 is displayed or the
button in the remote, the button indicator on the panel lights up, the picture output to
the display device through HDMI shows quadruple windows, meanwhile, video 1~4
indicators will light up.
SD-MV-CM61 4K@60 6X1 Multiviewer
SD-MV-CM61 can display up to four sources. When multiple sources are displayed on
the screen, each source is regarded as a single window, and each window is defined as
an input. However, we want to define the operation in the single window to introduce
the basic operation before introduction to the operation in multiple windows. In the
following example, six video sources (each of them is displayed as a single picture) are
connected to SD-MV-CM61. When SD-MV-CM61 is delivered from the factory, the
default settings are loaded automatically. (See below)
Tabla de contenidos
Otros manuales de Monitor de Seada
